Version 2.2.

Signed-off-by: NIIBE Yutaka <gniibe@fsij.org>
One more change for Cortex-M3/M4 asm for shorter result.
2021-02-26 09:16:49 +09:00 · 2021-02-26 09:15:18 +09:00 · 2021-02-25 12:52:26 +09:00 · 2021-02-25 10:35:29 +09:00 · 2021-02-19 15:56:43 +09:00 · 2021-02-17 16:24:22 +09:00
66 changed files with 9041 additions and 995 deletions
--- a/44
+++ b/44
@@ -34,42 +34,56 @@ NIIBE Yutaka:
 	chopstx.c, chopstx.h,
 	chopstx-cortex-m.c, chopstx-cortex-m.h,
 	chopstx-gnu-linux.c, chopstx-gnu-linux.h,
-	entry.c,
+        chopstx-riscv32.c, chopstx-riscv32.h,
+	entry.c, entry-cortex-m.c, entry-riscv32.c,
 	eventflag.c, eventflag.h
-    Wrote the drivers mcu/*:
-	chx-gnu-linux.c, chx-mkl27z.c, chx-stm32f0.c, chx-stm32f103.c,
-    	clk_gpio_init-mkl27z.c, clk_gpio_init-stm32f.c,
-	cortex-m.h, mkl27z.h, stm32.h, stm32f103.h,
-	sys-gnu-linux.c,sys-gnu-linux.h,
+    Wrote the drivers under mcu/:
+	chx-gd32vf103.c, chx-gnu-linux.c, chx-mkl27z.c,
+	chx-stm32f0.c, chx-stm32f103.c, chx-stm32l4.c,
+	clk_gpio_init-gd32vf103.c, clk_gpio_init-mkl27z.c,
+    	clk_gpio_init-stm32f.c,	clk_gpio_init-stm32l.c
+	cortex-m.h, gd32vf103.h, mkl27z.h, stm32.h,
+	stm32f103.h, stm32l.h,
+	sys-gnu-linux.c, sys-gnu-linux.h,
 	sys-mkl27z.c, sys-mkl27z.h,
 	sys-stm32f0.c, sys-stm32f0.h
 	sys-stm32f103.c, sys-stm32f103.h,
-	usb-stm32f103.c, usb-mkl27z.c
+	sys-stm32l4.c, sys-stm32l4.h,
+	usb-gd32vf103.c, usb-mkl27z.c,
+	usb-st-common.c, usb-stm32f103.c, usb-stm32l4.c
    Wrote the drivers:
-	controb/adc-mkl27z.c
+	contrib/adc-mkl27z.c,
+	contrib/spi.h, contrib/spi-st.c
    Drew the logo:
 	chopstx.svg, chopstx.png
    Wrote examples:
 	example-led, example-cdc, example-fsm-55, example-fs-bb48,
-	example-usb-serial, example-cdc-gnu-linux
+	example-usb-serial, example-cdc-gnu-linux,
+	example-usart, example-lcd
    Wrote board/*:
+	board-gnu-linux.h,
        board-fst-01sz.h,
 	board-fst-01g.h, board-fst-01.h, board-fst-01-00.h,
 	board-olimex-stm32-h103.h, board-stm8s-discovery.h
 	board-cq-starm.h, board-stbee-mini.h, board-stbee.h,
-
 	board-stm32f0-discovery.h, board-fsm-55.h,
-
-	board-fs-bb48.h
+	board-st-nucleo-l432.h,
+	board-fs-bb48.h,
+	board-blue-pill-g.h,
+	board-longan-nano.h

    For Free Software Initiative of Japan, wrote:
 	contrib/adc-stm32f103.c,
 	contrib/adc-gnu-linux.c

    Under contract of g10 Code GmbH, wrote:
-	mcu/usb-usbip.c
-	contrib/usart-stm32f103.c
-	contrib/ackbtn-stm32f103.c
+	mcu/usb-usbip.c,
+	contrib/ackbtn.h, contrib/ackbtn-stm32f103.c,
+	contrib/usart.h,
+	contrib/usart-common.c, contrib/usart-common-f103.c,
+	contrib/usart-gd32vf103.c,
+	contrib/usart-impl-f103.h, contrib/usart-impl.h,
+	contrib/usart-stm32f103.c, contrib/usart-stm32l4.c,

 Paul Fertser:
    Added Blue Pill support.
--- a/243
+++ b/243
@@ -1,3 +1,246 @@
+2021-02-26  NIIBE Yutaka  <gniibe@fsij.org>
+
+	* VERSION: 2.2
+	* doc/chopstx.texi (VERSION): 2.2.
+
+2021-02-25  NIIBE Yutaka  <gniibe@fsij.org>
+
+	* rules.mk (MCFLAGS): Add -masm-syntax-unified.
+
+	* entry-cortex-m.c (entry): Use Thumb-16 instruction in unified
+	asm syntax.  This means that no output change for Cortex-M0,
+	but change for Cortex-M3/M4 (shorter, different semantics).
+
+	* example-fsm-55/reset.c (reset): Likewise.
+
+	* chopstx-cortex-m.c
+	[__ARM_ARCH_6M__] (involuntary_context_switch): Use unified syntax.
+	[__ARM_ARCH_7M__] (involuntary_context_switch): Use Thumb-16
+	instruction.
+	[__ARM_ARCH_6M__] (chx_handle_intr): Use unified syntax.
+	[__ARM_ARCH_7M__] (chx_handle_intr): Use Thumb-16 instruction.
+	[__ARM_ARCH_6M__] (voluntary_context_switch): Use unified syntax.
+	[__ARM_ARCH_7M__] (svc): Use Thumb-16 instruction.
+
+2021-02-19  NIIBE Yutaka  <gniibe@fsij.org>
+
+	* chopstx-cortex-m.c (chx_handle_intr): Fix SUB instruction.
+
+2021-02-17  NIIBE Yutaka  <gniibe@fsij.org>
+
+	* contrib/adc-gnu-linux.c (adc_start_conversion): Use getrandom.
+
+	* mcu/usb-usbip.c (usbip_run_server): Add start-up message.
+
+2021-02-16  NIIBE Yutaka  <gniibe@fsij.org>
+
+	* contrib/ackbtn-gnu-linux.c: New.
+
+2021-02-12  NIIBE Yutaka  <gniibe@fsij.org>
+
+	* VERSION: 2.1
+	* doc/chopstx.texi (VERSION): 2.1.
+
+2021-02-10  NIIBE Yutaka  <gniibe@fsij.org>
+
+	* example-cdc-gnu-linux/usb-cdc.c (tty_recv): Cancel the input.
+
+	* chopstx.c (chx_recv_irq): Bug fix when no waiter.
+
+	* chopstx-gnu-linux.c (chopstx_create_arch): Fix ARGC of
+	makecontext call.
+	(chx_idle): Support exit by SIGINT or SIGTERM.
+
+2021-02-09  NIIBE Yutaka  <gniibe@fsij.org>
+
+	* chopstx-gnu-linux.c (chopstx_create_arch): Clear TP.
+
+	* example-cdc-gnu-linux/sample.c (main): Handle timeout by canceling
+	input.
+
+	* chopstx-gnu-linux.c (voluntary_context_switch): Fix for the case
+	when chx_idle suggests no context switch (tp_prev == tp_next).
+
+2021-02-08  NIIBE Yutaka  <gniibe@fsij.org>
+
+	* entry-cortex-m.c (vector_table): No use of PENDV exception.
+	Use chx_handle_intr for SysTick.
+	* example-fsm-55/reset.c (vector): Likewise.
+
+	* chopstx-cortex-m.c (preempting): Remove.
+	(CPU_EXCEPTION_PRIORITY_PENDSV): Remove.
+	(chx_interrupt_controller_init): No setup for PENDV.
+	(chx_request_preemption_possibly): Remove.
+	(involuntary_context_switch): New.
+	(chx_timer_handler): Remove.
+	(chx_handle_intr): Use involuntary_context_switch directly.
+	(preempt): Remove.
+
+2021-02-05  NIIBE Yutaka  <gniibe@fsij.org>
+
+	* chopstx-cortex-m.c (preempting): New value to hold the pointer
+	to preempting thread, which will become RUNNING.
+	(chx_request_preemption_possibly): New.
+	(chx_timer_handler, chx_handle_intr): Use the new function.
+	(preempt): Recover R0 from PREEMPTING and clear PREEMPTING.
+	(svc): Don't share return path with preempt.
+
+2021-02-04  NIIBE Yutaka  <gniibe@fsij.org>
+
+	* board/board-fsm-55.h (VAL_GPIO_LED_MODER): Support SWD
+	debugging.
+
+2020-06-26  NIIBE Yutaka  <gniibe@fsij.org>
+
+	* VERSION: 2.0
+	* doc/chopstx.texi (VERSION): 2.0.
+
+2020-06-23  NIIBE Yutaka  <gniibe@fsij.org>
+
+	* chopstx.c (chopstx_critical): New.
+
+2019-12-27  NIIBE Yutaka  <gniibe@fsij.org>
+
+	* contrib/spi-st.c (check_transmit, put_data): Fix handling
+	conditions.
+	[!SPI_USE_INTERRUPT]: Support busy wait mode.
+
+2019-12-27  NIIBE Yutaka  <gniibe@fsij.org>
+
+	* mcu/usb-gd32vf103.c: New.
+
+	* mcu/clk_gpio_init-gd32vf103.c (clock_init): Configure USB clock.
+
+	* mcu/gd32vf103.h (RCU_CFG0_USBFSPSC_DIV2): New.
+
+	* usb_lld.h [MCU_GD32VF1]: Support GD32VF103.
+
+2019-12-27  NIIBE Yutaka  <gniibe@fsij.org>
+
+	* chopstx.c (chopstx_poll): Call CHECK for condition
+	valiable after woken up.
+
+2019-12-04  NIIBE Yutaka  <gniibe@fsij.org>
+
+	* chopstx-gnu-linux.c (chx_thread_start): Fix return value.
+
+2019-12-03  NIIBE Yutaka  <gniibe@fsij.org>
+
+	* rules.mk [ARCH=riscv32] (MCFLAGS, LDFLAGS): Define.
+	(CFLAGS, LDFLAGS): Don't add -m for ARM specific.
+
+	* example-lcd: New.
+
+2019-12-03  NIIBE Yutaka  <gniibe@fsij.org>
+
+	* contrib/usart-gd32vf103.c: New.
+
+	* contrib/usart-common.c (usart_stat, get_usart_dev)
+	(get_usart_rb_h2a, get_usart_rb_a2h, get_usart_intr): Handle
+	when USART_DEVNO_START==0.
+
+	* contrib/usart-stm32f103.c: Use usart-impl.h.
+	Factor out to...
+	* contrib/usart-common-f103.c: New.
+
+	* contrib/usart-stm32l4.c: Factor out definitions into...
+	* contrib/usart-impl.h: New.
+
+2019-12-03  NIIBE Yutaka  <gniibe@fsij.org>
+
+	* board/board-longan-nano.h: New.
+
+	* mcu/gd32vf103.h: New.
+	* mcu/chx-gd32vf103.c: New.
+	* mcu/clk_gpio_init-gd32vf103.c: New.
+
+	* chopstx-riscv32.h: New.
+	* chopstx-riscv32.c: New.
+	* entry-riscv32.c: New.
+
+	* entry-cortex-m.c: Rename from entry.c.
+
+2019-12-03  NIIBE Yutaka  <gniibe@fsij.org>
+
+	* contrib/spi.h: New.
+	* contrib/spi-st.c: New.
+
+	* chopstx.c (chx_timer_expired): When no timer, explicitly call
+	chx_systick_reload with 0.
+
+2019-12-03  NIIBE Yutaka  <gniibe@fsij.org>
+
+	* example-cdc/Makefile (ARCH): Define.
+	* example-cdc-gnu-linux/Makefile (ARCH): Ditto.
+	* example-fraucheky/Makefile (ARCH): Ditto.
+	* example-fs-bb48/Makefile (ARCH): Ditto.
+	* example-fsm-55/Makefile (ARCH): Ditto.
+	* example-led/Makefile (ARCH): Ditto.
+	* example-primer2/Makefile (ARCH): Ditto.
+	* example-usart/Makefile (ARCH): Ditto.
+	* example-usb-serial/Makefile (ARCH): Ditto.
+
+	* chopstx.c: Include files by ARCH_HEADER and ARCH_IMPL.
+	* rules.mk (DEFS): Define ARCH_HEADER and ARCH_IMPL by ARCH.
+
+2019-11-25  NIIBE Yutaka  <gniibe@fsij.org>
+
+	* chopstx-gnu-linux.c (chx_idle): Synchronous IDLE.
+	(chx_idle, idle_stack): Remove.
+	(chx_init_arch): Don't makecontext for IDLE.
+	(preempted_context_switch): Simplify, because no case for
+	interrupting IDLE.
+	(voluntary_context_switch): Simply call chx_idle to get tp_next.
+
+2019-11-22  NIIBE Yutaka  <gniibe@fsij.org>
+
+	* chopstx-gnu-linux.c (preempted_context_switch): Rename.
+
+2019-11-21  NIIBE Yutaka  <gniibe@fsij.org>
+
+	* chopstx.c (chx_sched): New common function.
+
+	* chopstx-cortex-m.c (svc): Simply context switch.
+	(voluntary_context_switch): New, replacing chx_sched.
+	* chopstx-gnu-linux.c (voluntary_context_switch): Likewise.
+
+2019-11-21  NIIBE Yutaka  <gniibe@fsij.org>
+
+	* chopstx.h (CHOPSTX_PRIO_INHIBIT_PREEMPTION): Remove.
+	* chopstx.c (chx_init): Remove support of
+	CHOPSTX_PRIO_INHIBIT_PREEMPTION.
+	(chopstx_setpriority): Likewise.
+
+	* chopstx-cortex-m.c (CPU_EXCEPTION_PRIORITY_PENDSV): Change the
+	value.  Now PendSV exception runs at same priority level of
+	all other exceptions (systick and interrupt exception).
+	(chx_cpu_sched_lock, chx_cpu_sched_unlock):
+	Remove support of CHOPSTX_PRIO_INHIBIT_PREEMPTION.
+	(chx_request_preemption): Change the argument with none.
+	(chx_timer_handler): New.  Use common function of
+	chx_timer_expired, local one, chx_request_preemption.
+	(chx_handle_intr): Use chx_recv_irq.
+	(chx_sched): Remove support of CHOPSTX_PRIO_INHIBIT_PREEMPTION.
+	(preempt): Have an argument from tail-chaining.
+	Remove support of CHOPSTX_PRIO_INHIBIT_PREEMPTION.
+
+	* chopstx-gnu-linux.c (chx_idle): Rename.
+	(chx_init_arch): Follow the rename.
+	(chx_handle_intr): Use chx_recv_irq, chx_running_preempted, and
+	chx_preempt_into.
+	(sigalrm_handler): Use chx_timer_expired, chx_running_preempted,
+	and chx_preempt_into.
+	(chx_preempt_into): Rename from chx_request_preemption, changing
+	argument.  Remove the handling of preempted thread, which should
+	be done by caller using chx_running_preempted, beforehand.
+
+	* entry.c (vector_table): Use chx_timer_handler.
+
+	* chopstx.c (chx_timer_expired): Pop from the ready queue and
+	return the next thread to switch.
+	(chx_recv_irq): New.
+	(chx_running_preempted): New.
+
 2019-11-21  NIIBE Yutaka  <gniibe@fsij.org>

 	* chopstx-cortex-m.c (chx_set_running): New.
--- a/83
+++ b/83
@@ -1,6 +1,89 @@
 NEWS - Noteworthy changes


+* Major changes in Chopstx 2.2
+
+  Released 2021-02-25
+
+** Acknowledge button support for GNU/Linux emulation
+User is asked acknowledge by RET with standard input.
+
+** USB driver for GNU/Linux emulation
+It shows start-up message now.
+
+** ADC driver for GNU/Linux emulation
+It uses getrandom(2), output is not deterministic any more.
+
+** Bug fix for Cortex-M3/M4 Support
+In 2.1, preemption doesn't work well, because of the difference of
+assembler syntax.
+
+
+* Major changes in Chopstx 2.1
+
+  Released 2021-02-12
+
+** GNU/Linux emulation change
+The process can be asked to exit by SIGINT or SIGTERM.
+
+** Bug fix for interrupt handling
+The check to find waiting thread was wrong.  If no waiting thread,
+it failed.
+
+** Bug fix for GNU/Linux emulation
+In 2.0, GNU/Linux emulation doesn't work well with chx_idle when it
+handles interrupt synchronously and the waken thread is the same one
+which called chx_idle.
+
+** Bug fix for Cortex-M0/M3/M4 Support
+In 2.0, Cortex-M0 with no tail-chaining support (e.g. STM32F030)
+doesn't work.  In 2.0, Cortex-M3/M4 may fail when two or more
+interrupts occur simultaneously; A waken thread (which is about to
+preempt RUNNING) by the first interrupt may be lost (and never
+scheduled again), by the second interrupt handling before the call of
+preempt function.
+
+
+* Major changes in Chopstx 2.0
+
+  Released 2020-06-26
+
+** Remove support of CHOPSTX_PRIO_INHIBIT_PREEMPTION
+We used to have (an experimental) feature of higher priority of thread
+(>= CHOPSTX_PRIO_INHIBIT_PREEMPTION).  The feature offered: When a
+thread has such a priority, Chostx guarantees that it keeps running
+and no other threads can preempt the thread.  I had introduced this
+(questionable) feature as an excuse against no support of
+masking/unmasking interrupt API.  From the experience of Chopstx, it
+is rather consistent to remove this feature.  It was over engineering
+to support a thread having such a special priority.
+
+** New function: chopstx_critical
+Let run FUNC with ARG, under CPU scheduler lock (== no preemption).
+
+** RISC-V MCU support
+RISC-V support has been added.  It's for the core named Bumblebee.
+
+
+* Major changes in Chopstx 1.18
+
+  Released 2019-12-30
+
+** Fix of chopstx_poll
+When waiting for a condition variable, we supply CHECK method with a
+descriptor.  Since a condition variable may be fired for multiple
+reasons, old implementation of chopstx_poll may return with wrong
+information saying a condition of CHECK were met but actually not.  It
+should not return when condition is not satisfied and it should not
+give wrong information to application.  Fixed by calling the CHECK
+method again when woken up, and don't return when no condition meet.
+
+** Bug fix for GNU/Linux emulation
+When woken up, return value of chx_sched was wrong.  Because of this,
+timeout handling had problem.  Termination value of a thread was
+wrong.
+
+
 * Major changes in Chopstx 1.17

  Released 2019-11-20
--- a/9
+++ b/9
@@ -1,6 +1,6 @@
 Chopstx - Threads and only Threads
-							Version 1.17
-							  2019-11-20
+							 Version 2.2
+							  2020-02-26
 							Niibe Yutaka
 					     Flying Stone Technology

@@ -9,7 +9,8 @@ What's Chopstx?

 Chopstx is an RT thread library for STM32F103 and GD32F103 (ARM
 Cortex-M3), STM32F030 (ARM Cortex-M0), MKL27Z (ARM Cortex-M0plus),
-STM32L432 (ARM Cortex-M4), and emulation on GNU/Linux.
+STM32L432 (ARM Cortex-M4), GD32VF103 (RISC-V Bumblebee) and emulation
+on GNU/Linux.

 While most RTOSes come with many features, drivers, and protocol
 stacks, Chopstx just offers a simple RT thread library.
@@ -60,8 +61,6 @@ For STM32 Primer2, see the directory: example-primer2.
 Future Works
 ============

-RISC-V port (for GD32VF103) is under development.
-
 Convenience function to determine the bottom of thread stack,
 configuration of thread size by compiler's output would be next things
 to be done.
--- a/2
+++ b/2
@@ -1 +1 @@
-release/1.17
+release/2.1
--- a/board/board-fsm-55.h
+++ b/board/board-fsm-55.h
@@ -19,10 +19,13 @@

 /*
 * Port A setup.
- * PA5  - ON (LED 1:ON 0:OFF)
 * PA4  - Pull DOWN
+ * PA5  - ON (LED 1:ON 0:OFF)
+ *
+ * PA13 - SWDIO
+ * PA14 - SWCLK
 */
-#define VAL_GPIO_LED_MODER   0x00145555 /* Output Pin0-7, Pin9 and Pin10 */
+#define VAL_GPIO_LED_MODER   0x28145555 /* Output Pin0-7, Pin9 and Pin10 */
 #define VAL_GPIO_LED_OTYPER  0x0000001f /* Open-drain for Pin0-4, Push-Pull*/
 #define VAL_GPIO_LED_OSPEEDR 0x003cffff /* High speed */
 #define VAL_GPIO_LED_PUPDR   0x00000000 /* No pull-up/pull-down */
--- a/board/board-longan-nano.h
+++ b/board/board-longan-nano.h
@@ -0,0 +1,75 @@
+#define BOARD_NAME "Longan-nano"
+#define BOARD_ID    0xe65dace7
+/* echo -n "Longan-nano" | sha256sum | sed -e 's/^.*\(........\)  -$/\1/' */
+
+#define MCU_CORE_BUMBLEBEE 1
+#define MCU_GD32VF1        1
+/*
+ * XTAL clock =  8 MHz
+ * Core clock = 96 MHz
+ * AHB  clock = 96 MHz
+ * APB1 clock = 48 MHz
+ * APB2 clock = 96 MHz
+ * USB clock  = 48 MHz
+ * ADC clock  = ???
+ */
+
+/* HXTAL 8MHz input => PLL output = 8 * 12 = 96 MHz */
+#define RCU_CFG0_PLL_MUL_VALUE RCU_CFG0_PLL_MUL12
+
+#define GPIO_LED   GPIOC
+#define GPIO_LED_CLEAR_TO_EMIT     13 /* LED Red */
+#define GPIO_USB   GPIOA
+#define GPIO_OTHER GPIOB
+
+/*
+ * Port A setup.
+ *
+ * PA1  - Push-pull output 2MHz 1 default (LED green 0: ON 1: OFF)
+ * PA2  - Push-pull output 2MHz 1 default (LED blue  0: ON 1: OFF)
+ * PA3  - 
+ * PA4  - <Can be used for GPIO>
+ * PA5  - AF output push-pull 50MHz: SPI0_SCK
+ * PA6  - Input pull-up: SPI0_MISO (master)
+ * PA7  - AF output push-pull 50MHz: SPI0_MOSI (master)
+ * PA8  - (USBFS_SOF)
+ * PA9  - AF output push-pull 2MHz: USART0_TX (USBFS_VBUS)
+ * PA10 - Input pull-up: USART0_RX0 (USBFS_ID)
+ * PA11 - Push Pull output 10MHz 0 default (until USB enabled???) (USBDM)
+ * PA12 - Push Pull output 10MHz 0 default (until USB enabled???) (USBDP)
+ * ------------------------ Default
+ * PAx  - input with pull-up.
+ *
+ * NOTE: It's USB device bus power configuration, where we don't
+ * monitor VBUS voltage change.  For self powered system, we need to
+ * monitor VBUS pin for detecting USB connection.  Supporting self
+ * powered system, you need to change the USB driver, and when doing
+ * so, PA9 should be used for USBFS_VBUS.
+ */
+#define VAL_GPIO_USB_ODR   0xFFFFE6FF
+#define VAL_GPIO_USB_CRL   0xB8B88228      /*  PA7...PA0 */
+#define VAL_GPIO_USB_CRH   0x888118A8      /* PA15...PA8 */
+
+#define RCU_APB2_GPIO      (RCU_APB2_GPIOA|RCU_APB2_GPIOB|RCU_APB2_GPIOC)
+
+/*
+ * PB0 - Push-pull output 50MHz 1 default (OLED D/C#)
+ * PB1 - Push-pull output 10MHz 1 default (OLED RST#)
+ * PB2 - Push-pull output 50MHz 1 default (OLED CS#)
+ */
+#define VAL_GPIO_OTHER_ODR 0xFFFFFFFF
+#define VAL_GPIO_OTHER_CRL 0x88888313      /*  PB7...PB0 */
+#define VAL_GPIO_OTHER_CRH 0x88888888      /* PB15...PB8 */
+
+/*
+ * PC13 - Push-pull output 2MHz 1 default (LED red  0: ON 1: OFF)
+ */
+#define VAL_GPIO_LED_ODR 0xFFFFFFFF
+#define VAL_GPIO_LED_CRL 0x88888888      /*  PC7...PC0 */
+#define VAL_GPIO_LED_CRH 0x88288888      /* PC15...PC8 */
+
+/*
+ * Board specific information other than clock and GPIO initial
+ * setting should not be in board-*.h, but each driver should include
+ * such specific information by itself.
+ */
--- a/chopstx-cortex-m.c
+++ b/chopstx-cortex-m.c
@@ -2,7 +2,7 @@
 * chopstx-cortex-m.c - Threads and only threads: Arch specific code
 *                      for Cortex-M0/M3/M4
 *
- * Copyright (C) 2013, 2014, 2015, 2016, 2017, 2018, 2019
+ * Copyright (C) 2013, 2014, 2015, 2016, 2017, 2018, 2019, 2021
 *               Flying Stone Technology
 * Author: NIIBE Yutaka <gniibe@fsij.org>
 *
@@ -77,7 +77,6 @@ struct chx_stack_regs {
 * Prio 0x40: thread temporarily inhibiting schedule for critical region
 * ...
 * Prio 0xb0: systick, external interrupt
- * Prio 0xc0: pendsv
 * =====================================
 *
 * Cortex-M0
@@ -85,8 +84,7 @@ struct chx_stack_regs {
 * Prio 0x00: thread temporarily inhibiting schedule for critical region
 * ...
 * Prio 0x40: systick, external interrupt
- * Prio 0x80: pendsv
- * Prio 0x80: svc
+ * Prio 0x80: svc (not used)
 * =====================================
 */

@@ -95,18 +93,16 @@ struct chx_stack_regs {
 #if defined(__ARM_ARCH_6M__)
 #define CPU_EXCEPTION_PRIORITY_INHIBIT_SCHED 0x00
 /* ... */
-#define CPU_EXCEPTION_PRIORITY_SYSTICK       CPU_EXCEPTION_PRIORITY_INTERRUPT
-#define CPU_EXCEPTION_PRIORITY_INTERRUPT     0x40
-#define CPU_EXCEPTION_PRIORITY_PENDSV        0x80
+#define CPU_EXCEPTION_PRIORITY_SYSTICK       0x40
+#define CPU_EXCEPTION_PRIORITY_INTERRUPT     CPU_EXCEPTION_PRIORITY_SYSTICK
 #define CPU_EXCEPTION_PRIORITY_SVC           0x80 /* No use in this arch */
 #elif defined(__ARM_ARCH_7M__) || defined(__ARM_ARCH_7EM__)
 #define CPU_EXCEPTION_PRIORITY_SVC           0x30

 #define CPU_EXCEPTION_PRIORITY_INHIBIT_SCHED 0x40
 /* ... */
-#define CPU_EXCEPTION_PRIORITY_SYSTICK       CPU_EXCEPTION_PRIORITY_INTERRUPT
-#define CPU_EXCEPTION_PRIORITY_INTERRUPT     0xb0
-#define CPU_EXCEPTION_PRIORITY_PENDSV        0xc0
+#define CPU_EXCEPTION_PRIORITY_SYSTICK       0xb0
+#define CPU_EXCEPTION_PRIORITY_INTERRUPT     CPU_EXCEPTION_PRIORITY_SYSTICK
 #else
 #error "no support for this arch"
 #endif
@@ -230,63 +226,134 @@ chx_interrupt_controller_init (void)
 {
  *AIRCR = 0x05FA0000 | ( 5 << 8); /* PRIGROUP = 5, 2-bit:2-bit. */
  *SHPR2 = (CPU_EXCEPTION_PRIORITY_SVC << 24);
-  *SHPR3 = ((CPU_EXCEPTION_PRIORITY_SYSTICK << 24)
-	    | (CPU_EXCEPTION_PRIORITY_PENDSV << 16));
+  *SHPR3 = (CPU_EXCEPTION_PRIORITY_SYSTICK << 24);
 }


 static void
 chx_cpu_sched_lock (void)
 {
-  if (running->prio < CHOPSTX_PRIO_INHIBIT_PREEMPTION)
-    {
 #if defined(__ARM_ARCH_6M__)
-      asm volatile ("cpsid	i" : : : "memory");
+  asm volatile ("cpsid	i" : : : "memory");
 #else
-      register uint32_t tmp = CPU_EXCEPTION_PRIORITY_INHIBIT_SCHED;
-      asm volatile ("msr	BASEPRI, %0" : : "r" (tmp) : "memory");
+  register uint32_t tmp = CPU_EXCEPTION_PRIORITY_INHIBIT_SCHED;
+  asm volatile ("msr	BASEPRI, %0" : : "r" (tmp) : "memory");
 #endif
-    }
 }

 static void
 chx_cpu_sched_unlock (void)
 {
-  if (running->prio < CHOPSTX_PRIO_INHIBIT_PREEMPTION)
-    {
 #if defined(__ARM_ARCH_6M__)
-      asm volatile ("cpsie	i" : : : "memory");
+  asm volatile ("cpsie	i" : : : "memory");
 #else
-      register uint32_t tmp = CPU_EXCEPTION_PRIORITY_CLEAR;
-      asm volatile ("msr	BASEPRI, %0" : : "r" (tmp) : "memory");
+  register uint32_t tmp = CPU_EXCEPTION_PRIORITY_CLEAR;
+  asm volatile ("msr	BASEPRI, %0" : : "r" (tmp) : "memory");
 #endif
-    }
 }


-void
+static void __attribute__ ((naked, used))
+involuntary_context_switch (struct chx_thread *tp_next)
+{
+  register struct chx_thread *tp_current asm ("r1");
+
+  asm (
+	"ldr	r2, =running\n\t"
+	"ldr	r1, [r2]"
+	: "=r" (tp_current)
+	: /* no input */
+	: "r2");
+
+  if (!tp_current)
+    /* It's idle thread.  No need to save registers.  */
+    ;
+  else
+    {
+      /* Save registers onto CHX_THREAD struct.  */
+      asm volatile (
+	"adds	%0, #20\n\t"
+	"stm	%0!, {r4, r5, r6, r7}\n\t"
+	"mov	r2, r8\n\t"
+	"mov	r3, r9\n\t"
+	"mov	r4, r10\n\t"
+	"mov	r5, r11\n\t"
+	"mrs	r6, PSP\n\t" /* r13(=SP) in user space.  */
+	"stm	%0!, {r2, r3, r4, r5, r6}"
+	: "=r" (tp_current)
+	: "0" (tp_current)
+	  /*
+	   * Memory clobber constraint here is not accurate, but this
+	   * works.  R7 keeps its value, but having "r7" here prevents
+	   * use of R7 before this asm statement.
+	   */
+	: "cc", "r2", "r3", "r4", "r5", "r6", "r7", "memory");
+
+      tp_next = chx_running_preempted (tp_next);
+    }
+
+  /* Registers on stack (PSP): r0, r1, r2, r3, r12, lr, pc, xpsr */
+
+  asm volatile (
+	/* Now, r0 points to the thread to be switched.  */
+	/* Put it to *running.  */
+	"ldr	r1, =running\n\t"
+	/* Update running: chx_set_running */
+	"str	r0, [r1]\n\t"
+	/**/
+	"adds	r0, #20\n\t"
+	"ldm	r0!, {r4, r5, r6, r7}\n\t"
+#if defined(__ARM_ARCH_6M__)
+	"ldm	r0!, {r1, r2, r3}\n\t"
+	"mov	r8, r1\n\t"
+	"mov	r9, r2\n\t"
+	"mov	r10, r3\n\t"
+	"ldm	r0!, {r1, r2}\n\t"
+	"mov	r11, r1\n\t"
+	"msr	PSP, r2\n\t"
+#else
+	"ldr	r8, [r0], #4\n\t"
+	"ldr	r9, [r0], #4\n\t"
+	"ldr	r10, [r0], #4\n\t"
+	"ldr	r11, [r0], #4\n\t"
+	"ldr	r1, [r0], #4\n\t"
+	"msr	PSP, r1\n\t"
+#endif
+	"movs	r0, #0\n\t"
+	"subs	r0, #3\n\t" /* EXC_RETURN to a thread with PSP */
+	"bx	r0"
+	: /* no output */ : "r" (tp_next) : "memory");
+}
+
+static struct chx_thread *chx_timer_expired (void) __attribute__ ((noinline,used));
+static struct chx_thread *chx_recv_irq (uint32_t irq_num) __attribute__ ((noinline,used));
+
+void __attribute__ ((naked))
 chx_handle_intr (void)
 {
-  struct chx_pq *p;
-  register uint32_t irq_num;
+  register struct chx_thread *tp_next asm ("r0");;

  asm volatile ("mrs	%0, IPSR\n\t"
-		"sub	%0, #16"   /* Exception # - 16 = interrupt number.  */
-		: "=r" (irq_num) : /* no input */ : "memory");
+		/* Exception # - 16 = interrupt number.  */
+		"subs	%0, #16\n\t"
+		"bpl	0f\n\t"
+		"bl	chx_timer_expired\n\t"
+		"b	1f\n"
+	      "0:\n\t"
+		"bl	chx_recv_irq\n"
+	      "1:"
+		: "=r" (tp_next) : /* no input */ : "cc", "memory");

-  chx_disable_intr (irq_num);
-  chx_spin_lock (&q_intr.lock);
-  for (p = q_intr.q.next; p != (struct chx_pq *)&q_intr.q; p = p->next)
-    if (p->v == irq_num)
-      {			/* should be one at most. */
-	struct chx_px *px = (struct chx_px *)p;
-
-	ll_dequeue (p);
-	chx_wakeup (p);
-	chx_request_preemption (px->master->prio);
-	break;
-      }
-  chx_spin_unlock (&q_intr.lock);
+  if (tp_next)
+    asm volatile (
+	"b	involuntary_context_switch"
+	: /*no input */ : /* no input */ : "memory");
+  else
+    asm volatile (
+	"movs	r0, #0\n\t"
+	"subs	r0, #3\n\t" /* EXC_RETURN to a thread with PSP */
+	"bx	r0"
+	: /*no input */ : /* no input */ : "memory");
 }

 static void
@@ -296,51 +363,26 @@ chx_init_arch (struct chx_thread *tp)
  chx_set_running (tp);
 }

-static void
-chx_request_preemption (uint16_t prio)
-{
-  if (running == NULL || (uint16_t)running->prio < prio)
-    {
-      *ICSR = (1 << 28);
-      asm volatile ("" : : : "memory");
-    }
-}

-
-/*
- * chx_sched: switch to another thread.
- *
- * There are two cases:
- *   YIELD=0 (SLEEP): Current RUNNING thread is already connected to
- *                    something (mutex, cond, intr, etc.)
- *   YIELD=1 (YIELD): Current RUNNING thread is active,
- *                    it is needed to be enqueued to READY queue.
- *
- * For Cortex-M0, this should be AAPCS-compliant function entry, so we
- * put "noinline" attribute.
- *
- * 	AAPCS: ARM Architecture Procedure Call Standard
- *
- * Returns:
- *       >= 1 on wakeup by others, value means ticks remained for sleep.
- *          0 on normal wakeup (timer expiration, lock acquirement).
- *         -1 on cancellation.
- */
-static uintptr_t __attribute__ ((naked, noinline))
-chx_sched (uint32_t yield)
+static uintptr_t
+voluntary_context_switch (struct chx_thread *tp_next)
 {
-  register struct chx_thread *tp asm ("r0");
+  register uintptr_t result asm ("r0");

 #if defined(__ARM_ARCH_7M__) || defined(__ARM_ARCH_7EM__)
  asm volatile (
-	"svc	#0"
-	: "=r" (tp) : "0" (yield): "memory");
+	"svc	#0\n\t"
+	"add	r1, r0, #16\n\t"
+	"ldr	r0, [r1]"	/* Get tp->v */
+	: "=r" (result) : "0" (tp_next): "r1", "memory");
 #else
-  register uint32_t arg_yield asm ("r1");
+  register struct chx_thread *tp asm ("r1");

-  /* Build stack data as if it were an exception entry.  */
+  /* Build stack data as if it were an exception entry.
+   * And set the stack top to have RUNNNING.
+   */
  /*
-   * r0:  TP                    scratch
+   * r0:  RUNNING               scratch
   * r1:  0                     scratch
   * r2:  0                     scratch
   * r3:  0                     scratch
@@ -349,45 +391,35 @@ chx_sched (uint32_t yield)
   * pc:  return address (= .L_CONTEXT_SWITCH_FINISH)
   * psr: INITIAL_XPSR          scratch
   */
-  asm ("mov	r1, lr\n\t"
+  asm ("mov	%0, lr\n\t"
       "ldr	r2, =.L_CONTEXT_SWITCH_FINISH\n\t"
-       "mov	r3, #128\n\t"
-       "lsl	r3, #17\n\t"
-       "push	{r1, r2, r3}\n\t"
-       "mov	r1, #0\n\t"
-       "mov	r2, r1\n\t"
-       "mov	r3, r1\n\t"
-       "push	{r1, r2, r3}\n\t"
-       "mov	r1, r0\n\t"
+       "movs	r3, #128\n\t"
+       "lsls	r3, #17\n\t"
+       "push	{%0, r2, r3}\n\t"
+       "movs	%0, #0\n\t"
+       "mov	r2, %0\n\t"
+       "mov	r3, %0\n\t"
+       "push	{%0, r2, r3}\n\t"
       "ldr	r2, =running\n\t"
-       "ldr	r0, [r2]\n\t"
-       "push	{r0, r3}"
-       :  "=r" (tp), "=r" (arg_yield)
-       : "0" (yield)
-       : "r2", "r3", "memory");
+       "ldr	%0, [r2]\n\t"
+       "push	{%0, r3}\n\t"
+       : "=r" (tp)
+       : /* no input */
+       : "cc", "r2", "r3", "memory");

  /* Save registers onto CHX_THREAD struct.  */
-  asm ("add	r0, #20\n\t"
-       "stm	r0!, {r4, r5, r6, r7}\n\t"
+  asm ("adds	r1, #20\n\t"
+       "stm	r1!, {r4, r5, r6, r7}\n\t"
       "mov	r2, r8\n\t"
       "mov	r3, r9\n\t"
       "mov	r4, r10\n\t"
       "mov	r5, r11\n\t"
       "mov	r6, sp\n\t"
-       "stm	r0!, {r2, r3, r4, r5, r6}\n\t"
-       "sub	r0, #56"
+       "stm	r1!, {r2, r3, r4, r5, r6}\n\t"
+       "subs	r1, #56"
       : /* no output */
       : "r" (tp)
-       : "r2", "r3", "r4", "r5", "r6", "r7", "memory");
-
-  if (arg_yield)
-    {
-      if (tp->flag_sched_rr)
-	chx_timer_dequeue (tp);
-      chx_ready_enqueue (tp);
-    }
-
-  tp = chx_ready_pop ();
+       : "cc", "r2", "r3", "r4", "r5", "r6", "r7", "memory");

  asm volatile (/* Now, r0 points to the thread to be switched.  */
 		/* Put it to *running.  */
@@ -408,7 +440,7 @@ chx_sched (uint32_t yield)

 		/* Normal context switch */
 	"0:\n\t"
-		"add	r0, #20\n\t"
+		"adds	r0, #20\n\t"
 		"ldm	r0!, {r4, r5, r6, r7}\n\t"
 		"ldm	r0!, {r1, r2, r3}\n\t"
 		"mov	r8, r1\n\t"
@@ -417,15 +449,9 @@ chx_sched (uint32_t yield)
 		"ldm	r0!, {r1, r2}\n\t"
 		"mov	r11, r1\n\t"
 		"mov	sp, r2\n\t"
-		"sub	r0, #45\n\t"
-		"ldrb	r1, [r0]\n\t" /* ->PRIO field.  */
-		"cmp	r1, #247\n\t"
-		"bhi	1f\n\t"	/* Leave interrupt disabled if >= 248 */
 		/**/
 		/* Unmask interrupts.  */
-		"cpsie	i\n"
-		/**/
-	"1:\n\t"
+		"cpsie	i\n\t"
 		/*
 		  0:  r0
 		  4:  r1
@@ -439,12 +465,12 @@ chx_sched (uint32_t yield)
 		  [28 or 32] <-- pc
 		*/
 		"ldr	r0, [sp, #28]\n\t"
-		"lsl	r1, r0, #23\n\t"
+		"lsls	r1, r0, #23\n\t"
 		"bcc	2f\n\t"
 		/**/
 		"ldr	r2, [sp, #24]\n\t"
-		"mov	r1, #1\n\t"
-		"orr	r2, r1\n\t"	/* Ensure Thumb-mode */
+		"movs	r1, #1\n\t"
+		"orrs	r2, r1\n\t"	/* Ensure Thumb-mode */
 		"str	r2, [sp, #32]\n\t"
 		"msr	APSR_nzcvq, r0\n\t"
 		/**/
@@ -457,8 +483,8 @@ chx_sched (uint32_t yield)
 		"pop	{pc}\n"
 	"2:\n\t"
 		"ldr	r2, [sp, #24]\n\t"
-		"mov	r1, #1\n\t"
-		"orr	r2, r1\n\t"	/* Ensure Thumb-mode */
+		"movs	r1, #1\n\t"
+		"orrs	r2, r1\n\t"	/* Ensure Thumb-mode */
 		"str	r2, [sp, #28]\n\t"
 		"msr	APSR_nzcvq, r0\n\t"
 		/**/
@@ -469,17 +495,14 @@ chx_sched (uint32_t yield)
 		"pop	{r0, r1, r2, r3}\n\t"
 		"add	sp, #12\n\t"
 		"pop	{pc}\n\t"
-	".L_CONTEXT_SWITCH_FINISH:"
-		: "=r" (tp)		/* Return value in R0 */
-		: "0" (tp)
-		: "memory");
+	".L_CONTEXT_SWITCH_FINISH:\n\t"
+		"adds	r0, #16\n\t"
+		"ldr	r0, [r0]"       /* Get tp->v */
+		: "=r" (result)		/* Return value in R0 */
+		: "0" (tp_next)
+		: "cc", "memory");
 #endif
-
-  asm volatile ("bx	lr"
-		: "=r" (tp)
-		: "0" (tp->v)
-		: "memory");
-  return (uintptr_t)tp;
+  return result;
 }

 extern void cause_link_time_error_unexpected_size_of_struct_chx_thread (void);
@@ -514,170 +537,19 @@ chopstx_create_arch (uintptr_t stack_addr, size_t stack_size,
  return tp;
 }

-/*
- * Lower layer architecture specific exception handling entries.
- *
- */
-
-void __attribute__ ((naked))
-preempt (void)
-{
-  register struct chx_thread *tp asm ("r0");
-  register struct chx_thread *cur asm ("r1");
-
-  asm volatile (
-#if defined(__ARM_ARCH_6M__)
-	"cpsid	i\n\t"
-#else
-	"msr	BASEPRI, r0\n\t"
-#endif
-	"ldr	r2, =running\n\t"
-	"ldr	r0, [r2]\n\t"
-	"mov	r1, r0"
-	: "=r" (tp), "=r" (cur)
-	: "0" (CPU_EXCEPTION_PRIORITY_INHIBIT_SCHED)
-	: "r2");
-
-  if (!cur)
-    /* It's idle thread.  It's ok to clobber registers.  */
-    ;
-  else
-    {
-      /* Save registers onto CHX_THREAD struct.  */
-      asm volatile (
-	"add	%0, #20\n\t"
-	"stm	%0!, {r4, r5, r6, r7}\n\t"
-	"mov	r2, r8\n\t"
-	"mov	r3, r9\n\t"
-	"mov	r4, r10\n\t"
-	"mov	r5, r11\n\t"
-	"mrs	r6, PSP\n\t" /* r13(=SP) in user space.  */
-	"stm	%0!, {r2, r3, r4, r5, r6}"
-	: "=r" (cur)
-	: "0" (cur)
-          /*
-	   * Memory clobber constraint here is not accurate, but this
-	   * works.  R7 keeps its value, but having "r7" here prevents
-	   * use of R7 before this asm statement.
-	   */
-	: "r2", "r3", "r4", "r5", "r6", "r7", "memory");
-
-      if (tp)
-	{
-	  if (tp->flag_sched_rr)
-	    {
-	      if (tp->state == THREAD_RUNNING)
-		{
-		  chx_timer_dequeue (tp);
-		  chx_ready_enqueue (tp);
-		}
-	      /*
-	       * It may be THREAD_READY after chx_timer_expired.
-	       * Then, do nothing.
-	       */
-	    }
-	  else
-	    chx_ready_push (tp);
-	}
-    }
-
-  /* Registers on stack (PSP): r0, r1, r2, r3, r12, lr, pc, xpsr */
-
-  tp = chx_ready_pop ();
-
-  asm volatile (
-    ".L_CONTEXT_SWITCH:\n\t"
-	/* Now, r0 points to the thread to be switched.  */
-	/* Put it to *running.  */
-	"ldr	r1, =running\n\t"
-	/* Update running.  */
-	"str	r0, [r1]\n\t"
-#if defined(__ARM_ARCH_6M__)
-	"cmp	r0, #0\n\t"
-	"beq	1f\n\t"
-#else
-	"cbz	r0, 1f\n\t"
-#endif
-	/**/
-	"add	r0, #20\n\t"
-	"ldm	r0!, {r4, r5, r6, r7}\n\t"
-#if defined(__ARM_ARCH_6M__)
-	"ldm	r0!, {r1, r2, r3}\n\t"
-	"mov	r8, r1\n\t"
-	"mov	r9, r2\n\t"
-	"mov	r10, r3\n\t"
-	"ldm	r0!, {r1, r2}\n\t"
-	"mov	r11, r1\n\t"
-	"msr	PSP, r2\n\t"
-#else
-	"ldr	r8, [r0], #4\n\t"
-	"ldr	r9, [r0], #4\n\t"
-	"ldr	r10, [r0], #4\n\t"
-	"ldr	r11, [r0], #4\n\t"
-	"ldr	r1, [r0], #4\n\t"
-	"msr	PSP, r1\n\t"
-#endif
-	"sub	r0, #45\n\t"
-	"ldrb	r1, [r0]\n\t" /* ->PRIO field.  */
-	"mov	r0, #0\n\t"
-	"cmp	r1, #247\n\t"
-	"bhi	0f\n\t"	/* Leave interrupt disabled if >= 248 */
-	/**/
-	/* Unmask interrupts.  */
-#if defined(__ARM_ARCH_6M__)
-	"cpsie	i\n"
-#else
-	"msr	BASEPRI, r0\n"
-#endif
-	/**/
-    "0:\n\t"
-	"sub	r0, #3\n\t" /* EXC_RETURN to a thread with PSP */
-	"bx	r0\n"
-    "1:\n\t"
-	/* Spawn an IDLE thread.  */
-	"ldr	r0, =__main_stack_end__-32\n\t"
-	"msr	PSP, r0\n\t"
-	"mov	r1, #0\n\t"
-	"mov	r2, #0\n\t"
-	"mov	r3, #0\n\t"
-	"stm	r0!, {r1, r2, r3}\n\t"
-	"stm	r0!, {r1, r2, r3}\n\t"
-	"ldr	r1, =chx_idle\n\t" /* PC = idle */
-	"mov	r2, #0x010\n\t"
-	"lsl	r2, r2, #20\n\t" /* xPSR = T-flag set (Thumb) */
-	"stm	r0!, {r1, r2}\n\t"
-	/**/
-	/* Unmask interrupts.  */
-	"mov	r0, #0\n\t"
-#if defined(__ARM_ARCH_6M__)
-	"cpsie	i\n\t"
-#else
-	"msr	BASEPRI, r0\n"
-#endif
-	/**/
-	"sub	r0, #3\n\t" /* EXC_RETURN to a thread with PSP */
-	"bx	r0"
-	: /* no output */ : "r" (tp) : "memory");
-}

 #if defined(__ARM_ARCH_7M__) || defined(__ARM_ARCH_7EM__)
 /*
 * System call: switch to another thread.
- * There are two cases:
- *   ORIG_R0=0 (SLEEP): Current RUNNING thread is already connected to
- *                      something (mutex, cond, intr, etc.)
- *   ORIG_R0=1 (YIELD): Current RUNNING thread is active,
- *                      it is needed to be enqueued to READY queue.
 */
 void __attribute__ ((naked))
 svc (void)
 {
-  register struct chx_thread *tp asm ("r0");
-  register uint32_t orig_r0 asm ("r1");
+  register uint32_t tp_next asm ("r0");

  asm ("ldr	r1, =running\n\t"
-       "ldr	r0, [r1]\n\t"
-       "add	r1, r0, #20\n\t"
+       "ldr	r1, [r1]\n\t"
+       "adds	r1, #20\n\t"
       /* Save registers onto CHX_THREAD struct.  */
       "stm	r1!, {r4, r5, r6, r7}\n\t"
       "mov	r2, r8\n\t"
@@ -686,23 +558,52 @@ svc (void)
       "mov	r5, r11\n\t"
       "mrs	r6, PSP\n\t" /* r13(=SP) in user space.  */
       "stm	r1!, {r2, r3, r4, r5, r6}\n\t"
-       "ldr	r1, [r6]\n\t"
-       "str	r0, [r6]"
-       : "=r" (tp), "=r" (orig_r0)
+       "ldr	r0, [r6]\n\t"
+       "subs	r1, #56\n\t"
+       "str	r1, [r6]"
+       : "=r" (tp_next)
       : /* no input */
-       : "r2", "r3", "r4", "r5", "r6", "memory");
-
-  if (orig_r0)			/* yield */
-    {
-      if (tp->flag_sched_rr)
-	chx_timer_dequeue (tp);
-      chx_ready_enqueue (tp);
-    }
-
-  tp = chx_ready_pop ();
+       : "cc", "r1", "r2", "r3", "r4", "r5", "r6", "memory");

  asm volatile (
-	"b	.L_CONTEXT_SWITCH"
-	: /* no output */ : "r" (tp) : "memory");
+	/* Now, r0 points to the thread to be switched.  */
+	/* Put it to *running.  */
+	"ldr	r1, =running\n\t"
+	/* Update running: chx_set_running */
+	"str	r0, [r1]\n\t"
+	"cbz	r0, 1f\n\t"
+	/**/
+	"adds	r0, #20\n\t"
+	"ldm	r0!, {r4, r5, r6, r7}\n\t"
+	"ldr	r8, [r0], #4\n\t"
+	"ldr	r9, [r0], #4\n\t"
+	"ldr	r10, [r0], #4\n\t"
+	"ldr	r11, [r0], #4\n\t"
+	"ldr	r1, [r0], #4\n\t"
+	"msr	PSP, r1\n\t"
+	/* Unmask interrupts.  */
+	"movs	r0, #0\n\t"
+	"msr	BASEPRI, r0\n\t"
+	"subs	r0, #3\n\t" /* EXC_RETURN to a thread with PSP */
+	"bx	r0\n"
+    "1:\n\t"
+	/* Spawn an IDLE thread.  */
+	"ldr	r0, =__main_stack_end__-32\n\t"
+	"msr	PSP, r0\n\t"
+	"movs	r1, #0\n\t"
+	"movs	r2, #0\n\t"
+	"movs	r3, #0\n\t"
+	"stm	r0!, {r1, r2, r3}\n\t"
+	"stm	r0!, {r1, r2, r3}\n\t"
+	"ldr	r1, =chx_idle\n\t" /* PC = idle */
+	"movs	r2, #0x010\n\t"
+	"lsls	r2, r2, #20\n\t" /* xPSR = T-flag set (Thumb) */
+	"stm	r0!, {r1, r2}\n\t"
+	/* Unmask interrupts.  */
+	"movs	r0, #0\n\t"
+	"msr	BASEPRI, r0\n"
+	"subs	r0, #3\n\t" /* EXC_RETURN to a thread with PSP */
+	"bx	r0"
+	: /* no output */ : "r" (tp_next) : "memory");
 }
 #endif
--- a/chopstx-gnu-linux.c
+++ b/chopstx-gnu-linux.c
@@ -2,7 +2,7 @@
 * chopstx-gnu-linux.c - Threads and only threads: Arch specific code
 *                       for GNU/Linux emulation
 *
- * Copyright (C) 2017, 2018, 2019 Flying Stone Technology
+ * Copyright (C) 2017, 2018, 2019, 2021 Flying Stone Technology
 * Author: NIIBE Yutaka <gniibe@fsij.org>
 *
 * This file is a part of Chopstx, a thread library for embedded.
@@ -27,6 +27,16 @@
 *
 */

+/*
+ * NOTE: This code is not portable.  It's intended for GNU/Linux.
+ *
+ * This implementation depends on the feature of SA_SIGINFO of Linux,
+ * which signal handler takes three arguments.  Also, it depends on
+ * GNU C library for how to use the makecontext function on 64-bit
+ * machine.
+ *
+ */
+
 #include <unistd.h>
 #include <ucontext.h>
 #include <signal.h>
@@ -54,6 +64,8 @@ chx_dmb (void)
 }


+static void preempted_context_switch (struct chx_thread *tp_next);
+
 static sigset_t ss_cur;

 static void
@@ -144,38 +156,50 @@ chx_cpu_sched_unlock (void)
  pthread_sigmask (SIG_SETMASK, &ss_cur, NULL);
 }

-static void
-idle (void)
+/* NOTE: Called holding the cpu_sched_lock.  */
+static struct chx_thread *
+chx_idle (void)
 {
-  for (;;)
-    pause ();
+  struct chx_thread *tp_next = NULL;
+
+  while (tp_next == NULL)
+    {
+      int sig;
+      sigset_t set;
+
+      sigfillset (&set);
+      if (sigwait (&set, &sig))
+	continue;
+
+      if (sig == SIGALRM)
+	tp_next = chx_timer_expired ();
+      else
+	{
+	  tp_next = chx_recv_irq (sig);
+	  /* Exit when there is no waiter and it's INT or TERM.	 */
+	  if (tp_next == NULL
+	      && (sig == SIGINT || sig == SIGTERM))
+	    exit (1);
+	}
+    }
+
+  return tp_next;
 }

 void
 chx_handle_intr (uint32_t irq_num)
 {
-  struct chx_pq *p;
+  struct chx_thread *tp_next;

-  chx_disable_intr (irq_num);
-  chx_spin_lock (&q_intr.lock);
-  for (p = q_intr.q.next; p != (struct chx_pq *)&q_intr.q; p = p->next)
-    if (p->v == irq_num)
-      {			/* should be one at most. */
-	struct chx_px *px = (struct chx_px *)p;
+  tp_next = chx_recv_irq (irq_num);
+  if (!tp_next)
+    return;

-	ll_dequeue (p);
-	chx_wakeup (p);
-	chx_spin_unlock (&q_intr.lock);
-	chx_request_preemption (px->master->prio);
-	return;
-      }
-  chx_spin_unlock (&q_intr.lock);
+  tp_next = chx_running_preempted (tp_next);
+  preempted_context_switch (tp_next);
 }


-static ucontext_t idle_tc;
-static char idle_stack[4096];
-
 struct chx_thread main_thread;

 void
@@ -193,11 +217,17 @@ chx_sigmask (ucontext_t *uc)
 static void
 sigalrm_handler (int sig, siginfo_t *siginfo, void *arg)
 {
-  extern void chx_timer_expired (void);
+  struct chx_thread *tp_next;
  ucontext_t *uc = arg;
  (void)sig;
  (void)siginfo;
-  chx_timer_expired ();
+
+  tp_next = chx_timer_expired ();
+  if (tp_next)
+    {
+      tp_next = chx_running_preempted (tp_next);
+      preempted_context_switch (tp_next);
+    }
  chx_sigmask (uc);
 }

@@ -213,112 +243,56 @@ chx_init_arch (struct chx_thread *tp)
  sa.sa_flags = SA_SIGINFO|SA_RESTART;
  sigaction (SIGALRM, &sa, NULL); 

-  getcontext (&idle_tc);
-  idle_tc.uc_stack.ss_sp = idle_stack;
-  idle_tc.uc_stack.ss_size = sizeof (idle_stack);
-  idle_tc.uc_link = NULL;
-  makecontext (&idle_tc, idle, 0);
-
  getcontext (&tp->tc);
-
  chx_set_running (tp);
 }

 static void
-chx_request_preemption (uint16_t prio)
+preempted_context_switch (struct chx_thread *tp_next)
 {
-  ucontext_t *tcp;
-  struct chx_thread *tp_prev;
-  struct chx_thread *tp = chx_running ();
+  struct chx_thread *tp_prev = chx_running ();

-  if (tp && (uint16_t)tp->prio >= prio)
-    return;
-
-  /* Change the context to another thread with higher priority.  */
-  tp_prev = tp;
-  if (tp)
-    {
-      if (tp->flag_sched_rr)
-	{
-	  if (tp->state == THREAD_RUNNING)
-	    {
-	      chx_timer_dequeue (tp);
-	      chx_ready_enqueue (tp);
-	    }
-	}
-      else
-	chx_ready_push (tp);
-    }
-
-  tp = chx_ready_pop ();
-  if (tp)
-    tcp = &tp->tc;
-  else
-    tcp = &idle_tc;
-
-  chx_set_running (tp);
-  if (tp_prev)
-    {
-      /*
-       * The swapcontext implementation may reset sigmask in the
-       * middle of its execution, unfortunately.  It is best if
-       * sigmask restore is done at the end of the routine, but we
-       * can't assume that.
-       *
-       * Thus, there might be a race condition with regards to the
-       * user context TCP, if signal mask is cleared and signal comes
-       * in.  To avoid this situation, we block signals.
-       *
-       * We don't need to fill the mask here.  It keeps the condition
-       * of blocking signals before&after swapcontext call.  It is
-       * done by the signal mask for sigaction, the initial creation
-       * of the thread, and the condition of chx_sched function which
-       * mandates holding cpu_sched_lock.
-       */
-      swapcontext (&tp_prev->tc, tcp);
-    }
-  else if (tp)
-    {
-      setcontext (tcp);
-    }
+  /*
+   * The swapcontext implementation may reset sigmask in the
+   * middle of its execution, unfortunately.  It is best if
+   * sigmask restore is done at the end of the routine, but we
+   * can't assume that.
+   *
+   * Thus, there might be a race condition with regards to the
+   * user context TCP, if signal mask is cleared and signal comes
+   * in.  To avoid this situation, we block signals.
+   *
+   * We don't need to fill the mask here.  It keeps the condition
+   * of blocking signals before&after swapcontext call.  It is
+   * done by the signal mask for sigaction, the initial creation
+   * of the thread, and the condition of chx_sched function which
+   * mandates holding cpu_sched_lock.
+   */
+  chx_set_running (tp_next);
+  swapcontext (&tp_prev->tc, &tp_next->tc);
 }

-/*
- * chx_sched: switch to another thread.
- *
- * There are two cases:
- *   YIELD=0 (SLEEP): Current RUNNING thread is already connected to
- *                    something (mutex, cond, intr, etc.)
- *   YIELD=1 (YIELD): Current RUNNING thread is active,
- *                    it is needed to be enqueued to READY queue.
- *
- * Returns:
- *          1 on wakeup by others.
- *          0 on normal wakeup.
- *         -1 on cancellation.
- */
+
 static uintptr_t
-chx_sched (uint32_t yield)
+voluntary_context_switch (struct chx_thread *tp_next)
 {
-  struct chx_thread *tp, *tp_prev;
-  ucontext_t *tcp;
+  struct chx_thread *tp;
+  struct chx_thread *tp_prev;

-  tp = tp_prev = chx_running ();
-  if (yield)
+  tp_prev = chx_running ();
+  if (!tp_next)
    {
-      if (tp->flag_sched_rr)
-	chx_timer_dequeue (tp);
-      chx_ready_enqueue (tp);
+      chx_set_running (NULL);
+      tp_next = chx_idle ();
+      chx_set_running (tp_next);
+      if (tp_prev != tp_next)
+	swapcontext (&tp_prev->tc, &tp_next->tc);
    }
-
-  tp = chx_ready_pop ();
-  if (tp)
-    tcp = &tp->tc;
  else
-    tcp = &idle_tc;
-
-  chx_set_running (tp);
-  swapcontext (&tp_prev->tc, tcp);
+    {
+      chx_set_running (tp_next);
+      swapcontext (&tp_prev->tc, &tp_next->tc);
+    }
  chx_cpu_sched_unlock ();

  tp = chx_running ();
@@ -328,9 +302,11 @@ chx_sched (uint32_t yield)
 static void __attribute__((__noreturn__))
 chx_thread_start (voidfunc thread_entry, void *arg)
 {
+  void *ret;
+
  chx_cpu_sched_unlock ();
-  thread_entry (arg);
-  chopstx_exit (0);
+  ret = thread_entry (arg);
+  chopstx_exit (ret);
 }

 static struct chx_thread *
@@ -347,13 +323,22 @@ chopstx_create_arch (uintptr_t stack_addr, size_t stack_size,
   * signal blocked.  The sigmask will be cleared in chx_thread_start.
   */
  chx_cpu_sched_lock ();
+  memset (tp, 0, sizeof (struct chx_thread));
  getcontext (&tp->tc);
  tp->tc.uc_stack.ss_sp = (void *)stack_addr;
  tp->tc.uc_stack.ss_size = stack_size;
  tp->tc.uc_link = NULL;

+  /*
+   * makecontext is hard to use in a portable way, actually.
+   *
+   * On 64-bit machine, according to the standard, it should be coded
+   * to specify int (== 32-bit for LP64 machine) arguments that follow
+   * ARGC, so it is not that correct to specify two 64-bit arguments
+   * here.  However, GNU C library allows this.
+   */
  makecontext (&tp->tc, (void (*)(void))chx_thread_start,
-	       4, thread_entry, arg);
+	       2, thread_entry, arg);
  chx_cpu_sched_unlock ();
  return tp;
 }
--- a/chopstx-riscv32.c
+++ b/chopstx-riscv32.c
@@ -0,0 +1,684 @@
+/*
+ * chopstx-riscv32.c - Threads and only threads: Arch specific code
+ *                     for RISC-V 32 IMAC (Bumblebee core)
+ *
+ * Copyright (C) 2019, 2021
+ *               Flying Stone Technology
+ * Author: NIIBE Yutaka <gniibe@fsij.org>
+ *
+ * This file is a part of Chopstx, a thread library for embedded.
+ *
+ * Chopstx is free software: you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 3 of the License, or
+ * (at your option) any later version.
+ *
+ * Chopstx is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
+ * General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ *
+ * As additional permission under GNU GPL version 3 section 7, you may
+ * distribute non-source form of the Program without the copy of the
+ * GNU GPL normally required by section 4, provided you inform the
+ * recipients of GNU GPL by a written offer.
+ *
+ */
+
+/*
+ * Define Bumblebee specific CSRs
+ */
+asm (
+	".equ	msubm,0x7c4\n\t" /* No use (not needed to care about) */
+	".equ	mtvt,0x307\n\t"
+	".equ	mtvt2,0x7ec\n\t"
+);
+
+/* Data Memory Barrier.  */
+static void
+chx_dmb (void)
+{
+  asm volatile ("fence" : : : "memory");
+}
+
+/* No saved registers on the stack.  */
+
+/*
+ * Constants for RISC-V.
+ */
+#define REG_PC    0
+#define REG_RA    1
+#define REG_SP    2
+#define REG_GP    3
+#define REG_TP    4
+#define REG_A0   10
+#define MACHINE_STATUS_INIT 0x00001880 /* Machine-mode, interrupt enabled.  */
+
+/*
+ * We keep the TP register to the thread context address.
+ * Also, it is kept at the MSCRATCH register.
+ */
+static struct chx_thread *
+chx_running (void)
+{
+  uint32_t r;
+
+  asm ( "mv	%0,tp"       : "=r" (r));
+  if (r == 0)
+    return NULL;
+  return (struct chx_thread *)(r - 20);
+}
+
+static void
+chx_set_running (struct chx_thread *tp)
+{
+  asm (	"addi	tp,%0,20\n\t"
+	"csrw	mscratch,tp" : /* no output */ : "r" (tp) : "memory");
+}
+
+
+/*
+ * Lower layer architecture specific functions.
+ *
+ * system tick and interrupt
+ */
+
+/*
+ * System tick
+ *
+ * SYSTICK timer model is decreasing counter, where counter value 0
+ * means the timer stop.
+ *
+ * Since RISC-V MTIME is ever increasing counter, we need a bit of
+ * glue code here.  Fortunately, we have MSTOP register for Bumblebee
+ * core, so, we can use the register to stop the counter.  (If no such
+ * register stopping MTIME, we could put possible largest value in
+ * MTIMECMP, so that the timer won't be fired.)
+ */
+/* TIMER registers.  */
+struct TIMER {
+  volatile uint32_t mtime_lo;
+  volatile uint32_t mtime_hi;
+  volatile uint32_t mtimecmp_lo;
+  volatile uint32_t mtimecmp_hi;
+  uint32_t rsv0[1018];
+  volatile uint8_t mstop;
+  uint8_t rsv1[3];
+  volatile uint8_t msip;
+  uint8_t rsv2[3];
+} __attribute__ ((packed));
+static struct TIMER *const TIMER = (struct TIMER *)0xD1000000;
+
+/* In Chopstx, we only use the lower 32-bit of the timer.  */
+
+static void
+chx_systick_init_arch (void)
+{
+  TIMER->mstop |= 1;
+  TIMER->mtime_hi = TIMER->mtime_lo = 0;
+  TIMER->mtimecmp_lo = 0xffffffff;
+  TIMER->mtimecmp_hi = 0;
+}
+
+/*
+ * @ticks: 0 means to stop the timer, otherwise update the timer
+ */
+static void
+chx_systick_reload (uint32_t ticks)
+{
+  if (!ticks)
+    {
+      TIMER->mstop |= 1;
+      TIMER->mtimecmp_lo = 0xffffffff;
+    }
+  else
+    {
+      TIMER->mtime_lo = 0;
+      TIMER->mtimecmp_lo = ticks;
+      if ((TIMER->mstop & 1))
+	TIMER->mstop &= ~1;
+    }
+}
+
+static uint32_t
+chx_systick_get (void)
+{
+  int stopped = (TIMER->mstop & 1);
+
+  if (stopped)
+    return 0;
+  else
+    {
+      uint32_t now = TIMER->mtime_lo;
+
+      if (TIMER->mtimecmp_lo <= now)
+	return 0;
+
+      return TIMER->mtimecmp_lo - now;
+    }
+}
+
+/* TIMER runs at 1/4 of core clock.  */
+
+static uint32_t
+usec_to_ticks (uint32_t usec)
+{
+  return usec * (MHZ/4);
+}
+
+static uint32_t
+ticks_to_usec (uint32_t ticks)
+{
+  return ticks / (MHZ/4);
+}
+
+/*
+ * Interrupt Handling of (E)CLIC
+ */
+
+/* CLIC registers.  */
+struct CLIC {
+  volatile uint8_t cfg;
+  uint8_t rsv[3];
+  volatile uint32_t info;
+  volatile uint8_t uth;
+  volatile uint8_t sth;
+  volatile uint8_t hth;
+  volatile uint8_t mth;
+} __attribute__ ((packed));
+
+static struct CLIC *const CLIC = (struct CLIC *)0xD2000000;
+
+struct CLIC_INT {
+  volatile uint8_t ip;
+  volatile uint8_t ie;
+  volatile uint8_t attr;
+  volatile uint8_t ctl;
+} __attribute__ ((packed));
+static struct CLIC_INT *const CLIC_INT = (struct CLIC_INT *)0xD2001000;
+
+static void
+chx_enable_intr (uint8_t irq_num)
+{
+  CLIC_INT[irq_num].ie |= 1;
+}
+
+static void
+chx_clr_intr (uint8_t irq_num)
+{
+  /* Clear pending interrupt is done automatically by the hardware.  */
+  (void)irq_num;
+}
+
+static int
+chx_disable_intr (uint8_t irq_num)
+{
+  int already_disabled = !(CLIC_INT[irq_num].ie & 1);
+
+  CLIC_INT[irq_num].ie &= ~1;
+  return already_disabled;
+}
+
+static void
+chx_set_intr_prio (uint8_t irq_num)
+{
+  CLIC_INT[irq_num].attr = 0xc0; /* Level triggered, SHV=0 */
+  /* Note: SHV: Selective Hardware Vectoring: off (use common routine).  */
+
+  CLIC_INT[irq_num].ctl = 0xff;
+}
+
+#define SWINT_IRQ   3
+#define TIMER_IRQ   7
+#define MEMERR_IRQ 17           /* Why on earth it's IRQ??? */
+
+static void chx_handle_intr (void);
+static void exception_handler (void);
+
+/* Alignment to 64 is needed to enable ECLIC mode.  */
+static void __attribute__ ((naked,aligned(64)))
+exception_handler (void)
+{
+  asm volatile (
+"0:	j	0b"
+	: /* no output */);
+}
+
+static void __attribute__ ((naked))
+memory_error (void)
+{
+  asm volatile (
+"0:	j	0b"
+	: /* no output */);
+}
+
+typedef void (*handler)(void);
+
+/* Not used (because we always disable SHV for all interrupts),
+ * Just in case, if some interrupt uses SHV=1.
+ */
+static const handler vector_table[] __attribute__ ((aligned(512))) = {
+ 0, 0, 0, chx_handle_intr,
+ 0, 0, 0, chx_handle_intr,
+ 0, 0, 0, 0,
+ 0, 0, 0, 0,
+ 0, memory_error, 0, 0,
+};
+
+static void
+chx_interrupt_controller_init (void)
+{
+  asm volatile (
+	"csrw	mtvt,%0"
+	: /* no output */ : "r" (vector_table) : "memory" );
+
+  asm volatile (
+	"csrw	mtvt2,%0\n\t"
+	"csrsi	mtvt2,1"
+	: /* no output */ : "r" (chx_handle_intr) : "memory");
+
+  asm volatile (
+	"csrw	mtvec,%0\n\t"
+	"csrsi	mtvec,3"        /* Enable ECLC mode */
+	: /* no output */ : "r" (exception_handler) : "memory" );
+
+  CLIC->cfg &= 0xe1;            /* NLBITS = 0 */
+  CLIC->mth = 0;
+
+  /* In Bumblebee core, timer interrupt is also handled by CLIC.  */
+  chx_set_intr_prio (SWINT_IRQ);
+  chx_enable_intr (SWINT_IRQ);
+  chx_set_intr_prio (TIMER_IRQ);
+  chx_enable_intr (TIMER_IRQ);
+  chx_set_intr_prio (MEMERR_IRQ);
+  chx_enable_intr (MEMERR_IRQ);
+}
+
+/* Just for testing TIMER and ECLIC.  No real use for now.  */
+static void
+chx_sw_int (int go)
+{
+  if (go)
+    TIMER->msip |= 1;
+  else
+    TIMER->msip &= ~1;
+}
+
+static void
+chx_cpu_sched_lock (void)
+{
+  asm volatile ("csrci	mstatus,8" : : : "memory" );
+}
+
+static void
+chx_cpu_sched_unlock (void)
+{
+  asm volatile ("csrsi	mstatus,8" : : : "memory" );
+}
+
+static void
+chx_init_arch (struct chx_thread *tp)
+{
+  memset (&tp->tc, 0, sizeof (tp->tc));
+  chx_set_running (tp);
+}
+
+#define SAVE_CALLEE_SAVE_REGISTERS            \
+	"# Save callee save registers\n\t"    \
+	"sw	s0,32(sp)\n\t"                \
+	"sw	s1,36(sp)\n\t"                \
+	"sw	s2,72(sp)\n\t"                \
+	"sw	s3,76(sp)\n\t"                \
+	"sw	s4,80(sp)\n\t"                \
+	"sw	s5,84(sp)\n\t"                \
+	"sw	s6,88(sp)\n\t"                \
+	"sw	s7,92(sp)\n\t"                \
+	"sw	s8,96(sp)\n\t"                \
+	"sw	s9,100(sp)\n\t"               \
+	"sw	s10,104(sp)\n\t"              \
+	"sw	s11,108(sp)\n\t"
+
+#define RESTORE_CALLEE_SAVE_REGISTERS         \
+	"# Restore callee save registers\n\t" \
+	"lw	s0,32(sp)\n\t"                \
+	"lw	s1,36(sp)\n\t"                \
+	"lw	s2,72(sp)\n\t"                \
+	"lw	s3,76(sp)\n\t"                \
+	"lw	s4,80(sp)\n\t"                \
+	"lw	s5,84(sp)\n\t"                \
+	"lw	s6,88(sp)\n\t"                \
+	"lw	s7,92(sp)\n\t"                \
+	"lw	s8,96(sp)\n\t"                \
+	"lw	s9,100(sp)\n\t"               \
+	"lw	s10,104(sp)\n\t"              \
+	"lw	s11,108(sp)\n\t"
+
+#define SAVE_OTHER_REGISTERS            \
+	"# Save other registers\n\t"    \
+	"sw	ra,4(sp)\n\t"           \
+	"sw	gp,12(sp)\n\t"          \
+	"sw	t0,20(sp)\n\t"          \
+	"sw	t1,24(sp)\n\t"          \
+	"sw	t2,28(sp)\n\t"          \
+	"sw	a0,40(sp)\n\t"          \
+	"sw	a1,44(sp)\n\t"          \
+	"sw	a2,48(sp)\n\t"          \
+	"sw	a3,52(sp)\n\t"          \
+	"sw	a4,56(sp)\n\t"          \
+	"sw	a5,60(sp)\n\t"          \
+	"sw	a6,64(sp)\n\t"          \
+	"sw	a7,68(sp)\n\t"          \
+	"sw	t3,112(sp)\n\t"         \
+	"sw	t4,116(sp)\n\t"         \
+	"sw	t5,120(sp)\n\t"         \
+	"sw	t6,124(sp)\n\t"
+
+#define RESTORE_OTHER_REGISTERS         \
+	"# Restore other registers\n\t" \
+	"lw	ra,4(sp)\n\t"           \
+	"lw	gp,12(sp)\n\t"          \
+	"lw	t0,20(sp)\n\t"          \
+	"lw	t1,24(sp)\n\t"          \
+	"lw	t2,28(sp)\n\t"          \
+	"lw	a0,40(sp)\n\t"          \
+	"lw	a1,44(sp)\n\t"          \
+	"lw	a2,48(sp)\n\t"          \
+	"lw	a3,52(sp)\n\t"          \
+	"lw	a4,56(sp)\n\t"          \
+	"lw	a5,60(sp)\n\t"          \
+	"lw	a6,64(sp)\n\t"          \
+	"lw	a7,68(sp)\n\t"          \
+	"lw	t3,112(sp)\n\t"         \
+	"lw	t4,116(sp)\n\t"         \
+	"lw	t5,120(sp)\n\t"         \
+	"lw	t6,124(sp)\n\t"
+/*
+ * MSTATUS register:
+ *   31:    SD
+ *   16-15: XS (Extra Unit state)
+ *   14-13: FS (Floating-point Unit state)
+ *   12-11: MPP  (Previous Privilege)
+ *   7:     MPIE (Previous Interrupt Enable flag)
+ *   3:     MIE  (Interrupt Enable flag)
+ */
+/*
+ * MSUBM register:
+ *   9-8 PTYP (Previous Type-of-execution)
+ *   7-6 TYP  (Currunt Type-of-execution)
+ *   0: Normal, 1: Interrupt, 2: Excep, 3: NMI
+ *
+ * No need to store PTYP field of MSUBM in MACHINE_STATUS.
+ * No need to setup MSUBM for PTYP.
+ * Since it's always 0 when this is called.
+ *
+ * Save MPP..MPIE in MACHINE_STATUS in the thread context.
+ */
+#define SETUP_MSTATUS_FROM_MACHINE_STATUS                                 \
+	"lw	a0,128(sp)\n\t"   /* MPP..MPIE is in MACHINE_STATUS  */   \
+	"csrr	a1,mstatus\n\t"                                           \
+	"srli	a1,a1,13\n\t"                                             \
+	"slli	a1,a1,13\n\t"     /* SD, XS, and FS bits from MSTATUS */  \
+	"or	a0,a0,a1\n\t"                                             \
+	"csrw	mstatus,a0\n\t"   /* Note: keep MIE=0 */
+
+/* It is good if ISA has a single instruction for this operation.  */
+#define CATCH_AN_INTERRUPT_SYNCHRONOUSLY                                     \
+	"mv	a0,zero\n"                                                   \
+    "0:\n\t"                                                                 \
+	/*                                                                   \
+	 * Interrupt is masked here, and it executes the WFI                 \
+	 * instruction.  When an interrupt occurs, the core is waken         \
+	 * up (even if it is masked).                                        \
+	 */                                                                  \
+	"csrci	mstatus,8\n\t"  /* Interrupt should be masked already.   */  \
+				/* Nevertheless, make sure it's masked.  */  \
+	"wfi\n\t"                                                            \
+	/*                                                                   \
+	 * It is good if MCAUSE were updated here, but it is only            \
+	 * updated when the control goes into the interrupt service,         \
+	 * in a step of the interrupt handling steps of the core.  So,       \
+	 * we let it go to chx_handle_intr, by unmasking.                    \
+	 */                                                                  \
+	"csrsi	mstatus,8\n\t"  /* Unmask interrupts to catch one.  */       \
+	/* Just before this line, it is interrupted.  */                     \
+	/* And interrupt is masked and a0 is set.     */                     \
+	"beqz	a0,0b\n\t"      /* Just in case if not, loop.  */
+
+/*
+ * The idle function.
+ *
+ * NOTE: In this function, interrupt is masked (MIE=0) and interrupt
+ * is synchronously handled.
+ */
+static struct chx_thread * __attribute__ ((used))
+chx_idle (void)
+{
+  extern void chx_prepare_sleep_mode (void);
+  register struct chx_thread *tp_next asm ("a0") = NULL;
+
+  while (tp_next == NULL)
+    {
+      register uint32_t irq_num asm ("a0");
+
+      chx_prepare_sleep_mode ();  /* MCU specific sleep setup */
+
+      asm volatile (
+	CATCH_AN_INTERRUPT_SYNCHRONOUSLY
+	/*
+	 * In chx_handle_intr, a0 is set by the value of MCAUSE.
+	 */
+	"slli	a0,a0,20\n\t"
+	"srli	a0,a0,20"       /* Take lower 12-bit of MCAUSE */
+	: "=r" (irq_num));
+      /* Note: here, interrupt is masked again.  */
+
+      if (irq_num == SWINT_IRQ)
+	chx_sw_int (0);
+      else if (irq_num == TIMER_IRQ)
+	tp_next = chx_timer_expired ();
+      else if (irq_num == MEMERR_IRQ)
+	memory_error ();
+      else
+	tp_next = chx_recv_irq (irq_num);
+    }
+
+  return tp_next;
+}
+
+
+static uintptr_t
+voluntary_context_switch (struct chx_thread *tp_next)
+{
+  register uintptr_t result asm ("a0");
+
+  asm volatile (
+	/* Here, %0 (a0) points to pointer (struct chx_thread *) to be
+	 * switched.  We get the thread context pointer adding the
+	 * offset.
+	*/
+	"# Voluntary context switch\n\t"
+	"sw	sp,8(tp)\n\t"
+	"mv	sp,tp\n\t"        /* Using SP, we can use C.SWSP instruction */
+	"sw	zero,0(sp)\n\t"
+	SAVE_CALLEE_SAVE_REGISTERS
+	"# Check if going to IDLE function\n\t"
+	"bnez	%0,0f\n\t"
+	/*
+	 * NOTE: Here, for running chx_idle, we can use
+	 * __main_stack_end__, because neither any threads, nor
+	 * interrupt context use that.	Using __main_stack_end__, we
+	 * can minimize stack memory usage of each thread.
+	 */
+	"# Call the IDLE function, interrupt masked.\n\t"
+	"mv	tp,zero\n\t"
+	"csrw	mscratch,tp\n\t" /* chx_set_running */
+	"la	sp,__main_stack_end__\n\t"
+	"call	chx_idle\n"
+    ".L_V_CONTEXT_SWITCH_BEGIN:\n"
+    "0:\n\t"
+	"addi	%0,%0,20\n\t"
+	"mv	sp,%0\n\t"
+	RESTORE_CALLEE_SAVE_REGISTERS
+	/**/
+	"csrw	mscratch,sp\n\t" /* chx_set_running */
+	"lw	a0,0(sp)\n\t"
+	"beqz	a0,1f\n"
+    ".L_RETURN_TO_PREEMPTED_THREAD:\n\t"
+	"csrw	mepc,a0\n\t"
+	SETUP_MSTATUS_FROM_MACHINE_STATUS
+	RESTORE_OTHER_REGISTERS
+	"lw	tp,16(sp)\n\t"    /* Application is free to other use of TP */
+	"lw	sp,8(sp)\n\t"
+	"mret\n"
+    "1:\n\t"
+	"lw	a0,-4(sp)\n\t"  /* Get the result value */
+	"mv	tp,sp\n\t"
+	"lw	sp,8(sp)\n\t"
+	"csrsi	mstatus,8\n"  /* Unmask interrupts.  */
+    ".L_V_CONTEXT_SWITCH_FINISH:"
+	: "=r" (result)
+	: "0" (tp_next)
+	: "ra", "t0", "t1", "t2", "t3", "t4", "t5", "t6",
+	  "a1", "a2", "a3", "a4", "a5", "a6", "a7",
+	  "memory");
+
+  return result;
+}
+
+extern void cause_link_time_error_unexpected_size_of_struct_chx_thread (void);
+
+static struct chx_thread *
+chopstx_create_arch (uintptr_t stack_addr, size_t stack_size,
+		     voidfunc thread_entry, void *arg)
+{
+  struct chx_thread *tp;
+  void *stack;
+  register uint32_t gp;
+
+  asm (	"mv	%0,gp" : "=r" (gp));
+
+  if (CHOPSTX_THREAD_SIZE != sizeof (struct chx_thread))
+    cause_link_time_error_unexpected_size_of_struct_chx_thread ();
+
+  if (stack_size < sizeof (struct chx_thread))
+    chx_fatal (CHOPSTX_ERR_THREAD_CREATE);
+
+  stack = (void *)(stack_addr + stack_size - sizeof (struct chx_thread));
+  tp = (struct chx_thread *)stack;
+  memset (&tp->tc, 0, sizeof (tp->tc));
+  tp->tc.reg[REG_A0] = (uint32_t)arg;
+  tp->tc.reg[REG_RA] = (uint32_t)chopstx_exit;
+  tp->tc.reg[REG_PC] = (uint32_t)thread_entry;
+  tp->tc.reg[REG_GP] = gp;
+  tp->tc.reg[REG_TP] = (uint32_t)&tp->tc;
+  tp->tc.reg[REG_SP] = (uint32_t)stack;
+  tp->tc.machine_status = MACHINE_STATUS_INIT;
+
+  return tp;
+}
+
+
+/*
+ * Note: Examine the assembler output carefully, because it has
+ * ((naked)) attribute
+ */
+static void __attribute__ ((naked,aligned(4)))
+chx_handle_intr (void)
+{
+  struct chx_thread *tp_next;
+  uint32_t irq_num;
+
+  /*
+   * stack setup to __main_stack_end__
+   * save registers.
+   */
+  asm volatile (
+	"csrrw	sp,mscratch,sp\n\t" /* SP to MSCRATCH, thread pointer into SP */
+	"# Check if it is IDLE\n\t"
+	"bnez	sp,0f\n\t"
+	/**/
+	"csrrw	sp,mscratch,sp\n\t" /* Recover MSCRATCH, the thread pointer */
+	"li	a0,0x80\n\t"
+	"csrrc	x0,mstatus,a0\n\t"  /* Clear MPIE bit to mask interrupt     */
+	"csrr	a0,mcause\n\t"
+	"mret\n"
+    "0:\n\t"
+	"sw	tp,16(sp)\n\t"      /* Application is free to other use of TP */
+	SAVE_OTHER_REGISTERS
+	"csrr	a0,mepc\n\t"
+	"sw	a0,0(sp)\n\t"
+	/**/
+	"mv	tp,sp\n\t"          /* TP is now the thread pointer */
+	"csrrw	sp,mscratch,sp\n\t" /* TP to MSCRATCH, SP_old into SP */
+	"sw	sp,8(tp)\n\t"
+	"la	sp,__main_stack_end__");
+
+  /*
+   * The stack at __main_stack_end__ is shared data between chx_idle
+   * and this handler.  When it comes here, there is no active chx_idle,
+   * so, it is safe to use the stack.
+   *
+   * Note that when there are multiple cores, we need this stack for
+   * each core.
+   */
+
+  asm (	"csrr	%0,mcause\n\t"
+	"slli	%0,%0,20\n\t"
+	"srli	%0,%0,20"       /* Take lower 12-bit of MCAUSE */
+	: "=r" (irq_num));
+
+  tp_next = NULL;
+  if (irq_num == SWINT_IRQ)
+    chx_sw_int (0);
+  else if (irq_num == TIMER_IRQ)
+    tp_next = chx_timer_expired ();
+  else if (irq_num == MEMERR_IRQ)
+    memory_error ();
+  else
+    tp_next = chx_recv_irq (irq_num);
+
+  if (!tp_next)
+    asm volatile (
+	"mv	sp,tp\n\t"      /* Using SP, we can use C.SWSP instruction */
+	RESTORE_OTHER_REGISTERS
+	"lw	tp,16(sp)\n\t"  /* Application is free to other use of TP */
+	"lw	sp,8(sp)\n\t"
+	"mret");
+
+  tp_next = chx_running_preempted (tp_next);
+
+  asm volatile (
+	"# Involuntary context switch\n\t"
+	"mv	sp,tp\n\t"      /* Using SP, we can use C.SWSP instruction */
+	SAVE_CALLEE_SAVE_REGISTERS
+	/*
+	 * MACHINE_STATUS = (MSTATUS & 0x00001f80)
+	 */
+	"csrr	a1,mstatus\n\t"
+	"andi	a1,a1,-9\n\t"     /* Clear MIE (bit3) */
+	"slli	a1,a1,19\n\t"     /* Clear bit31 to bit13 */
+	"srli	a1,a1,19\n\t"     /* MPP..MPIE from MSTATUS  */
+	"sw	a1,128(sp)\n"
+    ".L_IV_CONTEXT_SWITCH_BEGIN:\n\t"
+	"addi	%0,%0,20\n\t"
+	"mv	sp,%0\n\t"
+	RESTORE_CALLEE_SAVE_REGISTERS
+	/**/
+	"csrw	mscratch,sp\n\t" /* chx_set_running */
+	"lw	a0,0(sp)\n\t"
+	"bnez	a0,.L_RETURN_TO_PREEMPTED_THREAD\n\t"
+	/**/
+	"lw	a0,-4(sp)\n\t"    /* Get the result value */
+	"mv	tp,sp\n\t"
+	"lw	sp,8(sp)\n\t"
+	"la	a1,.L_V_CONTEXT_SWITCH_FINISH\n\t"
+	"csrw	mepc,a1\n\t"
+	"li	a1,0x188\n\t"     /* Set MPIE and MPP bits */
+	"slli	a1,a1,4\n\t"
+	"csrrs	x0,mstatus,a1\n\t"/* Prev: Machine mode, enable interrupt */
+	"mret"                    /* Return to Prev  */
+	: /* no output */ : "r" (tp_next) : "memory");
+}
--- a/chopstx-riscv32.h
+++ b/chopstx-riscv32.h
@@ -0,0 +1,61 @@
+/*
+ * The thread context: specific to RISC-V 32.
+ *
+ * Calling convention matters when we implement context switch.
+ *
+ * We implement a voluntary context switch function which follows
+ * standard calling convension.  The function doesn't need to save
+ * caller save registers (function arguments and temporaries) and
+ * fixed ones (global pointer and thread pointer) to a thread context
+ * struct.  Only it needs to care about stack pointer and saved
+ * registers.
+ *
+ * For interrupt handling when it returns directly to original thread,
+ * we can avoid saving all registers; It can only save registers used
+ * in that handling.  When it returns to another thread, that is, when
+ * it does involuntary context switch (also called "thread
+ * preemption"), all registers should be saved.
+ *
+ * In Chopstx, we don't use nested interrupt of machine.  So, when a
+ * thread is interrupted, the interrupted context is always one of
+ * application threads or the idle thread.  We have a dedicated stack
+ * for exception handling.
+ *
+ * Here is RISC-V calling convention.
+ *
+ * Register   ABI name   Description     Saver   other usage
+ * x0         zero       0, hard-wired   --
+ * x1         ra         return address  caller
+ * x2         sp         stack pointer   callEE
+ * x3         gp         global pointer  --
+ * x4         tp         thread pointer  --
+ * x5-7       t0-2       temporary       caller
+ * x8         s0/fp      saved register  callEE  frame pointer
+ * x9         s1         saved register  callEE
+ * x10-11     a0-1       argument        caller  return value
+ * x12-17     a2-7       argument        caller
+ * x18-27     s2-11      saved register  callEE
+ * x28-31     t3-6       temporary       caller
+ *
+ * Simply, we have entries of all registers in the thread context.  We
+ * don't use stack to save/restore part of its context.  We don't put
+ * any other constraints such that an application should always keep
+ * gp and/or tp registers; It is free for an application to
+ * temporarily use those registers beyond a conventional usage (e.g.,
+ * for some specific routines like hash computation).
+ *
+ * We use the first entry, reg[0], to store PC, because x0 is always 0,
+ * no need to save/restore it.
+ *
+ * Core specific machine status information is saved into the last
+ * entry, MACHINE_STATUS.  For Bumblebee core, it is composed by bits
+ * of mstatus and msubm.
+ */
+struct tcontext {
+  uint32_t reg[32];
+  uint32_t machine_status;
+};
+
+typedef struct tcontext tcontext_t;
+
+#define CHOPSTX_THREAD_SIZE 160
--- a/chopstx.c
+++ b/chopstx.c
@@ -1,7 +1,7 @@
 /*
 * chopstx.c - Threads and only threads.
 *
- * Copyright (C) 2013, 2014, 2015, 2016, 2017, 2018, 2019
+ * Copyright (C) 2013, 2014, 2015, 2016, 2017, 2018, 2019, 2020, 2021
 *               Flying Stone Technology
 * Author: NIIBE Yutaka <gniibe@fsij.org>
 *
@@ -73,11 +73,7 @@ chx_fatal (uint32_t err_code)
 }

 /* Include the definition of thread context structure.  */
-#ifdef GNU_LINUX_EMULATION
-#include "chopstx-gnu-linux.h"
-#else
-#include "chopstx-cortex-m.h"
-#endif
+#include ARCH_HEADER

 /* ALLOW_SLEEP for the idle thread.  */
 int chx_allow_sleep;
@@ -101,9 +97,8 @@ static struct chx_queue q_join;
 static struct chx_queue q_intr;

 /* Forward declaration(s). */
-static void chx_request_preemption (uint16_t prio);
 static int chx_wakeup (struct chx_pq *p);
-static struct chx_thread * chx_timer_insert (struct chx_thread *tp, uint32_t usec);
+static struct chx_thread *chx_timer_insert (struct chx_thread *tp, uint32_t usec);
 static uint32_t chx_timer_dequeue (struct chx_thread *tp);


@@ -297,15 +292,15 @@ chx_ready_enqueue (struct chx_thread *tp)
  chx_spin_unlock (&q_ready.lock);
 }

+static struct chx_thread *chx_timer_expired (void);
+static struct chx_thread *chx_recv_irq (uint32_t irq_num);
+static struct chx_thread *chx_running_preempted (struct chx_thread *tp_next);
+
 /*
 * Here comes architecture specific code.
 */

-#ifdef GNU_LINUX_EMULATION
-#include "chopstx-gnu-linux.c"
-#else
-#include "chopstx-cortex-m.c"
-#endif
+#include ARCH_IMPL

 static void
 chx_set_timer (struct chx_thread *tp, uint32_t ticks)
@@ -384,7 +379,7 @@ chx_timer_dequeue (struct chx_thread *tp)
 }


-void
+static struct chx_thread *
 chx_timer_expired (void)
 {
  struct chx_thread *tp;
@@ -392,7 +387,9 @@ chx_timer_expired (void)
  uint16_t prio = 0;			/* Use uint16_t here. */

  chx_spin_lock (&q_timer.lock);
-  if ((tp = (struct chx_thread *)ll_pop (&q_timer.q)))
+  if (!(tp = (struct chx_thread *)ll_pop (&q_timer.q)))
+    chx_systick_reload (0);
+  else
    {
      uint32_t next_tick = tp->v;

@@ -404,7 +401,9 @@ chx_timer_expired (void)
 	if ((uint16_t)tp->prio > prio)
 	  prio = (uint16_t)tp->prio;

-      if (!ll_empty (&q_timer.q))
+      if (ll_empty (&q_timer.q))
+	chx_systick_reload (0);
+      else
 	{
 	  struct chx_thread *tp_next;

@@ -424,13 +423,115 @@ chx_timer_expired (void)
 		  prio = (uint16_t)tp->prio;
 	    }

-	  if (!ll_empty (&q_timer.q))
+	  if (ll_empty (&q_timer.q))
+	    chx_systick_reload (0);
+	  else
 	    chx_set_timer ((struct chx_thread *)&q_timer.q, next_tick);
 	}
    }

  chx_spin_unlock (&q_timer.lock);
-  chx_request_preemption (prio);
+
+  if (running == NULL || (uint16_t)running->prio < prio)
+    {
+      tp = chx_ready_pop ();
+      if (tp != running)
+	return tp;
+      else
+	/* When tp->flag_sched_rr == 1, it's possible.	No context switch.  */
+	return NULL;
+    }
+  else
+    return NULL;
+}
+
+
+static struct chx_thread *
+chx_recv_irq (uint32_t irq_num)
+{
+  struct chx_pq *p;
+  struct chx_thread *r = chx_running ();
+
+  chx_disable_intr (irq_num);
+  chx_spin_lock (&q_intr.lock);
+  for (p = q_intr.q.next; p != (struct chx_pq *)&q_intr.q; p = p->next)
+    if (p->v == irq_num)
+      /* should be one at most.  */
+      break;
+  chx_spin_unlock (&q_intr.lock);
+
+  if (p != (struct chx_pq *)&q_intr.q)
+    {
+      struct chx_px *px = (struct chx_px *)p;
+
+      ll_dequeue (p);
+      chx_wakeup (p);
+
+      if (r == NULL || (uint16_t)r->prio < px->master->prio)
+	return chx_ready_pop ();
+    }
+
+  return NULL;
+}
+
+
+static struct chx_thread * __attribute__ ((noinline))
+chx_running_preempted (struct chx_thread *tp_next)
+{
+  struct chx_thread *r = chx_running ();
+
+  if (r == NULL)
+    return tp_next;
+
+  if (r->flag_sched_rr)
+    {
+      if (r->state == THREAD_RUNNING)
+	{
+	  chx_timer_dequeue (r);
+	  chx_ready_enqueue (r);
+	}
+      /*
+       * It may be THREAD_READY after chx_timer_expired.
+       * Then, do nothing.  It's in the ready queue.
+       */
+    }
+  else
+    chx_ready_push (r);
+
+  return tp_next;
+}
+
+
+/*
+ * chx_sched: switch to another thread.
+ *
+ * There are two cases:
+ *   YIELD=0 (SLEEP): Current RUNNING thread is already connected to
+ *                    something (mutex, cond, intr, etc.)
+ *   YIELD=1 (YIELD): Current RUNNING thread is active,
+ *                    it is needed to be enqueued to READY queue.
+ *
+ * Returns:
+ *       >= 1 on wakeup by others, value means ticks remained for sleep.
+ *          0 on normal wakeup (timer expiration, lock acquirement).
+ *         -1 on cancellation.
+ */
+static uintptr_t __attribute__ ((noinline))
+chx_sched (uint32_t yield)
+{
+  struct chx_thread *tp;
+
+  if (yield)
+    {
+      struct chx_thread *r = chx_running ();
+
+      if (r->flag_sched_rr)
+	chx_timer_dequeue (r);
+      chx_ready_enqueue (r);
+    }
+
+  tp = chx_ready_pop ();
+  return voluntary_context_switch (tp);
 }


@@ -482,9 +583,6 @@ chx_init (struct chx_thread *tp)
  tp->parent = NULL;
  tp->v = 0;

-  if (CHX_PRIO_MAIN_INIT >= CHOPSTX_PRIO_INHIBIT_PREEMPTION)
-    chx_cpu_sched_lock ();
-
  tp->prio = CHX_PRIO_MAIN_INIT;

  chopstx_main = (chopstx_t)tp;
@@ -1411,6 +1509,7 @@ chopstx_poll (uint32_t *usec_p, int n, struct chx_poll_head *const pd_array[])
  for (i = 0; i < n; i++)
    chx_proxy_init (&px[i], &counter);

+ again:
  for (i = 0; i < n; i++)
    {
      pd = pd_array[i];
@@ -1473,6 +1572,20 @@ chopstx_poll (uint32_t *usec_p, int n, struct chx_poll_head *const pd_array[])
 	      ll_dequeue ((struct chx_pq *)&px[i]);
 	      chx_spin_unlock (&pc->cond->lock);
 	    }
+	  else
+	    { /* Check the condition again after woken up.  */
+	      if (pc->mutex)
+		chopstx_mutex_lock (pc->mutex);
+
+	      if ((*pc->check) (pc->arg) == 0)
+		{ /* Condition doesn't met.  */
+		  pc->ready = 0;
+		  counter--;
+		}
+
+	      if (pc->mutex)
+		chopstx_mutex_unlock (pc->mutex);
+	    }
 	}
      else if (pd->type == CHOPSTX_POLL_INTR)
 	{
@@ -1504,6 +1617,9 @@ chopstx_poll (uint32_t *usec_p, int n, struct chx_poll_head *const pd_array[])
  if (r < 0)
    chopstx_exit (CHOPSTX_CANCELED);

+  if (counter == 0 && (usec_p == NULL || *usec_p))
+    goto again;
+
  return counter;
 }

@@ -1544,7 +1660,7 @@ chopstx_setpriority (chopstx_prio_t prio_new)

  if (tp->prio < prio_cur)
    chx_sched (CHX_YIELD);
-  else if (tp->prio < CHOPSTX_PRIO_INHIBIT_PREEMPTION)
+  else
    chx_cpu_sched_unlock ();

  return prio_orig;
@@ -1584,3 +1700,23 @@ chopstx_conf_idle (int enable_sleep)

  return r;
 }
+
+
+/**
+ * chopstx_critical - Construct a critical section
+ * @func: function to be called
+ * @arg: argument to function
+ *
+ * Run the function @func with @arg under CPU schedule lock.
+ * Return void * pointer.
+ */
+void *
+chopstx_critical (void *func (void *), void *arg)
+{
+  void *p;
+
+  chx_cpu_sched_lock ();
+  p = func (arg);
+  chx_cpu_sched_unlock ();
+  return p;
+}
--- a/chopstx.h
+++ b/chopstx.h
@@ -1,7 +1,8 @@
 /*
 * chopstx.h - Threads and only threads.
 *
- * Copyright (C) 2013, 2016, 2017, 2018  Flying Stone Technology
+ * Copyright (C) 2013, 2016, 2017, 2018, 2020
+ *               Flying Stone Technology
 * Author: NIIBE Yutaka <gniibe@fsij.org>
 *
 * This file is a part of Chopstx, a thread library for embedded.
@@ -45,8 +46,6 @@ chopstx_create (uint32_t flags_and_prio,
 #define CHOPSTX_DETACHED 0x10000
 #define CHOPSTX_SCHED_RR 0x20000

-#define CHOPSTX_PRIO_INHIBIT_PREEMPTION 248
-
 void chopstx_usec_wait (uint32_t usec);

 struct chx_spinlock {
@@ -163,3 +162,5 @@ int chopstx_poll (uint32_t *usec_p, int n,
 		  struct chx_poll_head *const pd_array[]);

 int chopstx_conf_idle (int enable_sleep);
+
+void *chopstx_critical (void *func (void *), void *arg);
--- a/contrib/ackbtn-gnu-linux.c
+++ b/contrib/ackbtn-gnu-linux.c
@@ -0,0 +1,232 @@
+/*
+ * ackbtn-gnu-linux.c - Acknowledge button support for GNU/Linux
+ *
+ * Copyright (C) 2021  Free Software Initiative of Japan
+ * Author: NIIBE Yutaka <gniibe@fsij.org>
+ *
+ * This file is a part of Chopstx, a thread library for embedded.
+ *
+ * Chopstx is free software: you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 3 of the License, or
+ * (at your option) any later version.
+ *
+ * Chopstx is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
+ * General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ *
+ * As additional permission under GNU GPL version 3 section 7, you may
+ * distribute non-source form of the Program without the copy of the
+ * GNU GPL normally required by section 4, provided you inform the
+ * recipients of GNU GPL by a written offer.
+ *
+ */
+
+#include <pthread.h>
+
+#include <unistd.h>
+
+#include <stdint.h>
+#include <string.h>
+#include <chopstx.h>
+
+#include <stdio.h>
+#include <signal.h>
+#include <sys/eventfd.h>
+#include <poll.h>
+#include <errno.h>
+#include <stdlib.h>
+
+static pthread_t tid_main;
+static pthread_t tid_ui;
+
+static pthread_mutex_t mutex;
+static pthread_cond_t cond;
+static int enabled;
+static int event_fd;
+
+static void
+ackbtn_intr (int signum, siginfo_t *siginfo, void *arg)
+{
+  extern void chx_sigmask (ucontext_t *uc);
+  extern void chx_handle_intr (int signum);
+
+  ucontext_t *uc = arg;
+  (void)signum;
+  (void)siginfo;
+  chx_handle_intr (SIGUSR2);
+  chx_sigmask (uc);
+}
+
+
+#define ACKBTN_ACKED   (1 << 0)
+#define ACKBTN_TIMEOUT (1 << 2)
+
+static void *
+user_interaction (void *arg)
+{
+  struct pollfd pollfds[2];
+
+  (void)arg;
+
+  pollfds[0].fd = 0;		/* standard input */
+  pollfds[0].events = POLLIN;
+
+  pollfds[1].fd = event_fd;
+  pollfds[1].events = POLLIN;
+
+  fputs ("User interaction thread for AckBtn started.\n", stdout);
+
+  while (1)
+    {
+      unsigned int acked_or_timeout = 0;
+      char buf[256];
+
+      pthread_mutex_lock (&mutex);
+      while (!enabled)
+	pthread_cond_wait (&cond, &mutex);
+      pthread_mutex_unlock (&mutex);
+
+      /* Consume all input if any.  */
+      while (1)
+	{
+	  int r;
+
+	  pollfds[0].revents = 0;
+
+	  r = poll (pollfds, 1, 0);
+	  if (r < 0)
+	    {
+	      if (errno == EINTR)
+		continue;
+
+	      perror ("poll");
+	      exit (1);
+	    }
+
+	  if (r == 0)
+	    break;
+
+	  if ((pollfds[0].revents & POLLIN))
+	    read (0, buf, sizeof buf);
+	}
+
+      fputs ("Type RET to acknowledge (or wait for timeout) > ", stdout);
+      fflush (stdout);
+
+      while (!acked_or_timeout)
+	{
+	  pollfds[0].revents = 0;
+	  pollfds[1].revents = 0;
+
+	  if (poll (pollfds, 2, -1) < 0)
+	    {
+	      if (errno == EINTR)
+		continue;
+
+	      perror ("poll");
+	      exit (1);
+	    }
+
+	  if ((pollfds[0].revents & POLLIN))
+	    {
+	      read (0, buf, sizeof buf);
+	      acked_or_timeout |= ACKBTN_ACKED;
+	    }
+
+	  if ((pollfds[1].revents & POLLIN))
+	    acked_or_timeout |= ACKBTN_TIMEOUT;
+	}
+
+      pthread_mutex_lock (&mutex);
+      if ((acked_or_timeout & ACKBTN_ACKED))
+	{
+	  if ((acked_or_timeout & ACKBTN_TIMEOUT))
+	    /* No output of newline, as it follows timeout message.  */
+	    fputs ("Input ignored", stdout);
+	  else
+	    {
+	      pthread_kill (tid_main, SIGUSR2);
+	      fputs ("Acknowledged\n", stdout);
+	    }
+	}
+
+      if ((acked_or_timeout & ACKBTN_TIMEOUT))
+	fputs ("\nTimeout\n", stdout);
+
+      while (enabled)
+	pthread_cond_wait (&cond, &mutex);
+
+      read (event_fd, buf, sizeof (uint64_t));
+      pthread_mutex_unlock (&mutex);
+    }
+}
+
+void
+ackbtn_init (chopstx_intr_t *intr)
+{
+  int r;
+  sigset_t sigset;
+  struct sigaction act;
+
+  event_fd = eventfd (0, EFD_CLOEXEC);
+  if (event_fd < 0)
+    {
+      perror ("eventfd");
+      exit (1);
+    }
+
+  pthread_mutex_init (&mutex, NULL);
+  pthread_cond_init (&cond, NULL);
+  enabled = 0;
+
+  sigemptyset (&sigset);
+  sigaddset (&sigset, SIGUSR2);
+  sigaddset (&sigset, SIGALRM);
+
+  tid_main = pthread_self ();
+
+  /* Launch the thread for user interaction.  */
+  pthread_sigmask (SIG_BLOCK, &sigset, NULL);
+
+  r = pthread_create (&tid_ui, NULL, user_interaction, NULL);
+  if (r)
+    {
+      fprintf (stderr, "ackbtn_init: %s\n", strerror (r));
+      exit (1);
+    }
+
+  act.sa_sigaction = ackbtn_intr;
+  sigfillset (&act.sa_mask);
+  act.sa_flags = SA_SIGINFO|SA_RESTART;
+  sigaction (SIGUSR2, &act, NULL);
+
+  pthread_sigmask (SIG_UNBLOCK, &sigset, NULL);
+
+  chopstx_claim_irq (intr, SIGUSR2);
+}
+
+void
+ackbtn_enable (void)
+{
+  pthread_mutex_lock (&mutex);
+  enabled = 1;
+  pthread_cond_signal (&cond);
+  pthread_mutex_unlock (&mutex);
+}
+
+void
+ackbtn_disable (void)
+{
+  const uint64_t l = 1;
+
+  pthread_mutex_lock (&mutex);
+  enabled = 0;
+  write (event_fd, &l, sizeof (l));
+  pthread_cond_signal (&cond);
+  pthread_mutex_unlock (&mutex);
+}
--- a/contrib/adc-gnu-linux.c
+++ b/contrib/adc-gnu-linux.c
@@ -3,7 +3,7 @@
 *                   This ADC driver just fills pseudo random values.
 *                   It's completely useless other than for NeuG.
 *
- * Copyright (C) 2017  Free Software Initiative of Japan
+ * Copyright (C) 2017, 2021  Free Software Initiative of Japan
 * Author: NIIBE Yutaka <gniibe@fsij.org>
 *
 * This file is a part of Chopstx, a thread library for embedded.
@@ -33,7 +33,7 @@
 #include <chopstx.h>
 #include "adc.h"

-#define ADC_RANDOM_SEED 0x01034649 /* "Hello, father!" in Japanese */
+#include <sys/random.h>

 /*
 * Do calibration for ADC.
@@ -41,7 +41,6 @@
 int
 adc_init (void)
 {
-  srandom (ADC_RANDOM_SEED);
  return 0;
 }

@@ -55,8 +54,7 @@ uint32_t adc_buf[64];
 void
 adc_start_conversion (int offset, int count)
 {
-  while (count--)
-    adc_buf[offset++] = random ();
+  getrandom (adc_buf+offset, count, 0);
 }


--- a/contrib/spi-st.c
+++ b/contrib/spi-st.c
@@ -0,0 +1,207 @@
+/*
+ * spi-st.c - SPI driver for STM32F103/GD32F103/GD32VF103
+ *
+ * Copyright (C) 2019  Flying Stone Technology
+ * Author: NIIBE Yutaka <gniibe@fsij.org>
+ *
+ * This file is a part of Chopstx, a thread library for embedded.
+ *
+ * Chopstx is free software: you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 3 of the License, or
+ * (at your option) any later version.
+ *
+ * Chopstx is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
+ * General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ *
+ * As additional permission under GNU GPL version 3 section 7, you may
+ * distribute non-source form of the Program without the copy of the
+ * GNU GPL normally required by section 4, provided you inform the
+ * recipients of GNU GPL by a written offer.
+ *
+ */
+
+#include <stdint.h>
+#include <stdlib.h>
+#include <chopstx.h>
+#include <mcu/stm32.h>
+
+#ifndef SPI_USE_INTERRUPT
+#define SPI_BUSY_WAIT 1
+#endif
+
+/* Hardware registers */
+struct SPI {
+  volatile uint32_t CR1;
+  volatile uint32_t CR2;
+  volatile uint32_t SR;
+  volatile uint32_t DR;
+  volatile uint32_t CRCPR;
+  volatile uint32_t RXCRCR;
+  volatile uint32_t TXCRCR;
+};
+
+/* It is named SPI0 in GD32VF103, while it's "SPI1" in RM0008 of STM32F103 */
+#define SPI0_BASE           (APB2PERIPH_BASE + 0x3000)
+#define SPI0 ((struct SPI *)SPI0_BASE)
+
+#define INTR_REQ_SPI0 54        /* For GD32VF103 */
+
+static struct SPI *SPIx = SPI0;
+#ifndef SPI_BUSY_WAIT
+static struct chx_intr spi_intr;
+#endif
+static int tx_ready;
+static int rx_done;
+
+/*
+ * For now, it only support configuration of a specific use case:
+ *
+ *     SPI0 of GD32VF103
+ *     Master mode
+ *     Hardware NSS pin not used
+ *     Two unidirectional lines, full duplex
+ *     CRC enabled
+ *     8-bit data frame
+ *     MSBit first
+ *     Clock polarity: High==idle 
+ *
+ * We need to consider what kind of configuration can be specified
+ * by the API.  Perhaps, it should return an error code when it is
+ * not supported by the hardware.
+ */
+
+int
+spi_init (void)
+{
+  uint32_t cr1_reg = 0;
+
+  /* Enable SPI module */
+  RCC->APB2ENR |= (1 << 12);
+  RCC->APB2RSTR = (1 << 12);
+  RCC->APB2RSTR = 0;
+
+  /* Master mode */
+  cr1_reg |= (1 << 2);          /* In RM0008, it's called MSTR */
+
+  /* No use of hardware NSS pin */
+  cr1_reg |= (1 << 9);          /* In RM0008, it's called SSM */
+  cr1_reg |= (1 << 8);          /* In RM0008, it's called SSI */
+
+  /* Two unidirectional lines, full duplex: Bit15=0, Bit14=0, Bit10=0 */
+  /* Bit11: data-frame-format: 8-bit 0 (16-bit (1<<11)) */
+  /* But7:  bit-order: MSB first 0, LSB first (1<<7)  */
+
+  /* Enable CRC */
+  cr1_reg |= (1 << 13);
+
+  cr1_reg |= (0x02 << 3);            /* prescaler: fPCLK/8 */
+  cr1_reg |= (1 << 1);               /* clock polarity 1==idle */
+  cr1_reg |= (1 << 0);               /* second clock data capture edge */
+  cr1_reg |= (1 << 6);               /* SPI enable */
+
+  SPIx->CR1 = cr1_reg;
+
+  /* Don't touch CRCPR: Just use reset default value of 7 */
+  /* Don't touch I2SCFGR, I2SPR */
+
+
+#ifndef SPI_BUSY_WAIT
+  chopstx_claim_irq (&spi_intr, INTR_REQ_SPI0);
+  /* Enable notification for Tx empty, Rx done, or Error */
+  SPIx->CR2 = (1 << 7) | (1 << 6) | (1 << 5);
+#endif
+
+  tx_ready = 0;
+  rx_done = 0;
+
+  return 0;
+}
+
+static void
+clear_crc_err (void)
+{
+  SPIx->SR &= ~(1 << 4);
+}
+
+static void
+put_data (uint16_t data)
+{
+  tx_ready = 0;
+  rx_done = 0;
+  SPIx->DR = (uint32_t)data;
+}
+
+static uint16_t
+get_data (void)
+{
+  return ((uint16_t)SPIx->DR);
+}
+
+
+#define CHECK_TX 0
+#define CHECK_RX 1
+
+static void
+check_transmit (int for_what)
+{
+  for (;;)
+    {
+      uint16_t status;
+
+      if (for_what == CHECK_TX && tx_ready)
+	return;
+
+      if (for_what == CHECK_RX && rx_done)
+	return;
+
+#ifndef SPI_BUSY_WAIT
+      /* Wait an event */
+      chopstx_intr_wait (&spi_intr);
+#endif
+
+      status = SPIx->SR;
+
+      if ((status & (1 << 0)))
+	rx_done = 1;
+
+      if ((status & (1 << 1)))
+	tx_ready = 1;
+
+      if ((status & (1 << 4)))
+	{
+	  /*FIXME: stat crc_err_count++ */
+	  clear_crc_err ();
+	}
+
+#if 0
+      /*FIXME: stat err_count++ */
+      if ((status & 0x00fc))
+	{
+	}
+#endif
+
+#ifndef SPI_BUSY_WAIT
+      chopstx_intr_done (&spi_intr);
+#endif
+    }
+}
+
+void
+spi_send (uint16_t data)
+{
+  check_transmit (CHECK_TX);
+  put_data (data);
+}
+
+uint16_t
+spi_recv (void)
+{
+  check_transmit (CHECK_RX);
+  return get_data ();
+}
--- a/contrib/spi.h
+++ b/contrib/spi.h
@@ -0,0 +1,3 @@
+int spi_init (void);
+void spi_send (uint16_t data);
+uint16_t spi_recv (void);
--- a/contrib/usart-common-f103.c
+++ b/contrib/usart-common-f103.c
@@ -0,0 +1,386 @@
+static void
+usart_config_recv_enable (struct USART *USARTx, int on)
+{
+  if (on)
+    USARTx->CR1 |= USART_CR1_RE;
+  else
+    USARTx->CR1 &= ~USART_CR1_RE;
+}
+
+
+int
+usart_config (uint8_t dev_no, uint32_t config_bits)
+{
+  struct USART *USARTx = get_usart_dev (dev_no);
+  uint8_t baud_spec = (config_bits & MASK_BAUD);
+  int i;
+  uint32_t cr1_config = (USART_CR1_UE | USART_CR1_RXNEIE | USART_CR1_TE);
+				/* TXEIE/TCIE will be enabled when
+				   putting char */
+				/* No CTSIE, PEIE, IDLEIE, LBDIE */
+  if (USARTx == NULL)
+    return -1;
+
+  /* Disable USART before configure.  */
+  USARTx->CR1 &= ~USART_CR1_UE;
+
+  if (((config_bits & MASK_CS) == CS7 && (config_bits & PARENB))
+      || ((config_bits & MASK_CS) == CS8 && (config_bits & PARENB) == 0))
+    cr1_config &= ~USART_CR1_M;
+  else if ((config_bits & MASK_CS) == CS8)
+    cr1_config |=  USART_CR1_M;
+  else
+    return -1;
+
+  if ((config_bits & PARENB) == 0)
+    cr1_config &= ~(USART_CR1_PCE | USART_CR1_PEIE);
+  else
+    cr1_config |=  (USART_CR1_PCE | USART_CR1_PEIE);
+
+  if ((config_bits & PARODD) == 0)
+    cr1_config &= ~USART_CR1_PS;
+  else
+    cr1_config |=  USART_CR1_PS;
+
+  if ((config_bits & MASK_STOP) == STOP0B5)
+    USARTx->CR2 = (0x1 << 12);
+  else if ((config_bits & MASK_STOP) == STOP1B)
+    USARTx->CR2 = (0x0 << 12);
+  else if ((config_bits & MASK_STOP) == STOP1B5)
+    USARTx->CR2 = (0x3 << 12);
+  else /* if ((config_bits & MASK_STOP) == STOP2B) */
+    USARTx->CR2 = (0x2 << 12);
+
+  for (i = 0; i < NUM_BAUD; i++)
+    if (brr_table[i].baud_spec == baud_spec)
+      break;
+
+  if (i >= NUM_BAUD)
+    return -1;
+
+  USARTx->BRR = brr_table[i].brr_value;
+
+  if ((config_bits & MASK_FLOW))
+    USARTx->CR3 = USART_CR3_CTSE | USART_CR3_RTSE;
+  else
+    USARTx->CR3 = 0;
+
+  if (!(config_bits & MASK_MODE))
+    cr1_config |= USART_CR1_RE;
+
+  USARTx->CR1 = cr1_config;
+
+  /* SCEN (smartcard enable) should be set _after_ CR1.  */
+  if ((config_bits & MASK_MODE))
+    {
+      if ((config_bits & MASK_MODE) == MODE_SMARTCARD)
+	{
+	  USARTx->GTPR = (1 << 8) | 5;
+	  USARTx->CR3 |= (USART_CR3_SCEN | USART_CR3_NACK);
+	}
+      else if ((config_bits & MASK_MODE) == MODE_IRDA)
+	USARTx->CR3 |= (1 << 1);
+      else if ((config_bits & MASK_MODE) == MODE_IRDA_LP)
+	USARTx->CR3 |= (1 << 2) | (1 << 1);
+    }
+
+  return 0;
+}
+
+
+void
+usart_init0 (int (*cb) (uint8_t dev_no, uint16_t notify_bits))
+{
+  int i;
+
+  ss_notify_callback = cb;
+
+  for (i = 0; i < NUM_USART; i++)
+    {
+      if (usart_array[i].stat)
+	usart_array[i].stat->dev_no = i + USART_DEVNO_START;
+      chopstx_claim_irq (usart_array[i].intr, usart_array[i].irq_num);
+    }
+
+  usart_rcc_setup ();
+}
+
+#define UART_STATE_BITMAP_RX_CARRIER (1 << 0)
+#define UART_STATE_BITMAP_TX_CARRIER (1 << 1)
+#define UART_STATE_BITMAP_BREAK      (1 << 2)
+#define UART_STATE_BITMAP_RINGSIGNAL (1 << 3)
+#define UART_STATE_BITMAP_FRAMING    (1 << 4)
+#define UART_STATE_BITMAP_PARITY     (1 << 5)
+#define UART_STATE_BITMAP_OVERRUN    (1 << 6)
+
+static int
+handle_intr (struct USART *USARTx, struct rb *rb2a, struct usart_stat *stat)
+{
+  int tx_ready = 0;
+  uint32_t r = USARTx->SR;
+  int notify_bits = 0;
+  int smartcard_mode = ((USARTx->CR3 & USART_CR3_SCEN) != 0);
+
+  if (smartcard_mode)
+    {
+      if ((r & USART_SR_TC))
+	{
+	  tx_ready = 1;
+	  USARTx->CR1 &= ~USART_CR1_TCIE;
+	}
+    }
+  else
+    {
+      if ((r & USART_SR_TXE))
+	{
+	  tx_ready = 1;
+	  USARTx->CR1 &= ~USART_CR1_TXEIE;
+	}
+    }
+
+  if ((r & USART_SR_RXNE))
+    {
+      uint32_t data = USARTx->DR;
+
+      /* DR register should be accessed even if data is not used.
+       * Its read-access has side effect of clearing error flags.
+       */
+      asm volatile ("" : : "r" (data) : "memory");
+
+      if ((r & USART_SR_NE))
+	stat->err_rx_noise++;
+      else if ((r & USART_SR_FE))
+	{
+	  /* NOTE: Noway to distinguish framing error and break  */
+
+	  stat->rx_break++;
+	  notify_bits |= UART_STATE_BITMAP_BREAK;
+	}
+      else if ((r & USART_SR_PE))
+	{
+	  stat->err_rx_parity++;
+	  notify_bits |= UART_STATE_BITMAP_PARITY;
+	}
+      else
+	{
+	  if ((r & USART_SR_ORE))
+	    {
+	      stat->err_rx_overrun++;
+	      notify_bits |= UART_STATE_BITMAP_OVERRUN;
+	    }
+
+	  /* XXX: if CS is 7-bit, mask it, or else parity bit in upper layer */
+	  if (rb_ll_put (rb2a, (data & 0xff)) < 0)
+	    stat->err_rx_overflow++;
+	  else
+	    stat->rx++;
+	}
+    }
+  else if ((r & USART_SR_ORE))
+    {				/* Clear ORE */
+      uint32_t data = USARTx->DR;
+      asm volatile ("" : : "r" (data) : "memory");
+      stat->err_rx_overrun++;
+      notify_bits |= UART_STATE_BITMAP_OVERRUN;
+    }
+
+  if (notify_bits)
+    {
+      if (ss_notify_callback
+	  && (*ss_notify_callback) (stat->dev_no, notify_bits))
+	stat->err_notify_overflow++;
+    }
+
+  return tx_ready;
+}
+
+static int
+handle_tx (struct USART *USARTx, struct rb *rb2h, struct usart_stat *stat)
+{
+  int tx_ready = 1;
+  int c = rb_ll_get (rb2h);
+
+  if (c >= 0)
+    {
+      uint32_t r;
+      int smartcard_mode = ((USARTx->CR3 & USART_CR3_SCEN) != 0);
+
+      USARTx->DR = (c & 0xff);
+      stat->tx++;
+      r = USARTx->SR;
+      if (smartcard_mode)
+	{
+	  if ((r & USART_SR_TC) == 0)
+	    {
+	      tx_ready = 0;
+	      USARTx->CR1 |= USART_CR1_TCIE;
+	    }
+	}
+      else
+	{
+	  if ((r & USART_SR_TXE) == 0)
+	    {
+	      tx_ready = 0;
+	      USARTx->CR1 |= USART_CR1_TXEIE;
+	    }
+	}
+    }
+
+  return tx_ready;
+}
+
+int
+usart_send_break (uint8_t dev_no)
+{
+  struct USART *USARTx = get_usart_dev (dev_no);
+  if (USARTx == NULL)
+    return -1;
+
+  if ((USARTx->CR1 & 0x01))
+    return 1;	/* Busy sending break, which was requested before.  */
+
+  USARTx->CR1 |= 0x01;
+  return 0;
+}
+
+int
+usart_block_sendrecv (uint8_t dev_no, const char *s_buf, uint16_t s_buflen,
+		      char *r_buf, uint16_t r_buflen,
+		      uint32_t *timeout_block_p, uint32_t timeout_char)
+{
+  uint32_t timeout;
+  uint8_t *p;
+  int len;
+  uint32_t r;
+  uint32_t data;
+  struct USART *USARTx = get_usart_dev (dev_no);
+  int smartcard_mode = ((USARTx->CR3 & USART_CR3_SCEN) != 0);
+  struct chx_intr *usartx_intr = get_usart_intr (dev_no);
+  struct chx_poll_head *ph[1];
+
+  if (usartx_intr == NULL)
+    return -1;
+
+  ph[0] = (struct chx_poll_head *)usartx_intr;
+
+  p = (uint8_t *)s_buf;
+  if (p)
+    {
+      if (smartcard_mode)
+	usart_config_recv_enable (USARTx, 0);
+
+      USARTx->CR1 |= USART_CR1_TXEIE;
+
+      /* Sending part */
+      while (1)
+	{
+	  chopstx_poll (NULL, 1, ph);
+
+	  r = USARTx->SR;
+
+	  /* Here, ignore recv error(s).  */
+	  if ((r & USART_SR_RXNE) || (r & USART_SR_ORE))
+	    {
+	      data = USARTx->DR;
+	      asm volatile ("" : : "r" (data) : "memory");
+	    }
+
+	  if ((r & USART_SR_TXE))
+	    {
+	      if (s_buflen == 0)
+		break;
+	      else
+		{
+		  /* Keep TXEIE bit */
+		  USARTx->DR = *p++;
+		  s_buflen--;
+		}
+	    }
+
+	  chopstx_intr_done (usartx_intr);
+	}
+
+      USARTx->CR1 &= ~USART_CR1_TXEIE;
+      if (smartcard_mode)
+	{
+	  if (timeout_block_p && (*timeout_block_p))
+	    do
+	      r = USARTx->SR;
+	    while (((r & USART_SR_TC) == 0));
+
+	  usart_config_recv_enable (USARTx, 1);
+
+	  if (timeout_block_p && *timeout_block_p == 0)
+	    {
+	      /* Ignoring the echo back.  */
+	      do
+		r = USARTx->SR;
+	      while (((r & USART_SR_TC) == 0));
+
+	      if ((r & USART_SR_RXNE))
+		{
+		  data = USARTx->DR;
+		  asm volatile ("" : : "r" (data) : "memory");
+		}
+
+	      *timeout_block_p = timeout_char;
+	    }
+	}
+
+      chopstx_intr_done (usartx_intr);
+    }
+
+  if (r_buf == NULL)
+    return 0;
+
+  if (!p)
+    if (smartcard_mode)
+      usart_config_recv_enable (USARTx, 1);
+
+  /* Receiving part */
+  r = chopstx_poll (timeout_block_p, 1, ph);
+  if (r == 0)
+    return 0;
+
+  p = (uint8_t *)r_buf;
+  len = 0;
+
+  while (1)
+    {
+      r = USARTx->SR;
+
+      data = USARTx->DR;
+      asm volatile ("" : : "r" (data) : "memory");
+
+      if ((r & USART_SR_RXNE))
+	{
+	  if ((r & USART_SR_NE) || (r & USART_SR_FE) || (r & USART_SR_PE))
+	    /* ignore error, for now.  XXX: ss_notify */
+	    ;
+	  else
+	    {
+	      *p++ = (data & 0xff);
+	      len++;
+	      r_buflen--;
+	      if (r_buflen == 0)
+		{
+		  chopstx_intr_done (usartx_intr);
+		  break;
+		}
+	    }
+	}
+      else if ((r & USART_SR_ORE))
+	{
+	  data = USARTx->DR;
+	  asm volatile ("" : : "r" (data) : "memory");
+	}
+
+      chopstx_intr_done (usartx_intr);
+      timeout = timeout_char;
+      r = chopstx_poll (&timeout, 1, ph);
+      if (r == 0)
+	break;
+    }
+
+  return len;
+}
--- a/contrib/usart-common.c
+++ b/contrib/usart-common.c
@@ -203,7 +203,11 @@ rb_get_prepare_poll (struct rb *rb, chopstx_poll_cond_t *poll_desc)
 const struct usart_stat *
 usart_stat (uint8_t dev_no)
 {
-  if (dev_no < USART_DEVNO_START || dev_no > USART_DEVNO_END)
+#if USART_DEVNO_START
+  if (dev_no < USART_DEVNO_START)
+    return NULL;
+#endif
+  if (dev_no > USART_DEVNO_END)
    return NULL;
  return usart_array[dev_no - USART_DEVNO_START].stat;
 }
@@ -211,7 +215,11 @@ usart_stat (uint8_t dev_no)
 static struct USART *
 get_usart_dev (uint8_t dev_no)
 {
-  if (dev_no < USART_DEVNO_START || dev_no > USART_DEVNO_END)
+#if USART_DEVNO_START
+  if (dev_no < USART_DEVNO_START)
+    return NULL;
+#endif
+  if (dev_no > USART_DEVNO_END)
    return NULL;
  return usart_array[dev_no - USART_DEVNO_START].USART;
 }
@@ -219,7 +227,11 @@ get_usart_dev (uint8_t dev_no)
 static struct rb *
 get_usart_rb_h2a (uint8_t dev_no)
 {
-  if (dev_no < USART_DEVNO_START || dev_no > USART_DEVNO_END)
+#if USART_DEVNO_START
+  if (dev_no < USART_DEVNO_START)
+    return NULL;
+#endif
+  if (dev_no > USART_DEVNO_END)
    return NULL;
  return usart_array[dev_no - USART_DEVNO_START].rb_h2a;
 }
@@ -227,7 +239,11 @@ get_usart_rb_h2a (uint8_t dev_no)
 static struct rb *
 get_usart_rb_a2h (uint8_t dev_no)
 {
-  if (dev_no < USART_DEVNO_START || dev_no > USART_DEVNO_END)
+#if USART_DEVNO_START
+  if (dev_no < USART_DEVNO_START)
+    return NULL;
+#endif
+  if (dev_no > USART_DEVNO_END)
    return NULL;
  return usart_array[dev_no - USART_DEVNO_START].rb_a2h;
 }
@@ -235,7 +251,11 @@ get_usart_rb_a2h (uint8_t dev_no)
 static struct chx_intr *
 get_usart_intr (uint8_t dev_no)
 {
-  if (dev_no < USART_DEVNO_START || dev_no > USART_DEVNO_END)
+#if USART_DEVNO_START
+  if (dev_no < USART_DEVNO_START)
+    return NULL;
+#endif
+  if (dev_no > USART_DEVNO_END)
    return NULL;
  return usart_array[dev_no - USART_DEVNO_START].intr;
 }
--- a/contrib/usart-gd32vf103.c
+++ b/contrib/usart-gd32vf103.c
@@ -0,0 +1,101 @@
+/*
+ * usart-gd32vf103.c - USART driver for GD32VF103 (USART0)
+ *
+ * Copyright (C) 2017, 2019  g10 Code GmbH
+ * Author: NIIBE Yutaka <gniibe@fsij.org>
+ *
+ * This file is a part of Chopstx, a thread library for embedded.
+ *
+ * Chopstx is free software: you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 3 of the License, or
+ * (at your option) any later version.
+ *
+ * Chopstx is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
+ * General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ *
+ * As additional permission under GNU GPL version 3 section 7, you may
+ * distribute non-source form of the Program without the copy of the
+ * GNU GPL normally required by section 4, provided you inform the
+ * recipients of GNU GPL by a written offer.
+ *
+ */
+
+#include <stdint.h>
+#include <stdlib.h>
+#include <chopstx.h>
+#include <mcu/stm32.h>
+#include <contrib/usart.h>
+#include <contrib/usart-impl.h>
+#include <contrib/usart-impl-f103.h>
+
+#define USART0_BASE           (APB2PERIPH_BASE + 0x3800)
+#define USART0 ((struct USART *)USART0_BASE)
+
+static struct usart_stat usart0_stat;
+
+static struct chx_intr usart0_intr;
+
+#define BUF_A2H_SIZE 256
+#define BUF_H2A_SIZE 512
+static uint8_t buf_usart0_rb_a2h[BUF_A2H_SIZE];
+static uint8_t buf_usart0_rb_h2a[BUF_H2A_SIZE];
+
+static struct rb usart0_rb_a2h;
+static struct rb usart0_rb_h2a;
+
+static chopstx_poll_cond_t usart0_app_write_event;
+
+/* Global variables so that it can be easier to debug.  */
+static int usart0_tx_ready;
+
+#define INTR_REQ_USART0 56
+
+#define USART_DEVNO_START 0
+#define USART_DEVNO_END 0
+
+static const struct usart usart_array[] =
+  {
+   { USART0, &usart0_intr, INTR_REQ_USART0,
+     &usart0_stat, &usart0_rb_a2h, &usart0_rb_h2a, buf_usart0_rb_a2h,
+     buf_usart0_rb_h2a, &usart0_app_write_event, &usart0_tx_ready },
+  };
+
+/* It's 96MHz f_PCLK */
+static const struct brr_setting brr_table[] = {
+  /* Can't be represented in 16-bit { B600,    (10000 << 4)}, */
+  /* Can't be represented in 16-bit { B1200,   (5000 << 4)},  */
+  { B2400,   ( 2500 << 4)|0},
+  { B9600,   (  625 << 4)|0},
+  { B19200,  (  312 << 4)|8},
+  { B57600,  (  104 << 4)|3},
+  { B115200, (   52 << 4)|1},
+  { B230400, (   26 << 4)|0},
+  { B460800, (   13 << 4)|0},
+  { B921600, (    6 << 4)|8},
+  { BSCARD1,  ( 620 << 4)|0},	/*   9677 */
+  { BSCARD2,  ( 310 << 4)|0},	/*  19354 */
+  { BSCARD4,  ( 155 << 4)|0},	/*  38709 */
+  { BSCARD8,  (  77 << 4)|8},	/*  77419 */
+  { BSCARD12, (  51 << 4)|11},	/* 116129 */
+  { BSCARD16, (  38 << 4)|13},	/* 154506 */
+  { BSCARD20, (  31 << 4)|0},	/* 193548 */
+};
+
+#include "usart-common.c"
+
+static void
+usart_rcc_setup (void)
+{
+  /* Enable USART0 clock, and strobe reset.  */
+  RCC->APB2ENR |= (1 << 14);
+  RCC->APB2RSTR = (1 << 14);
+  RCC->APB2RSTR = 0;
+}
+
+#include "usart-common-f103.c"
--- a/contrib/usart-impl-f103.h
+++ b/contrib/usart-impl-f103.h
@@ -0,0 +1,42 @@
+/* Hardware registers */
+struct USART {
+  volatile uint32_t SR;
+  volatile uint32_t DR;
+  volatile uint32_t BRR;
+  volatile uint32_t CR1;
+  volatile uint32_t CR2;
+  volatile uint32_t CR3;
+  volatile uint32_t GTPR;
+};
+
+#define USART_SR_CTS	(1 << 9)
+#define USART_SR_LBD	(1 << 8)
+#define USART_SR_TXE	(1 << 7)
+#define USART_SR_TC	(1 << 6)
+#define USART_SR_RXNE	(1 << 5)
+#define USART_SR_IDLE	(1 << 4)
+#define USART_SR_ORE	(1 << 3)
+#define USART_SR_NE	(1 << 2)
+#define USART_SR_FE	(1 << 1)
+#define USART_SR_PE	(1 << 0)
+
+
+#define USART_CR1_UE		(1 << 13)
+#define USART_CR1_M		(1 << 12)
+#define USART_CR1_WAKE		(1 << 11)
+#define USART_CR1_PCE		(1 << 10)
+#define USART_CR1_PS		(1 <<  9)
+#define USART_CR1_PEIE		(1 <<  8)
+#define USART_CR1_TXEIE		(1 <<  7)
+#define USART_CR1_TCIE		(1 <<  6)
+#define USART_CR1_RXNEIE	(1 <<  5)
+#define USART_CR1_IDLEIE	(1 <<  4)
+#define USART_CR1_TE		(1 <<  3)
+#define USART_CR1_RE		(1 <<  2)
+#define USART_CR1_RWU		(1 <<  1)
+#define USART_CR1_SBK		(1 <<  0)
+
+#define USART_CR3_CTSE		(1 <<  9)
+#define USART_CR3_RTSE		(1 <<  8)
+#define USART_CR3_SCEN		(1 <<  5)
+#define USART_CR3_NACK		(1 <<  4)
--- a/contrib/usart-impl.h
+++ b/contrib/usart-impl.h
@@ -0,0 +1,25 @@
+struct usart {
+  struct USART *USART;
+  struct chx_intr *intr;
+  uint8_t irq_num;
+  struct usart_stat *stat;
+  struct rb *rb_a2h;
+  struct rb *rb_h2a;
+  uint8_t *buf_a2h;
+  uint8_t *buf_h2a;
+  chopstx_poll_cond_t *app_write_event;
+  int *tx_ready;
+};
+
+
+static int handle_intr (struct USART *USARTx, struct rb *rb2a, struct usart_stat *stat);
+static int handle_tx (struct USART *USARTx, struct rb *rb2h, struct usart_stat *stat);
+static void usart_config_recv_enable (struct USART *USARTx, int on);
+
+struct brr_setting {
+  uint8_t baud_spec;
+  uint32_t brr_value;
+};
+#define NUM_BAUD (int)(sizeof (brr_table) / sizeof (struct brr_setting))
+
+#define NUM_USART ((int)(sizeof (usart_array) / sizeof (struct usart)))
--- a/contrib/usart-stm32f103.c
+++ b/contrib/usart-stm32f103.c
@@ -31,56 +31,14 @@
 #include <chopstx.h>
 #include <mcu/stm32.h>
 #include <contrib/usart.h>
-
-/* Hardware registers */
-struct USART {
-  volatile uint32_t SR;
-  volatile uint32_t DR;
-  volatile uint32_t BRR;
-  volatile uint32_t CR1;
-  volatile uint32_t CR2;
-  volatile uint32_t CR3;
-  volatile uint32_t GTPR;
-};
+#include <contrib/usart-impl.h>
+#include <contrib/usart-impl-f103.h>

 #define USART2_BASE           (APB1PERIPH_BASE + 0x4400)
 #define USART3_BASE           (APB1PERIPH_BASE + 0x4800)
 #define USART2 ((struct USART *)USART2_BASE)
 #define USART3 ((struct USART *)USART3_BASE)

-#define USART_SR_CTS	(1 << 9)
-#define USART_SR_LBD	(1 << 8)
-#define USART_SR_TXE	(1 << 7)
-#define USART_SR_TC	(1 << 6)
-#define USART_SR_RXNE	(1 << 5)
-#define USART_SR_IDLE	(1 << 4)
-#define USART_SR_ORE	(1 << 3)
-#define USART_SR_NE	(1 << 2)
-#define USART_SR_FE	(1 << 1)
-#define USART_SR_PE	(1 << 0)
-
-
-#define USART_CR1_UE		(1 << 13)
-#define USART_CR1_M		(1 << 12)
-#define USART_CR1_WAKE		(1 << 11)
-#define USART_CR1_PCE		(1 << 10)
-#define USART_CR1_PS		(1 <<  9)
-#define USART_CR1_PEIE		(1 <<  8)
-#define USART_CR1_TXEIE		(1 <<  7)
-#define USART_CR1_TCIE		(1 <<  6)
-#define USART_CR1_RXNEIE	(1 <<  5)
-#define USART_CR1_IDLEIE	(1 <<  4)
-#define USART_CR1_TE		(1 <<  3)
-#define USART_CR1_RE		(1 <<  2)
-#define USART_CR1_RWU		(1 <<  1)
-#define USART_CR1_SBK		(1 <<  0)
-
-#define USART_CR3_CTSE		(1 <<  9)
-#define USART_CR3_RTSE		(1 <<  8)
-#define USART_CR3_SCEN		(1 <<  5)
-#define USART_CR3_NACK		(1 <<  4)
-
-
 static struct usart_stat usart2_stat;
 static struct usart_stat usart3_stat;

@@ -112,20 +70,6 @@ static int usart3_tx_ready;
 #define USART_DEVNO_START 2
 #define USART_DEVNO_END 3

-struct usart {
-  struct USART *USART;
-  struct chx_intr *intr;
-  uint8_t irq_num;
-  struct usart_stat *stat;
-  struct rb *rb_a2h;
-  struct rb *rb_h2a;
-  uint8_t *buf_a2h;
-  uint8_t *buf_h2a;
-  chopstx_poll_cond_t *app_write_event;
-  int *tx_ready;
-};
-
-
 static const struct usart usart_array[] =
  {
   { USART2, &usart2_intr, INTR_REQ_USART2,
@@ -135,17 +79,6 @@ static const struct usart usart_array[] =
     &usart3_stat, &usart3_rb_a2h, &usart3_rb_h2a, buf_usart3_rb_a2h,
     buf_usart3_rb_h2a, &usart3_app_write_event, &usart3_tx_ready },
  };
-#define NUM_USART ((int)(sizeof (usart_array) / sizeof (struct usart)))
-
-static int handle_intr (struct USART *USARTx, struct rb *rb2a, struct usart_stat *stat);
-static int handle_tx (struct USART *USARTx, struct rb *rb2h, struct usart_stat *stat);
-static void usart_config_recv_enable (struct USART *USARTx, int on);
-
-struct brr_setting {
-  uint8_t baud_spec;
-  uint32_t brr_value;
-};
-#define NUM_BAUD (int)(sizeof (brr_table) / sizeof (struct brr_setting))

 /* We assume 36MHz f_PCLK */
 static const struct brr_setting brr_table[] = {
@@ -169,393 +102,14 @@ static const struct brr_setting brr_table[] = {
 };

 #include "usart-common.c"
-
+
 static void
-usart_config_recv_enable (struct USART *USARTx, int on)
+usart_rcc_setup (void)
 {
-  if (on)
-    USARTx->CR1 |= USART_CR1_RE;
-  else
-    USARTx->CR1 &= ~USART_CR1_RE;
-}
-
-
-int
-usart_config (uint8_t dev_no, uint32_t config_bits)
-{
-  struct USART *USARTx = get_usart_dev (dev_no);
-  uint8_t baud_spec = (config_bits & MASK_BAUD);
-  int i;
-  uint32_t cr1_config = (USART_CR1_UE | USART_CR1_RXNEIE | USART_CR1_TE);
-				/* TXEIE/TCIE will be enabled when
-				   putting char */
-				/* No CTSIE, PEIE, IDLEIE, LBDIE */
-  if (USARTx == NULL)
-    return -1;
-
-  /* Disable USART before configure.  */
-  USARTx->CR1 &= ~USART_CR1_UE;
-
-  if (((config_bits & MASK_CS) == CS7 && (config_bits & PARENB))
-      || ((config_bits & MASK_CS) == CS8 && (config_bits & PARENB) == 0))
-    cr1_config &= ~USART_CR1_M;
-  else if ((config_bits & MASK_CS) == CS8)
-    cr1_config |=  USART_CR1_M;
-  else
-    return -1;
-
-  if ((config_bits & PARENB) == 0)
-    cr1_config &= ~(USART_CR1_PCE | USART_CR1_PEIE);
-  else
-    cr1_config |=  (USART_CR1_PCE | USART_CR1_PEIE);
-
-  if ((config_bits & PARODD) == 0)
-    cr1_config &= ~USART_CR1_PS;
-  else
-    cr1_config |=  USART_CR1_PS;
-
-  if ((config_bits & MASK_STOP) == STOP0B5)
-    USARTx->CR2 = (0x1 << 12);
-  else if ((config_bits & MASK_STOP) == STOP1B)
-    USARTx->CR2 = (0x0 << 12);
-  else if ((config_bits & MASK_STOP) == STOP1B5)
-    USARTx->CR2 = (0x3 << 12);
-  else /* if ((config_bits & MASK_STOP) == STOP2B) */
-    USARTx->CR2 = (0x2 << 12);
-
-  for (i = 0; i < NUM_BAUD; i++)
-    if (brr_table[i].baud_spec == baud_spec)
-      break;
-
-  if (i >= NUM_BAUD)
-    return -1;
-
-  USARTx->BRR = brr_table[i].brr_value;
-
-  if ((config_bits & MASK_FLOW))
-    USARTx->CR3 = USART_CR3_CTSE | USART_CR3_RTSE;
-  else
-    USARTx->CR3 = 0;
-
-  if (!(config_bits & MASK_MODE))
-    cr1_config |= USART_CR1_RE;
-
-  USARTx->CR1 = cr1_config;
-
-  /* SCEN (smartcard enable) should be set _after_ CR1.  */
-  if ((config_bits & MASK_MODE))
-    {
-      if ((config_bits & MASK_MODE) == MODE_SMARTCARD)
-	{
-	  USARTx->GTPR = (1 << 8) | 5;
-	  USARTx->CR3 |= (USART_CR3_SCEN | USART_CR3_NACK);
-	}
-      else if ((config_bits & MASK_MODE) == MODE_IRDA)
-	USARTx->CR3 |= (1 << 1);
-      else if ((config_bits & MASK_MODE) == MODE_IRDA_LP)
-	USARTx->CR3 |= (1 << 2) | (1 << 1);
-    }
-
-  return 0;
-}
-
-
-void
-usart_init0 (int (*cb) (uint8_t dev_no, uint16_t notify_bits))
-{
-  int i;
-
-  ss_notify_callback = cb;
-
-  for (i = 0; i < NUM_USART; i++)
-    {
-      if (usart_array[i].stat)
-	usart_array[i].stat->dev_no = i + USART_DEVNO_START;
-      chopstx_claim_irq (usart_array[i].intr, usart_array[i].irq_num);
-    }
-
  /* Enable USART2 and USART3 clocks, and strobe reset.  */
  RCC->APB1ENR |= ((1 << 18) | (1 << 17));
  RCC->APB1RSTR = ((1 << 18) | (1 << 17));
  RCC->APB1RSTR = 0;
 }
-
-#define UART_STATE_BITMAP_RX_CARRIER (1 << 0)
-#define UART_STATE_BITMAP_TX_CARRIER (1 << 1)
-#define UART_STATE_BITMAP_BREAK      (1 << 2)
-#define UART_STATE_BITMAP_RINGSIGNAL (1 << 3)
-#define UART_STATE_BITMAP_FRAMING    (1 << 4)
-#define UART_STATE_BITMAP_PARITY     (1 << 5)
-#define UART_STATE_BITMAP_OVERRUN    (1 << 6)

-static int
-handle_intr (struct USART *USARTx, struct rb *rb2a, struct usart_stat *stat)
-{
-  int tx_ready = 0;
-  uint32_t r = USARTx->SR;
-  int notify_bits = 0;
-  int smartcard_mode = ((USARTx->CR3 & USART_CR3_SCEN) != 0);
-
-  if (smartcard_mode)
-    {
-      if ((r & USART_SR_TC))
-	{
-	  tx_ready = 1;
-	  USARTx->CR1 &= ~USART_CR1_TCIE;
-	}
-    }
-  else
-    {
-      if ((r & USART_SR_TXE))
-	{
-	  tx_ready = 1;
-	  USARTx->CR1 &= ~USART_CR1_TXEIE;
-	}
-    }
-
-  if ((r & USART_SR_RXNE))
-    {
-      uint32_t data = USARTx->DR;
-
-      /* DR register should be accessed even if data is not used.
-       * Its read-access has side effect of clearing error flags.
-       */
-      asm volatile ("" : : "r" (data) : "memory");
-
-      if ((r & USART_SR_NE))
-	stat->err_rx_noise++;
-      else if ((r & USART_SR_FE))
-	{
-	  /* NOTE: Noway to distinguish framing error and break  */
-
-	  stat->rx_break++;
-	  notify_bits |= UART_STATE_BITMAP_BREAK;
-	}
-      else if ((r & USART_SR_PE))
-	{
-	  stat->err_rx_parity++;
-	  notify_bits |= UART_STATE_BITMAP_PARITY;
-	}
-      else
-	{
-	  if ((r & USART_SR_ORE))
-	    {
-	      stat->err_rx_overrun++;
-	      notify_bits |= UART_STATE_BITMAP_OVERRUN;
-	    }
-
-	  /* XXX: if CS is 7-bit, mask it, or else parity bit in upper layer */
-	  if (rb_ll_put (rb2a, (data & 0xff)) < 0)
-	    stat->err_rx_overflow++;
-	  else
-	    stat->rx++;
-	}
-    }
-  else if ((r & USART_SR_ORE))
-    {				/* Clear ORE */
-      uint32_t data = USARTx->DR;
-      asm volatile ("" : : "r" (data) : "memory");
-      stat->err_rx_overrun++;
-      notify_bits |= UART_STATE_BITMAP_OVERRUN;
-    }
-
-  if (notify_bits)
-    {
-      if (ss_notify_callback
-	  && (*ss_notify_callback) (stat->dev_no, notify_bits))
-	stat->err_notify_overflow++;
-    }
-
-  return tx_ready;
-}
-
-static int
-handle_tx (struct USART *USARTx, struct rb *rb2h, struct usart_stat *stat)
-{
-  int tx_ready = 1;
-  int c = rb_ll_get (rb2h);
-
-  if (c >= 0)
-    {
-      uint32_t r;
-      int smartcard_mode = ((USARTx->CR3 & USART_CR3_SCEN) != 0);
-
-      USARTx->DR = (c & 0xff);
-      stat->tx++;
-      r = USARTx->SR;
-      if (smartcard_mode)
-	{
-	  if ((r & USART_SR_TC) == 0)
-	    {
-	      tx_ready = 0;
-	      USARTx->CR1 |= USART_CR1_TCIE;
-	    }
-	}
-      else
-	{
-	  if ((r & USART_SR_TXE) == 0)
-	    {
-	      tx_ready = 0;
-	      USARTx->CR1 |= USART_CR1_TXEIE;
-	    }
-	}
-    }
-
-  return tx_ready;
-}
-
-int
-usart_send_break (uint8_t dev_no)
-{
-  struct USART *USARTx = get_usart_dev (dev_no);
-  if (USARTx == NULL)
-    return -1;
-
-  if ((USARTx->CR1 & 0x01))
-    return 1;	/* Busy sending break, which was requested before.  */
-
-  USARTx->CR1 |= 0x01;
-  return 0;
-}
-
-int
-usart_block_sendrecv (uint8_t dev_no, const char *s_buf, uint16_t s_buflen,
-		      char *r_buf, uint16_t r_buflen,
-		      uint32_t *timeout_block_p, uint32_t timeout_char)
-{
-  uint32_t timeout;
-  uint8_t *p;
-  int len;
-  uint32_t r;
-  uint32_t data;
-  struct USART *USARTx = get_usart_dev (dev_no);
-  int smartcard_mode = ((USARTx->CR3 & USART_CR3_SCEN) != 0);
-  struct chx_intr *usartx_intr = get_usart_intr (dev_no);
-  struct chx_poll_head *ph[1];
-
-  if (usartx_intr == NULL)
-    return -1;
-
-  ph[0] = (struct chx_poll_head *)usartx_intr;
-
-  p = (uint8_t *)s_buf;
-  if (p)
-    {
-      if (smartcard_mode)
-	usart_config_recv_enable (USARTx, 0);
-
-      USARTx->CR1 |= USART_CR1_TXEIE;
-
-      /* Sending part */
-      while (1)
-	{
-	  chopstx_poll (NULL, 1, ph);
-
-	  r = USARTx->SR;
-
-	  /* Here, ignore recv error(s).  */
-	  if ((r & USART_SR_RXNE) || (r & USART_SR_ORE))
-	    {
-	      data = USARTx->DR;
-	      asm volatile ("" : : "r" (data) : "memory");
-	    }
-
-	  if ((r & USART_SR_TXE))
-	    {
-	      if (s_buflen == 0)
-		break;
-	      else
-		{
-		  /* Keep TXEIE bit */
-		  USARTx->DR = *p++;
-		  s_buflen--;
-		}
-	    }
-
-	  chopstx_intr_done (usartx_intr);
-	}
-
-      USARTx->CR1 &= ~USART_CR1_TXEIE;
-      if (smartcard_mode)
-	{
-	  if (timeout_block_p && (*timeout_block_p))
-	    do
-	      r = USARTx->SR;
-	    while (((r & USART_SR_TC) == 0));
-
-	  usart_config_recv_enable (USARTx, 1);
-
-	  if (timeout_block_p && *timeout_block_p == 0)
-	    {
-	      /* Ignoring the echo back.  */
-	      do
-		r = USARTx->SR;
-	      while (((r & USART_SR_TC) == 0));
-
-	      if ((r & USART_SR_RXNE))
-		{
-		  data = USARTx->DR;
-		  asm volatile ("" : : "r" (data) : "memory");
-		}
-
-	      *timeout_block_p = timeout_char;
-	    }
-	}
-
-      chopstx_intr_done (usartx_intr);
-    }
-
-  if (r_buf == NULL)
-    return 0;
-
-  if (!p)
-    if (smartcard_mode)
-      usart_config_recv_enable (USARTx, 1);
-
-  /* Receiving part */
-  r = chopstx_poll (timeout_block_p, 1, ph);
-  if (r == 0)
-    return 0;
-
-  p = (uint8_t *)r_buf;
-  len = 0;
-
-  while (1)
-    {
-      r = USARTx->SR;
-
-      data = USARTx->DR;
-      asm volatile ("" : : "r" (data) : "memory");
-
-      if ((r & USART_SR_RXNE))
-	{
-	  if ((r & USART_SR_NE) || (r & USART_SR_FE) || (r & USART_SR_PE))
-	    /* ignore error, for now.  XXX: ss_notify */
-	    ;
-	  else
-	    {
-	      *p++ = (data & 0xff);
-	      len++;
-	      r_buflen--;
-	      if (r_buflen == 0)
-		{
-		  chopstx_intr_done (usartx_intr);
-		  break;
-		}
-	    }
-	}
-      else if ((r & USART_SR_ORE))
-	{
-	  data = USARTx->DR;
-	  asm volatile ("" : : "r" (data) : "memory");
-	}
-
-      chopstx_intr_done (usartx_intr);
-      timeout = timeout_char;
-      r = chopstx_poll (&timeout, 1, ph);
-      if (r == 0)
-	break;
-    }
-
-  return len;
-}
+#include "usart-common-f103.c"
--- a/contrib/usart-stm32l4.c
+++ b/contrib/usart-stm32l4.c
@@ -3,7 +3,7 @@
 #include <chopstx.h>
 #include <mcu/stm32l.h>
 #include <contrib/usart.h>
-
+#include <contrib/usart-impl.h>

 #define RCC_APB1_1_USART2     (1 << 17)
 #define RCC_APB2_USART1       (1 << 14)
@@ -84,20 +84,6 @@ static int usart2_tx_ready;
 #define USART_DEVNO_START 1
 #define USART_DEVNO_END   2

-struct usart {
-  struct USART *USART;
-  struct chx_intr *intr;
-  uint8_t irq_num;
-  struct usart_stat *stat;
-  struct rb *rb_a2h;
-  struct rb *rb_h2a;
-  uint8_t *buf_a2h;
-  uint8_t *buf_h2a;
-  chopstx_poll_cond_t *app_write_event;
-  int *tx_ready;
-};
-
-
 static const struct usart usart_array[] =
  {
   { USART1, &usart1_intr, INTR_REQ_USART1,
@@ -109,17 +95,6 @@ static const struct usart usart_array[] =
     buf_usart2_rb_h2a, &usart2_app_write_event, &usart2_tx_ready,
   },
  };
-#define NUM_USART ((int)(sizeof (usart_array) / sizeof (struct usart)))
-
-static int handle_intr (struct USART *USARTx, struct rb *rb2a, struct usart_stat *stat);
-static int handle_tx (struct USART *USARTx, struct rb *rb2h, struct usart_stat *stat);
-static void usart_config_recv_enable (struct USART *USARTx, int on);
-
-struct brr_setting {
-  uint8_t baud_spec;
-  uint32_t brr_value;
-};
-#define NUM_BAUD (int)(sizeof (brr_table) / sizeof (struct brr_setting))

 /* We assume 40MHz f_CK */
 static const struct brr_setting brr_table[] = {
--- a/doc/chopstx-api.texi
+++ b/doc/chopstx-api.texi
@@ -230,3 +230,10 @@ clock.
 Return previous value of @var{enable_sleep}.
@end deftypefun

+@subheading chopstx_critical
+@anchor{chopstx_critical}
+@deftypefun {void *} {chopstx_critical} (void *func (void * @var{})
+Run the function @var{func} with @var{arg} under CPU schedule lock.
+Return void * pointer.
+@end deftypefun
+
--- a/doc/chopstx.texi
+++ b/doc/chopstx.texi
@@ -1,7 +1,7 @@
 \input texinfo                      @c -*-texinfo-*-
@c %**start of header
@setfilename chopstx.info
-@set VERSION 1.17
+@set VERSION 2.2
@settitle Chopstx Reference Manual
@c Unify some of the indices.
@syncodeindex tp fn
@@ -11,7 +11,7 @@
 This manual is for Chopstx (version @value{VERSION}).

@noindent
-Copyright @copyright{} 2013, 2015, 2016, 2017, 2018, 2019 Flying Stone Technology @*
+Copyright @copyright{} 2013, 2015, 2016, 2017, 2018, 2019, 2020, 2021 Flying Stone Technology @*

@quotation
 Permission is granted to copy, distribute and/or modify this document
@@ -89,9 +89,10 @@ Indexes
@chapter Introduction

 Chopstx is an RT thread library for ARM Cortex-M0, Cortex-M0plus,
-Cortex-M3, Cortex-M4 with no FPU or DSP, and GNU/Linux emulation.
-Specifically, it is used for STM32F030, MKL27Z, STM32F103, GD32F103,
-STM32L432 and as a command on GNU/Linux.
+Cortex-M3, Cortex-M4 with no FPU or DSP, RISC-V Bumblebee, and
+GNU/Linux emulation.  Specifically, it is used for STM32F030, MKL27Z,
+STM32F103, GD32F103, STM32L432, GD32VF103 and as a command on
+GNU/Linux.

 While most RTOSes come with many features, drivers, and stacks,
 Chopstx just offers an RT thread library.
@@ -125,7 +126,7 @@ done by interrupt handler, bottom half, and thead is crucial for
 applications' performance.  And because the demarcation should be done
 at an early stage of an application development, it has a tendency,
 many parts are getting demanding higher priority.  Amount of code for
-higher priority interrupt hander is getting bigger and bigger, while
+higher priority interrupt handler is getting bigger and bigger, while
 losing performance.

 On the other hand, ``Threads (and only Threads)'' programming style
@@ -238,7 +239,7 @@ chx_handle_intr entries.
 Obviously, this is suboptimal.  It kills the hardware effort to
 decrease interrupt latency.

-I is certainly possible to support configurable vector table and/or
+It is certainly possible to support configurable vector table and/or
 better dispatch.

 The reason why I keep this badness is that I believe that when
--- a/entry-cortex-m.c
+++ b/entry-cortex-m.c
@@ -1,7 +1,7 @@
 /*
- * entry.c - Entry routine when reset and interrupt vectors.
+ * entry-cortex-m.c - Entry routine when reset and interrupt vectors.
 *
- * Copyright (C) 2013, 2014, 2015, 2016, 2017, 2019
+ * Copyright (C) 2013, 2014, 2015, 2016, 2017, 2019, 2021
 *               Flying Stone Technology
 * Author: NIIBE Yutaka <gniibe@fsij.org>
 *
@@ -64,8 +64,7 @@ extern uint8_t __main_stack_end__;
 #if defined(__ARM_ARCH_7M__) || defined(__ARM_ARCH_7EM__)
 extern void svc (void);
 #endif
-extern void preempt (void);
-extern void chx_timer_expired (void);
+
 extern void chx_handle_intr (void);

 static void nmi (void)
@@ -114,7 +113,7 @@ entry (void)
 {
  asm volatile ("bl	clock_init\n\t"
 		/* Clear BSS section.  */
-		"mov	r0, #0\n\t"
+		"movs	r0, #0\n\t"
 		"ldr	r1, =_bss_start\n\t"
 		"ldr	r2, =_bss_end\n"
 	"0:\n\t"
@@ -122,7 +121,7 @@ entry (void)
 		"beq	1f\n\t"
 #if defined(__ARM_ARCH_6M__)
 		"str	r0, [r1]\n\t"
-		"add	r1, #4\n\t"
+		"adds	r1, #4\n\t"
 #else
 		"str	r0, [r1], #4\n\t"
 #endif
@@ -138,8 +137,8 @@ entry (void)
 #if defined(__ARM_ARCH_6M__)
 		"ldr	r0, [r3]\n\t"
 		"str	r0, [r1]\n\t"
-		"add	r3, #4\n\t"
-		"add	r1, #4\n\t"
+		"adds	r3, #4\n\t"
+		"adds	r1, #4\n\t"
 #else
 		"ldr	r0, [r3], #4\n\t"
 		"str	r0, [r1], #4\n\t"
@@ -148,9 +147,9 @@ entry (void)
 	"3:\n\t"
 		/* Switch to PSP.  */
 		"ldr	r0, =__process0_stack_end__\n\t"
-		COMPOSE_STATEMENT ("sub	r0, #", CHOPSTX_THREAD_SIZE, "\n\t")
+		COMPOSE_STATEMENT ("subs	r0, #", CHOPSTX_THREAD_SIZE, "\n\t")
 		"msr	PSP, r0\n\t" /* Process (main routine) stack.  */
-		"mov	r1, #2\n\t"
+		"movs	r1, #2\n\t"
 		"msr	CONTROL, r1\n\t"
 		"isb\n\t"
 		"bl	chx_init\n\t"
@@ -158,7 +157,7 @@ entry (void)
 		"bl	gpio_init\n\t"
 		/* Enable interrupts.  */
 #if defined(__ARM_ARCH_7M__) || defined(__ARM_ARCH_7EM__)
-		"mov	r0, #0\n\t"
+		"movs	r0, #0\n\t"
 		"msr	BASEPRI, r0\n\t"
 #endif
 		"cpsie	i\n\t"
@@ -192,8 +191,8 @@ handler vector_table[] __attribute__ ((section(".startup.vectors"))) = {
 #endif  
  none,				/* Debug */
  none,				/* reserved */
-  preempt,			/* PendSV */
-  chx_timer_expired,		/* SysTick */
+  none,				/* PendSV */
+  chx_handle_intr,		/* SysTick */
  /* 0x40 */
  chx_handle_intr /* WWDG */,      chx_handle_intr /* PVD */,
  chx_handle_intr /* TAMPER */,    chx_handle_intr /* RTC */,
--- a/entry-riscv32.c
+++ b/entry-riscv32.c
@@ -0,0 +1,84 @@
+/*
+ * entry-riscv32.c - Entry routine when reset.
+ *
+ * Copyright (C) 2019
+ *               Flying Stone Technology
+ * Author: NIIBE Yutaka <gniibe@fsij.org>
+ *
+ * This file is a part of Chopstx, a thread library for embedded.
+ *
+ * Chopstx is free software: you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 3 of the License, or
+ * (at your option) any later version.
+ *
+ * Chopstx is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
+ * General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ *
+ * As additional permission under GNU GPL version 3 section 7, you may
+ * distribute non-source form of the Program without the copy of the
+ * GNU GPL normally required by section 4, provided you inform the
+ * recipients of GNU GPL by a written offer.
+ *
+ */
+
+#include "board.h"
+#include "mcu/clk_gpio_init-gd32vf103.c"
+
+/*
+ * Startup entry point.
+ */
+void __attribute__ ((naked,section(".text.startup.0")))
+entry (void)
+{
+  /* Start at 0x00000000 (alias 0x08000000), interrupt masked */
+  asm volatile (
+	"li	a0,0x0800000c\n\t"
+        "jr	a0\n\t"		/* Jump to physical address */
+        ".align	2\n\t"
+    ".option push\n"
+    ".option norelax\n\t"
+	"la	gp,__global_pointer$\n"
+    ".option pop\n\t"
+	"la	sp,__main_stack_end__\n\t"
+	"call	clock_init\n\t"
+	/* Clear BSS section.  */
+	"la	a0,_bss_start\n\t"
+	"la	a1,_bss_end\n\t"
+    "0:\n\t"
+	"beq	a0,a1,1f\n"
+	"sw	zero,(a0)\n\t"
+	"addi	a0,a0,4\n\t"
+	"j	0b\n"
+    "1:\n\t"
+	/* Copy data section.  */
+	"la	a0,_textdata\n\t"
+	"la	a1,_data\n\t"
+	"la	a2,_edata\n"
+    "0:\n\t"
+	"beq	a1,a2,1f\n\t"
+	"lw	t0,(a0)\n\t"
+	"sw	t0,(a1)\n\t"
+	"addi	a0,a0,4\n\t"
+	"addi	a1,a1,4\n\t"
+	"j	0b\n"
+    "1:\n\t"
+	/* Switch to application stack.  */
+	"la	sp,__process0_stack_end__-160\n\t"
+	"mv	a0,sp\n\t"
+	"call	chx_init\n\t"
+	"call	chx_systick_init\n\t"
+	"call	gpio_init\n\t"
+	/* Enable interrupts.  */
+	"csrsi	mstatus,8\n\t"
+	/* Call main.  */
+	"call	main\n\t"
+    "3:\n\t"
+	"j	3b"
+	: /* no output */ : /* no input */ : "memory");
+}
--- a/example-cdc-gnu-linux/Makefile
+++ b/example-cdc-gnu-linux/Makefile
@@ -8,6 +8,7 @@ CHOPSTX = ..
 LDSCRIPT=
 CSRC = sample.c usb-cdc.c command.c

+ARCH=gnu-linux
 CHIP=gnu-linux
 USE_SYS = yes
 USE_USB = yes
--- a/example-cdc-gnu-linux/sample.c
+++ b/example-cdc-gnu-linux/sample.c
@@ -179,7 +179,14 @@ main (int argc, const char *argv[])
 	      if (size < 0)
 		goto connection_loop;

-	      if (size == 1)
+	      if (size == 0)
+		/* Timeout */
+		{
+		  if (tty_send (tty, "\r\n", 2) < 0)
+		    return 0;
+		  break;
+		}
+	      else if (size == 1)
 		/* Do nothing but prompt again.  */
 		break;
 	      else if (size)
--- a/example-cdc-gnu-linux/usb-cdc.c
+++ b/example-cdc-gnu-linux/usb-cdc.c
@@ -768,7 +768,7 @@ tty_main (void *arg)
 	  && t->flag_send_ready)
 	{
 	  uint8_t line[32];
-	  int len = get_chars_from_ringbuffer (t, line, sizeof (len));
+	  int len = get_chars_from_ringbuffer (t, line, sizeof (line));

 	  if (len)
 	    {
@@ -904,8 +904,18 @@ tty_recv (struct tty *t, char *buf, uint32_t *timeout)
      chopstx_mutex_lock (&t->mtx);
      r = check_rx (t);
      chopstx_mutex_unlock (&t->mtx);
-      if (r || (timeout != NULL && *timeout == 0))
+      if (r)
 	break;
+      else if (timeout != NULL && *timeout == 0)
+	{
+	  int i;
+
+	  /* Cancel the input.	*/
+	  for (i = 0; i < t->inputline_len; i++)
+	    tty_send (t, "\x08\x20\x08", 3);
+	  t->inputline_len = 0;
+	  break;
+	}
    }

  chopstx_mutex_lock (&t->mtx);
--- a/example-cdc/Makefile
+++ b/example-cdc/Makefile
@@ -6,6 +6,7 @@ CHOPSTX = ..
 LDSCRIPT= sample.ld.m4
 CSRC = sample.c usb-cdc.c

+ARCH=cortex-m
 CHIP=stm32l4

 USE_SYS = yes
--- a/example-cdc/usb-cdc.c
+++ b/example-cdc/usb-cdc.c
@@ -780,7 +780,7 @@ tty_main (void *arg)
 	  && t->flag_send_ready)
 	{
 	  uint8_t line[32];
-	  int len = get_chars_from_ringbuffer (t, line, sizeof (len));
+	  int len = get_chars_from_ringbuffer (t, line, sizeof (line));

 	  if (len)
 	    {
--- a/example-fraucheky/Makefile
+++ b/example-fraucheky/Makefile
@@ -8,6 +8,7 @@ FRAUCHEKY = ../../fraucheky
 LDSCRIPT=

 CSRC = main.c
+ARCH=gnu-linux
 CHIP=gnu-linux
 USE_SYS = yes
 USE_USB = yes
--- a/example-fs-bb48/Makefile
+++ b/example-fs-bb48/Makefile
@@ -7,6 +7,7 @@ PROJECT = sample
 CHOPSTX = ..
 LDSCRIPT= sample.ld
 CSRC = sample.c usb-cdc.c command.c touch.c
+ARCH=cortex-m
 CHIP=mkl27z

 USE_SYS = yes
--- a/example-fs-bb48/usb-cdc.c
+++ b/example-fs-bb48/usb-cdc.c
@@ -768,7 +768,7 @@ tty_main (void *arg)
 	  && t->flag_send_ready)
 	{
 	  uint8_t line[32];
-	  int len = get_chars_from_ringbuffer (t, line, sizeof (len));
+	  int len = get_chars_from_ringbuffer (t, line, sizeof (line));

 	  if (len)
 	    {
--- a/example-fsm-55/Makefile
+++ b/example-fsm-55/Makefile
@@ -7,6 +7,7 @@ LDSCRIPT= hacker-emblem.ld

 CSRC = reset.c hh.c

+ARCH=cortex-m
 CHIP=stm32f0

 # Hacker Emblem and "Happy Hacking!" demonstration
--- a/example-fsm-55/reset.c
+++ b/example-fsm-55/reset.c
@@ -1,7 +1,7 @@
 /*
 * reset.c - No system routines, but only RESET handler for STM32F030.
 *
- * Copyright (C) 2015 Flying Stone Technology
+ * Copyright (C) 2015, 2021 Flying Stone Technology
 * Author: NIIBE Yutaka <gniibe@fsij.org>
 *
 * Copying and distribution of this file, with or without modification,
@@ -19,10 +19,10 @@ reset (void)
 {
  asm volatile ("cpsid	i\n\t"		/* Mask all interrupts. */
 		"mov	r0, pc\n\t"	/* r0 = PC & ~0x0fff */
-		"mov	r1, #0x10\n\t"
-		"lsl	r1, #8\n\t"
-		"sub	r1, r1, #1\n\t"
-		"bic	r0, r0, r1\n\t"
+		"movs	r1, #0x10\n\t"
+		"lsls	r1, #8\n\t"
+		"subs	r1, #1\n\t"
+		"bics	r0, r0, r1\n\t"
 		"ldr	r2, [r0]\n\t"
 		"msr	MSP, r2\n\t"	/* Main (exception handler) stack. */
 		"b	entry\n\t"
@@ -31,8 +31,6 @@ reset (void)
 }

 extern uint8_t __main_stack_end__;
-extern void preempt (void);
-extern void chx_timer_expired (void);
 extern void chx_handle_intr (void);

 static void nmi (void)
@@ -84,8 +82,8 @@ handler vector[] __attribute__ ((section(".vectors"))) = {
  none,				/* SVCall */
  none,				/* Debug */
  none,				/* reserved */
-  preempt,			/* PendSV */
-  chx_timer_expired,		/* SysTick */
+  none,				/* PendSV */
+  chx_handle_intr,		/* SysTick */
  /* 0x40 */
  chx_handle_intr /* WWDG */,     chx_handle_intr /* PVD */,
  chx_handle_intr /* TAMPER */,   chx_handle_intr /* RTC */,
--- a/example-lcd/FSIJ.png
+++ b/example-lcd/FSIJ.png
--- a/example-lcd/Makefile
+++ b/example-lcd/Makefile
@@ -0,0 +1,59 @@
+# Makefile for example application of Chopstx
+
+PROJECT = sample
+
+### Currently, it is for GD32VF103
+###
+### Please change lines started with '###' for STM32 Nucleo L432.
+###
+### Please change lines started with '###' for Cortex-M3 board.
+###
+### Please change lines started with '###' for Cortex-M0+ board
+### (STM32F0 Discovery).
+
+CHOPSTX = ..
+LDSCRIPT= sample.ld.gd32vf103
+### LDSCRIPT= sample.ld.m4
+### LDSCRIPT= sample.ld
+### LDSCRIPT= sample.ld.m3
+CSRC = sample.c usb-vendor-specific.c
+# CSRC += debug.c
+
+ARCH=riscv32
+CHIP=gd32vf103
+### CHIP=stm32l4
+### USE_SYS = yes
+USE_USART = yes
+USE_USB = yes
+
+###################################
+### CROSS = arm-none-eabi-
+CROSS = riscv64-unknown-elf-
+CC   = $(CROSS)gcc
+LD   = $(CROSS)gcc
+OBJCOPY   = $(CROSS)objcopy
+
+### MCU   = cortex-m4
+### MCU   = cortex-m3
+### MCU   = cortex-m0
+CWARN = -Wall -Wextra -Wstrict-prototypes
+DEFS  = -DFREE_STANDING -DMHZ=96
+### DEFS  = -DUSE_SYS3 -DFREE_STANDING -DMHZ=80
+### DEFS  = -DFREE_STANDING -DUSE_SYS3 -DBUSY_LOOP -DCHX_FLAGS_MAIN=CHOPSTX_SCHED_RR
+OPT   = -O3 -Os -g
+LIBS  =
+#LIBS  = -lgcc
+
+CSRC += $(CHOPSTX)/contrib/spi-st.c
+
+####################
+include ../rules.mk
+
+board.h:
+	@echo Please make a symbolic link \'board.h\' to a file in ../board;
+	@exit 1
+
+sys.c: board.h
+
+distclean: clean
+	rm -f board.h
--- a/example-lcd/board.h
+++ b/example-lcd/board.h
@@ -0,0 +1 @@
+../board/board-longan-nano.h
--- a/example-lcd/bouncing_gpg.py
+++ b/example-lcd/bouncing_gpg.py
@@ -0,0 +1,34 @@
+from load_image_to_screen import Longan_LCD
+
+from gnupg_logo_16bit_160x80 import gnupg_logo_16bit_160x80
+
+image = gnupg_logo_16bit_160x80
+
+pos = [ 1, 2, 2, 2, 3, 3, 4, 5, 6, 7, 8, 9, 12, 14, 17, 20, 23, 28, 33, 40, 47, 56  ]
+
+background0 = [ 0x5d, 0xdf ]
+background1 = [ 0x7e, 0xdf ]
+
+def fill(i, bg0, bg1):
+    if (i % 2) == 0:
+        return bg0
+    else:
+        return bg1
+
+def move_right(x, bg0, bg1, img):
+    result = []
+    for i in range(80):
+        for j in range(x):
+            result = result + fill(j, bg0, bg1)
+        result = result + (img[i*160*2:(i+1)*160*2])[0:160*2-x*2]
+    return result
+
+images = [ bytes(move_right(x, background0, background1, image)) for x in pos ]
+
+lcd = Longan_LCD()
+
+for loop in range(10):
+    for i in range(len(pos)):
+        lcd.load_image_to_screen(images[len(pos)-1-i])
+    for i in range(len(pos)):
+        lcd.load_image_to_screen(images[i])
--- a/example-lcd/debug.c
+++ b/example-lcd/debug.c
@@ -0,0 +1,26 @@
+#include <stdint.h>
+#include <stdlib.h>
+#include <chopstx.h>
+#include <contrib/usart.h>
+#include <stdarg.h>
+
+extern int vsnprintf(char *str, size_t size, const char *format, va_list ap);
+
+#define USART_NO 0
+
+/* Intentionally only adding LF */
+void
+debug (const char *fmt, ...)
+{
+  char buf[256];
+  va_list ap;
+  size_t len;
+
+  va_start(ap, fmt);
+  len = vsnprintf (buf, sizeof buf - 1, fmt, ap);
+  va_end(ap);
+  if (len >= sizeof buf - 1)
+    len = sizeof buf - 2;
+  buf[len++] = '\n';
+  usart_write (USART_NO, buf, len);
+}
--- a/example-lcd/debug.h
+++ b/example-lcd/debug.h
@@ -0,0 +1 @@
+void debug (const char *fmt, ...);
--- a/example-lcd/fsij-logo.c
+++ b/example-lcd/fsij-logo.c
--- a/example-lcd/gnupg_logo_16bit_160x80.py
+++ b/example-lcd/gnupg_logo_16bit_160x80.py
--- a/example-lcd/l.py
+++ b/example-lcd/l.py
@@ -0,0 +1,96 @@
+#! /usr/bin/python3
+
+# pos = [
+#   0,  0,  0,  0,  0,  0,  0,  1,  1,  1,  1,  1,  1,  1,  1,  1,  1,  1,  1,  1,
+#   1,  1,  1,  1,  1,  1,  2,  2,  2,  2,  2,  2,  2,  2,  2,  3,  3,  3,  3,  3,
+#   3,  4,  4,  4,  4,  5,  5,  5,  6,  6,  6,  7,  7,  7,  8,  8,  9,  9, 10, 11,
+#  12, 12, 13, 14, 15, 16, 17, 18, 19, 20, 21, 22, 23, 25, 26, 28, 30, 31, 33, 35,
+#  37, 40, 42, 44, 47, 50, 53, 56, 59, 63, 66, 70, 75, 79, 84, 89, 94,100,105,112,
+# 118,125,133,141,149,158
+# ]
+
+pos = [
+  0,  1,  1,  1,
+  1,  2,  2,  3,
+  4,  6,  8,  11,
+ 15, 20, 26, 35,
+ 47, 63, 84, 112,
+149
+]
+
+import usb.core
+import usb.util
+
+dev = usb.core.find(idVendor=0xffff, idProduct=0x0001)
+
+if dev is None:
+    raise ValueError('Device not found')
+
+# dev.set_configuration()
+
+# get an endpoint instance
+cfg = dev.get_active_configuration()
+intf = cfg[(0,0)]
+
+ep_out = usb.util.find_descriptor(
+    intf,
+    # match the first OUT endpoint
+    custom_match = \
+    lambda e: \
+        usb.util.endpoint_direction(e.bEndpointAddress) == \
+        usb.util.ENDPOINT_OUT)
+
+ep_in = usb.util.find_descriptor(
+    intf,
+    # match the first IN endpoint
+    custom_match = \
+    lambda e: \
+        usb.util.endpoint_direction(e.bEndpointAddress) == \
+        usb.util.ENDPOINT_IN)
+
+if ep_out is None:
+    raise ValueError('Endpoint to send data not found')
+
+if ep_in is None:
+    raise ValueError('Endpoint to receive data not found')
+
+color_black = [ 0, 0 ]
+color0 = [ 0xff, 0x03 ]
+color1 = [ 0xef, 0x7f ]
+color2 = [ 0x00, 0x78 ]
+color3 = [ 0xff, 0xff ]
+
+def gen_image(x):
+    image = []
+    for i in range(80):
+        image = image + (color_black * x) + (color0 * (160-x))
+    return image
+
+images = [ gen_image(p) for p in pos ]
+# images = [ gen_image(p) for p in range(160) ]
+
+import time
+import sys
+
+def prepare_send():
+    w=ep_in.read(64)
+    # print(w)
+
+def finish_send():
+    dev.ctrl_transfer(0x41, 0x00, 0x00, 0x00, "")
+    # print(".", end='', flush=True)
+
+for i in range(len(images)*8):
+    i0 = i % (len(images)*2)
+    if i0 < len(images):
+        x = (i % len(images))
+    else:
+        x = len(images)- 1 - (i % len(images))
+    # print("%d %d: %d" % (i, x, len(images[x])))
+    if True:
+        prepare_send()
+        ep_out.write(images[x])
+        finish_send()
+
+prepare_send()
+dev.ctrl_transfer(0x41, 0x00, 0x01, 0x00, "")
--- a/example-lcd/list_565_colors.py
+++ b/example-lcd/list_565_colors.py
@@ -0,0 +1,29 @@
+l = [ 0b00000_000000_00000,
+      0b00000_000000_01111,
+      0b00000_000000_11111,
+      0b00000_011111_00000,
+      0b00000_011111_01111,
+      0b00000_011111_11111,
+      0b00000_111111_00000,
+      0b00000_111111_01111,
+      0b00000_111111_11111,
+      0b01111_000000_00000,
+      0b01111_000000_01111,
+      0b01111_000000_11111,
+      0b01111_011111_00000,
+      0b01111_011111_01111,
+      0b01111_011111_11111,
+      0b01111_111111_00000,
+      0b01111_111111_01111,
+      0b01111_111111_11111,
+      0b11111_000000_00000,
+      0b11111_000000_01111,
+      0b11111_000000_11111,
+      0b11111_011111_00000,
+      0b11111_011111_01111,
+      0b11111_011111_11111,
+      0b11111_111111_00000,
+      0b11111_111111_01111,
+      0b11111_111111_11111 ]
+for color in l:
+    print("0x%04x," % color)
--- a/example-lcd/load_image_to_screen.py
+++ b/example-lcd/load_image_to_screen.py
@@ -0,0 +1,51 @@
+#! /usr/bin/python3
+
+import usb.core
+import usb.util
+import time
+import sys
+
+class Longan_LCD(object):
+    def __init__(self):
+        self.dev = usb.core.find(idVendor=0xffff, idProduct=0x0001)
+
+        if self.dev is None:
+            raise ValueError('Device not found')
+
+        cfg = self.dev.get_active_configuration()
+        intf = cfg[(0,0)]
+
+        self.ep_out = usb.util.find_descriptor(
+            intf,
+            # match the first OUT endpoint
+            custom_match = \
+            lambda e: \
+                usb.util.endpoint_direction(e.bEndpointAddress) == \
+                usb.util.ENDPOINT_OUT)
+
+        self.ep_in = usb.util.find_descriptor(
+            intf,
+            # match the first IN endpoint
+            custom_match = \
+            lambda e: \
+                usb.util.endpoint_direction(e.bEndpointAddress) == \
+                usb.util.ENDPOINT_IN)
+
+        if self.ep_out is None:
+            raise ValueError('Endpoint to send data not found')
+
+        if self.ep_in is None:
+            raise ValueError('Endpoint to receive data not found')
+
+    def prepare_send(self):
+        w=self.ep_in.read(64)
+        # print(w)
+
+    def finish_send(self):
+        self.dev.ctrl_transfer(0x41, 0x00, 0x00, 0x00, "")
+        # print(".", end='', flush=True)
+
+    def load_image_to_screen(self, image):
+        self.prepare_send()
+        self.ep_out.write(image)
+        self.finish_send()
--- a/example-lcd/longan_usb_load_image.py
+++ b/example-lcd/longan_usb_load_image.py
@@ -0,0 +1,93 @@
+#! /usr/bin/python3
+
+import usb.core
+import usb.util
+
+dev = usb.core.find(idVendor=0xffff, idProduct=0x0001)
+
+if dev is None:
+    raise ValueError('Device not found')
+
+# dev.set_configuration()
+
+# get an endpoint instance
+cfg = dev.get_active_configuration()
+intf = cfg[(0,0)]
+
+ep_out = usb.util.find_descriptor(
+    intf,
+    # match the first OUT endpoint
+    custom_match = \
+    lambda e: \
+        usb.util.endpoint_direction(e.bEndpointAddress) == \
+        usb.util.ENDPOINT_OUT)
+
+ep_in = usb.util.find_descriptor(
+    intf,
+    # match the first IN endpoint
+    custom_match = \
+    lambda e: \
+        usb.util.endpoint_direction(e.bEndpointAddress) == \
+        usb.util.ENDPOINT_IN)
+
+if ep_out is None:
+    raise ValueError('Endpoint to send data not found')
+
+if ep_in is None:
+    raise ValueError('Endpoint to receive data not found')
+
+def prepare_send():
+    w=ep_in.read(64)
+    # print(w)
+
+def finish_send():
+    dev.ctrl_transfer(0x41, 0x00, 0x00, 0x00, "")
+    # print(".", end='', flush=True)
+
+
+color0 = [ 0xff, 0x03 ]
+color1 = [ 0xef, 0x7f ]
+color2 = [ 0x00, 0x78 ]
+color3 = [ 0xff, 0xff ]
+
+image = color0*160*80
+# + color1*160*40
+image64 = color0*32
+image = color1*160*80
+point1600a=(color0*40+color1*40)*20
+point1600b=(color1*40+color0*40)*20
+
+point1600c=(color2*20+color3*20)*40
+point1600d=(color3*20+color2*20)*40
+
+import time
+import sys
+
+for i in range(10):
+    prepare_send()
+
+    ep_out.write(point1600a)
+    print(".", end='', flush=True)
+    ep_out.write(point1600b)
+    print(".", end='', flush=True)
+    ep_out.write(point1600a)
+    print(".", end='', flush=True)
+    ep_out.write(point1600b)
+    print(".", end='', flush=True)
+    ep_out.write(point1600a)
+    print(".", end='', flush=True)
+    ep_out.write(point1600b)
+    print(".", end='', flush=True)
+    ep_out.write(point1600a)
+    print(".", end='', flush=True)
+    ep_out.write(point1600b)
+    print(".")
+    finish_send()
+
+    prepare_send()
+    ep_out.write(point1600c*2+point1600d*2+point1600c*2+point1600d*2)
+    print(".")
+    finish_send()
+
+prepare_send()
+dev.ctrl_transfer(0x41, 0x00, 0x01, 0x00, "")
--- a/example-lcd/sample.c
+++ b/example-lcd/sample.c
@@ -0,0 +1,373 @@
+#include <stdint.h>
+#include <stdlib.h>
+#include <chopstx.h>
+
+#include "board.h"
+#include <contrib/spi.h>
+#include <contrib/usart.h>
+
+#include <mcu/gd32vf103.h>
+
+#include "vrsp.h"
+
+void
+set_led_b (void)
+{
+  GPIOA->ODR |= (1 << 1);
+  GPIOA->ODR &= ~(1 << 2);
+  GPIOC->ODR |= (1 << 13);
+}
+
+void
+set_led_g (void)
+{
+  GPIOA->ODR &= ~(1 << 1);
+  GPIOA->ODR |= (1 << 2);
+  GPIOC->ODR |= (1 << 13);
+}
+
+void
+set_led (int on)
+{
+  if (on)
+    GPIOC->ODR &= ~(1 << 13);
+  else
+    GPIOC->ODR |= (1 << 13);
+}
+
+#define STACK_MAIN
+#define STACK_PROCESS_1
+#include "stack-def.h"
+
+#define PRIO_USART     3
+#define STACK_ADDR_USART ((uint32_t)process1_base)
+#define STACK_SIZE_USART (sizeof process1_base)
+
+#define LCD_WIDTH 160
+#define LCD_HEIGHT 80
+
+/*
+ * GPIO PB1: RES#
+ * low active
+ */
+static void
+lcd_reset (int assert)
+{
+  if (assert)
+    GPIOB->ODR &= ~(1 << 1);
+  else
+    GPIOB->ODR |= (1 << 1);
+}
+
+/*
+ * GPIO PB2: CS#
+ * low active
+ */
+static void
+lcd_chip_select (int assert)
+{
+  if (assert)
+    GPIOB->ODR &= ~(1 << 2);
+  else
+    GPIOB->ODR |= (1 << 2);
+}
+
+/*
+ * GPIO PB0: D/C#
+ *    Display: 1
+ *    Command: 0
+ */
+#define LCD_DISPLAY 1
+#define LCD_COMMAND 0
+static void
+lcd_control (int control)
+{
+  if (control == LCD_COMMAND)
+    GPIOB->ODR &= ~(1 << 0);
+  else
+    GPIOB->ODR |= (1 << 0);
+}
+
+
+static void
+lcd_send (uint8_t data)
+{
+  spi_send (data);
+  spi_recv ();
+}
+
+static void
+lcd_data8 (uint8_t data)
+{
+  lcd_send (data);
+}
+
+
+static void
+lcd_data16 (uint16_t data)
+{
+  lcd_send (data>>8);
+  lcd_send (data);
+}
+
+static void
+lcd_command (uint8_t cmd)
+{
+  lcd_control (LCD_COMMAND);
+  lcd_send (cmd);
+  lcd_control (LCD_DISPLAY);
+}
+
+/* LCD: ST7735S */
+
+static void
+lcd_init (void)
+{
+  spi_init ();
+
+  lcd_reset (1);
+  chopstx_usec_wait (500*1000);
+  lcd_reset (0);
+  lcd_chip_select (1);
+  chopstx_usec_wait (100*1000);
+
+  lcd_command (0x11);	/* SLPOUT: Sleep out */
+  chopstx_usec_wait (100*1000);
+
+  lcd_command (0x21);	/* INVON: display inversion on */
+			/* INVOFF: display inversion off: 0x20 */
+
+  lcd_command (0x3a);	/* COLMOD: Pixel data format */
+  lcd_data8 (0x05);     /* 16-bit/pixel */
+
+  lcd_command (0x36);   /* MADCTL: Memory Data Access Control*/
+  lcd_data8 (0x78);
+
+  lcd_command (0xb1);	/* FRMCTR1: frame rate control 1 */
+  lcd_data8 (0x05);
+  lcd_data8 (0x3a);
+  lcd_data8 (0x3a);
+
+  lcd_command (0xb2);	/* FRMCTR2: frame rate control 2 */
+  lcd_data8 (0x05);
+  lcd_data8 (0x3a);
+  lcd_data8 (0x3a);
+
+  lcd_command (0xb3);	/* FRMCTR3: frame rate control 3 */
+  lcd_data8 (0x05);
+  lcd_data8 (0x3a);
+  lcd_data8 (0x3a);
+  lcd_data8 (0x05);
+  lcd_data8 (0x3a);
+  lcd_data8 (0x3a);
+
+  lcd_command (0xb4);   /* INVCTR: inversion control */
+  lcd_data8 (0x03);
+
+  lcd_command (0xc0);   /* PWCTR1: power control 1 */
+  lcd_data8 (0x62);
+  lcd_data8 (0x02);
+  lcd_data8 (0x04);
+
+  lcd_command (0xc1);   /* PWCTR1: power control 2 */
+  lcd_data8 (0xc0);
+
+  lcd_command (0xc2);   /* PWCTR1: power control 3 */
+  lcd_data8 (0x0d);
+  lcd_data8 (0x00);
+
+  lcd_command (0xc3);   /* PWCTR1: power control 4 */
+  lcd_data8 (0x8d);
+  lcd_data8 (0x6a);
+
+  lcd_command (0xc4);   /* PWCTR1: power control 5 */
+  lcd_data8 (0x8d);
+  lcd_data8 (0xee);
+
+  lcd_command (0xc5);   /* VCMCTR1: VCOM control 1 */
+  lcd_data8 (0x0e);
+
+  lcd_command (0xe0);   /* GMCTRP1: Gamma correction setting */
+  lcd_data8 (0x10);
+  lcd_data8 (0x0e);
+  lcd_data8 (0x02);
+  lcd_data8 (0x03);
+  lcd_data8 (0x0e);
+  lcd_data8 (0x07);
+  lcd_data8 (0x02);
+  lcd_data8 (0x07);
+  lcd_data8 (0x0a);
+  lcd_data8 (0x12);
+  lcd_data8 (0x27);
+  lcd_data8 (0x37);
+  lcd_data8 (0x00);
+  lcd_data8 (0x0d);
+  lcd_data8 (0x0e);
+  lcd_data8 (0x10);
+
+  lcd_command (0xe1);   /* GMCTRN1: Gamma correction setting */
+  lcd_data8 (0x10);
+  lcd_data8 (0x0e);
+  lcd_data8 (0x03);
+  lcd_data8 (0x03);
+  lcd_data8 (0x0f);
+  lcd_data8 (0x06);
+  lcd_data8 (0x02);
+  lcd_data8 (0x08);
+  lcd_data8 (0x0a);
+  lcd_data8 (0x13);
+  lcd_data8 (0x26);
+  lcd_data8 (0x36);
+  lcd_data8 (0x00);
+  lcd_data8 (0x0d);
+  lcd_data8 (0x0e);
+  lcd_data8 (0x10);
+
+  /* All set up! Now, turn on the display.  */
+
+  lcd_command (0x29);	/* DISPON: Display On */
+}
+
+static void
+lcd_address (uint16_t x1, uint16_t y1, uint16_t x2, uint16_t y2)
+{
+  lcd_command (0x2a);           /* CASET: Column address */
+  lcd_data16 (x1+1);
+  lcd_data16 (x2+1);
+
+  lcd_command (0x2b);           /* RASET: Row address */
+  lcd_data16 (y1+26);
+  lcd_data16 (y2+26);
+
+  lcd_command (0x2c);           /* RAMWR: memory write */
+}
+
+static void
+lcd_clear (uint16_t color)
+{
+  uint16_t i, j;
+
+  lcd_address (0, 0, LCD_WIDTH-1, LCD_HEIGHT-1);
+  for (i = 0; i < LCD_WIDTH; i++)
+    for (j = 0; j < LCD_HEIGHT; j++)
+      lcd_data16 (color);
+}
+
+static void
+lcd_load_image (const uint16_t *image)
+{
+  int i;
+
+  lcd_address (0, 0, LCD_WIDTH-1, LCD_HEIGHT-1);
+  for(i = 0; i < LCD_WIDTH*LCD_HEIGHT; i++)
+    lcd_data16 (image[i]);
+}
+
+/* Generated with list_565_colors.py */
+static uint16_t colors[27] =
+{
+ 0x0000, 0x000f, 0x001f, 0x03e0, 0x03ef, 0x03ff, 0x07e0, 0x07ef, 0x07ff,
+ 0x7800, 0x780f, 0x781f, 0x7be0, 0x7bef, 0x7bff, 0x7fe0, 0x7fef, 0x7fff,
+ 0xf800, 0xf80f, 0xf81f, 0xfbe0, 0xfbef, 0xfbff, 0xffe0, 0xffef, 0xffff,
+};
+
+static int
+ss_notify (uint8_t dev_no, uint16_t state_bits)
+{
+  (void)dev_no;
+  (void)state_bits;
+  return 0;
+}
+
+uint16_t screen_image[12800];
+
+int
+main (int argc, const char *argv[])
+{
+  chopstx_poll_cond_t usart_poll_desc;
+  chopstx_poll_cond_t usb_poll_desc;
+  struct chx_poll_head *ph[2];
+  uint32_t timeout;
+  int cl = 0;
+  int play_mode = 0;
+  struct vrsp *v;
+  uint32_t u = 0;
+
+  (void)argc;
+  (void)argv;
+
+  usart_init (PRIO_USART, STACK_ADDR_USART, STACK_SIZE_USART, ss_notify);
+  usart_config (0, B115200 | CS8 | STOP1B);
+
+  v = vrsp_open ();
+
+  chopstx_usec_wait (500*1000);
+  set_led (1);
+
+  lcd_init ();
+  lcd_clear (colors[26]);
+
+  chopstx_usec_wait (500*1000);
+
+  vrsp_prepare_poll (v, &usb_poll_desc);
+  ph[0] = (struct chx_poll_head *)&usb_poll_desc;
+
+  usart_read_prepare_poll (0, &usart_poll_desc);
+  ph[1] = (struct chx_poll_head *)&usart_poll_desc;
+
+  timeout = 200*1000*6;
+  while (1)
+    {
+      chopstx_poll (&timeout, 2, ph);
+
+      if (usart_poll_desc.ready)
+	{
+	  char buf[16];
+	  int r;
+	  r = usart_read (0, buf, 16);
+	  if (r)
+	    usart_write (0, buf, r);
+	}
+
+      if (usb_poll_desc.ready)
+	{
+	  int r;
+
+	  r = vrsp_screen_acquire (v);
+	  if (r < 0)
+	    /* It's busy.  */
+	    ;
+	  else if (r == 0)
+	    {
+	      play_mode = 1;
+	      lcd_load_image (screen_image);
+	      vrsp_screen_release (v);
+	    }
+	  else
+	    {
+	      play_mode = 0;
+	      vrsp_screen_release (v);
+	    }
+	}
+
+      if (timeout == 0)
+	{
+	  usart_write (0, "Hello\r\n", 7);
+	  timeout = 200*1000*6;
+
+	  u ^= 1;
+	  set_led (u);
+
+	  if (play_mode == 0)
+	    {
+	      lcd_clear (colors[cl]);
+
+	      cl++;
+	      if (cl >= 27)
+		cl = 0;
+	    }
+	}
+    }
+
+  return 0;
+}
--- a/example-lcd/sample.ld.gd32vf103
+++ b/example-lcd/sample.ld.gd32vf103
@@ -0,0 +1,92 @@
+/*
+ * GD32VF103 memory setup.
+ */
+MEMORY
+{
+    flash  : org = 0x08000000, len = 128k
+    ram : org = 0x20000000, len = 32k
+}
+
+__ram_start__           = ORIGIN(ram);
+__ram_size__            = 32k;
+__ram_end__             = __ram_start__ + __ram_size__;
+
+SECTIONS
+{
+  . = 0;
+
+  _text = .;
+
+  .text :
+  {
+      *(.text.startup.0)
+      *(.text.startup.1)
+      *(.text.startup.*)
+      *(.text)
+      *(.text.*)
+      *(.gnu.linkonce.t.*)
+      *(.rodata)
+      *(.rodata.*)
+      . = ALIGN(4);
+  } > flash
+
+  PROVIDE (_etext = .);
+  _textdata = _etext;
+
+  .stacks (NOLOAD) :
+  {
+      . = ALIGN(8);
+      *(.main_stack)
+      *(.process_stack.0)
+      *(.process_stack.1)
+      *(.process_stack.2)
+      *(.process_stack.3)
+      *(.process_stack.4)
+      . = ALIGN(8);
+  } > ram
+
+  .data :
+  {
+      . = ALIGN(4);
+      PROVIDE(_data = .);
+      *(.gnu.linkonce.r.*)
+      *(.data)
+      . = ALIGN(4);
+      *(.data.*)
+      *(.gnu.linkonce.d.*)
+      . = ALIGN(8);
+      PROVIDE( __global_pointer$ = . + 0x800);
+      *(.sdata .sdata.*)
+      *(.gnu.linkonce.s.*)
+      . = ALIGN(8);
+      *(.srodata.cst16)
+      *(.srodata.cst8)
+      *(.srodata.cst4)
+      *(.srodata.cst2)
+      *(.srodata .srodata.*)
+
+  } > ram AT > flash
+
+  . = ALIGN(4);
+  PROVIDE(_edata = .);
+
+  PROVIDE(_bss_start = .);
+  .bss :
+  {
+      *(.sbss*)
+      *(.gnu.linkonce.sb.*)
+      *(.bss .bss.*)
+      *(.gnu.linkonce.b.*)
+      *(COMMON)
+      . = ALIGN(4);
+  } > ram
+
+  . = ALIGN(8);
+
+  PROVIDE(_bss_end = .);
+  PROVIDE(end = .);
+  PROVIDE(_end = .);
+}
+
+__heap_base__   = _end;
+__heap_end__    = __ram_end__;
--- a/example-lcd/stack-def.h
+++ b/example-lcd/stack-def.h
@@ -0,0 +1,55 @@
+#define MAIN_SIZE 0x0100 /* Idle+Exception handlers  */
+#define SIZE_0 0x0600 /* Main program             */
+#define SIZE_1 0x0a00 /* first thread program     */
+#define SIZE_2 0x0600 /* second thread program    */
+#define SIZE_3 0x0000 /* third thread program    */
+#define SIZE_4 0x0000 /* fourth thread program    */
+
+#if defined(STACK_MAIN)
+/*
+ * The terminology of "main" is confusing in ARM architecture.
+ * Here, "main_base" is for exception handlers.
+ */
+/* Idle+Exception handlers */
+char __main_stack_end__[0] __attribute__ ((section(".main_stack")));
+char main_base[MAIN_SIZE] __attribute__ ((section(".main_stack")));
+
+/* Main program            */
+char __process0_stack_end__[0] __attribute__ ((section(".process_stack.0")));
+char process0_base[SIZE_0] __attribute__ ((section(".process_stack.0")));
+#endif
+
+/* First thread program    */
+#if defined(STACK_PROCESS_1)
+char process1_base[SIZE_1] __attribute__ ((section(".process_stack.1")));
+#endif
+
+/* Second thread program   */
+#if defined(STACK_PROCESS_2)
+char process2_base[SIZE_2] __attribute__ ((section(".process_stack.2")));
+#endif
+
+/* Third thread program    */
+#if defined(STACK_PROCESS_3)
+char process3_base[SIZE_3] __attribute__ ((section(".process_stack.3")));
+#endif
+
+/* Fourth thread program    */
+#if defined(STACK_PROCESS_4)
+char process4_base[SIZE_4] __attribute__ ((section(".process_stack.4")));
+#endif
+
+/* Fifth thread program    */
+#if defined(STACK_PROCESS_5)
+char process5_base[SIZE_5] __attribute__ ((section(".process_stack.5")));
+#endif
+
+/* Sixth thread program    */
+#if defined(STACK_PROCESS_6)
+char process6_base[SIZE_6] __attribute__ ((section(".process_stack.6")));
+#endif
+
+/* Seventh thread program    */
+#if defined(STACK_PROCESS_7)
+char process7_base[SIZE_7] __attribute__ ((section(".process_stack.7")));
+#endif
--- a/example-lcd/usb-vendor-specific.c
+++ b/example-lcd/usb-vendor-specific.c
@@ -0,0 +1,585 @@
+#include <stdint.h>
+#include <stdlib.h>
+#include <chopstx.h>
+#include <string.h>
+#include "board.h"
+#include "usb_lld.h"
+#include "vrsp.h"
+
+extern uint16_t screen_image[12800];
+
+static chopstx_intr_t usb_intr;
+
+struct vrsp {
+  struct usb_dev dev;
+  chopstx_mutex_t mtx;
+  chopstx_cond_t cnd;
+  uint32_t device_state     : 3;     /* USB device status */
+  uint32_t screen_mem_owner : 1;     /* 0: driver, 1: app */
+  uint32_t mode        : 8;
+  uint16_t *screen_ptr;
+};
+
+static struct vrsp vrsp0;
+
+/*
+ * Locate VRSP structure from interface number or endpoint number.
+ * Currently, it always returns vrsp0, because we only have the one.
+ */
+static struct vrsp *
+vrsp_get (int interface, uint8_t ep_num)
+{
+  struct vrsp *v = &vrsp0;
+
+  (void)interface;
+  (void)ep_num;
+  return v;
+}
+
+static void vrsp_update_finish (struct vrsp *v, int value);
+
+/* USB Device Descriptor */
+static const uint8_t vrsp_device_desc[18] = {
+  18,   /* bLength */
+  DEVICE_DESCRIPTOR,		/* bDescriptorType */
+  0x10, 0x01,			/* bcdUSB = 1.1 */
+  0x00,				/* bDeviceClass.                    */
+  0x00,				/* bDeviceSubClass.                 */
+  0x00,				/* bDeviceProtocol.                 */
+  0x40,				/* bMaxPacketSize.                  */
+  0xFF, 0xFF, /* idVendor  */
+  0x01, 0x00, /* idProduct */
+  0x00, 0x01, /* bcdDevice  */
+  1,				/* iManufacturer.                   */
+  2,				/* iProduct.                        */
+  3,				/* iSerialNumber.                   */
+  1				/* bNumConfigurations.              */
+};
+
+#define FEATURE_BUS_POWERED	0x80
+
+/* Configuration Descriptor */
+static const uint8_t vrsp_config_desc[32] = {
+  9,
+  CONFIG_DESCRIPTOR,		/* bDescriptorType: Configuration */
+  /* Configuration Descriptor.*/
+  32, 0x00,			/* wTotalLength.                    */
+  0x01,				/* bNumInterfaces.                  */
+  0x01,				/* bConfigurationValue.             */
+  0,				/* iConfiguration.                  */
+  FEATURE_BUS_POWERED,		/* bmAttributes.                    */
+  50,				/* bMaxPower (100mA).               */
+  /* Interface Descriptor.*/
+  9,
+  INTERFACE_DESCRIPTOR,
+  0x00,		   /* bInterfaceNumber.                */
+  0x00,		   /* bAlternateSetting.               */
+  0x02,		   /* bNumEndpoints.                   */
+  0xFF,		   /* bInterfaceClass (Vendor specific).  */
+  0x00,		   /* bInterfaceSubClass.  */
+  0x00,		   /* bInterfaceProtocol.  */
+  0,	           /* iInterface.                      */
+  /* Endpoint 1-OUT Descriptor.*/
+  7,
+  ENDPOINT_DESCRIPTOR,
+  ENDP1,         /* bEndpointAddress.    */
+  0x02,          /* bmAttributes (Bulk).             */
+  0x40, 0x00,	 /* wMaxPacketSize.                  */
+  0x00,		 /* bInterval.                       */
+  /* Endpoint 1-IN Descriptor.*/
+  7,
+  ENDPOINT_DESCRIPTOR,
+  ENDP1|0x80,    /* bEndpointAddress.    */
+  0x02,          /* bmAttributes (Bulk).             */
+  0x40, 0x00,	 /* wMaxPacketSize.                  */
+  0x00,		 /* bInterval.                       */
+};
+
+
+/*
+ * U.S. English language identifier.
+ */
+static const uint8_t vrsp_string0[4] = {
+  4,				/* bLength */
+  STRING_DESCRIPTOR,
+  0x09, 0x04			/* LangID = 0x0409: US-English */
+};
+
+static const uint8_t vrsp_string1[] = {
+  23*2+2,			/* bLength */
+  STRING_DESCRIPTOR,		/* bDescriptorType */
+  /* Manufacturer: "Flying Stone Technology" */
+  'F', 0, 'l', 0, 'y', 0, 'i', 0, 'n', 0, 'g', 0, ' ', 0, 'S', 0,
+  't', 0, 'o', 0, 'n', 0, 'e', 0, ' ', 0, 'T', 0, 'e', 0, 'c', 0,
+  'h', 0, 'n', 0, 'o', 0, 'l', 0, 'o', 0, 'g', 0, 'y', 0, 
+};
+
+static const uint8_t vrsp_string2[] = {
+  14*2+2,			/* bLength */
+  STRING_DESCRIPTOR,		/* bDescriptorType */
+  /* Product name: "Chopstx Sample" */
+  'C', 0, 'h', 0, 'o', 0, 'p', 0, 's', 0, 't', 0, 'x', 0, ' ', 0,
+  'S', 0, 'a', 0, 'm', 0, 'p', 0, 'l', 0, 'e', 0,
+};
+
+/*
+ * Serial Number string.
+ */
+static const uint8_t vrsp_string3[10] = {
+  10,				    /* bLength */
+  STRING_DESCRIPTOR,		    /* bDescriptorType */
+  '0', 0,  '.', 0,  '0', 0, '0', 0, /* Version number */
+};
+
+#define NUM_INTERFACES 1
+
+static void
+usb_device_reset (struct usb_dev *dev)
+{
+  usb_lld_reset (dev, FEATURE_BUS_POWERED);
+
+  chopstx_mutex_lock (&vrsp0.mtx);
+  vrsp0.device_state = USB_DEVICE_STATE_ATTACHED;
+  vrsp0.screen_mem_owner = 0;
+  vrsp0.screen_ptr = screen_image;
+  vrsp0.mode = 2;
+  chopstx_cond_signal (&vrsp0.cnd);
+  chopstx_mutex_unlock (&vrsp0.mtx);
+}
+
+
+static void
+usb_ctrl_write_finish (struct usb_dev *dev)
+{
+  (void)dev;
+}
+
+
+static int
+usb_setup (struct usb_dev *dev)
+{
+  struct device_req *arg = &dev->dev_req;
+  uint8_t type_rcp = arg->type & (REQUEST_TYPE|RECIPIENT);
+
+  if (USB_SETUP_SET (arg->type))
+    {
+      if (type_rcp == (VENDOR_REQUEST | INTERFACE_RECIPIENT)
+	  && arg->request == 0x00
+	  && arg->index == 0 /* interface 0 */)
+	{
+	  struct vrsp *v = vrsp_get (arg->index, 0);
+
+	  /* Finish the screen update.  */
+	  vrsp_update_finish (v, arg->value);
+	  return usb_lld_ctrl_ack (dev);
+	}
+    }
+
+  return -1;
+}
+
+static int
+usb_get_descriptor (struct usb_dev *dev)
+{
+  struct device_req *arg = &dev->dev_req;
+  uint8_t rcp = arg->type & RECIPIENT;
+  uint8_t desc_type = (arg->value >> 8);
+  uint8_t desc_index = (arg->value & 0xff);
+
+  if (rcp != DEVICE_RECIPIENT)
+    return -1;
+
+  if (desc_type == DEVICE_DESCRIPTOR)
+    return usb_lld_ctrl_send (dev,
+			      vrsp_device_desc, sizeof (vrsp_device_desc));
+  else if (desc_type == CONFIG_DESCRIPTOR)
+    return usb_lld_ctrl_send (dev,
+			      vrsp_config_desc, sizeof (vrsp_config_desc));
+  else if (desc_type == STRING_DESCRIPTOR)
+    {
+      const uint8_t *str;
+      int size;
+
+      switch (desc_index)
+	{
+	case 0:
+	  str = vrsp_string0;
+	  size = sizeof (vrsp_string0);
+	  break;
+	case 1:
+	  str = vrsp_string1;
+	  size = sizeof (vrsp_string1);
+	  break;
+	case 2:
+	  str = vrsp_string2;
+	  size = sizeof (vrsp_string2);
+	  break;
+	case 3:
+	  str = vrsp_string3;
+	  size = sizeof (vrsp_string3);
+	  break;
+	default:
+	  return -1;
+	}
+
+      return usb_lld_ctrl_send (dev, str, size);
+    }
+
+  return -1;
+}
+
+static const uint8_t status_zero;
+
+static void
+vrsp_setup_endpoints_for_interface (struct usb_dev *dev,
+				    uint16_t interface, int stop)
+{
+  if (interface == 0)
+    {
+      if (!stop)
+	{
+          struct vrsp *v = vrsp_get (interface, 0);
+
+	  usb_lld_setup_endp (dev, ENDP1, EP_BULK, 1, 1);
+
+	  if (v->screen_mem_owner == 0)
+	    usb_lld_tx_enable_buf (&v->dev, ENDP1, &status_zero, 1);
+	}
+      else
+	{
+	  usb_lld_stall_rx (dev, ENDP1);
+	  usb_lld_stall_tx (dev, ENDP1);
+	}
+    }
+}
+
+static int
+usb_set_configuration (struct usb_dev *dev)
+{
+  uint8_t current_conf;
+
+  current_conf = usb_lld_current_configuration (dev);
+  if (current_conf == 0)
+    {
+      if (dev->dev_req.value != 1)
+	return -1;
+
+      usb_lld_set_configuration (dev, 1);
+      vrsp_setup_endpoints_for_interface (dev, 0, 0);
+    }
+  else if (current_conf != dev->dev_req.value)
+    {
+      if (dev->dev_req.value != 0)
+	return -1;
+
+      usb_lld_set_configuration (dev, 0);
+      vrsp_setup_endpoints_for_interface (dev, 0, 1);
+    }
+
+  return usb_lld_ctrl_ack (dev);
+}
+
+
+static int
+usb_set_interface (struct usb_dev *dev)
+{
+  uint16_t interface = dev->dev_req.index;
+  uint16_t alt = dev->dev_req.value;
+
+  if (interface >= NUM_INTERFACES)
+    return -1;
+
+  if (alt != 0)
+    return -1;
+  else
+    {
+      vrsp_setup_endpoints_for_interface (dev, interface, 0);
+      return usb_lld_ctrl_ack (dev);
+    }
+}
+
+static int
+usb_get_interface (struct usb_dev *dev)
+{
+  const uint8_t zero = 0;
+  uint16_t interface = dev->dev_req.index;
+
+  if (interface >= NUM_INTERFACES)
+    return -1;
+
+  /* We don't have alternate interface, so, always return 0.  */
+  return usb_lld_ctrl_send (dev, &zero, 1);
+}
+
+static int
+usb_get_status_interface (struct usb_dev *dev)
+{
+  const uint16_t status_info = 0;
+  uint16_t interface = dev->dev_req.index;
+
+  if (interface >= NUM_INTERFACES)
+    return -1;
+
+  return usb_lld_ctrl_send (dev, &status_info, 2);
+}
+
+static void
+vrsp_update_receive (struct vrsp *v, int len)
+{
+  chopstx_mutex_lock (&v->mtx);
+  if (v->screen_mem_owner == 0 && v->screen_ptr)
+    {
+      v->screen_ptr += len / 2;
+      if (v->screen_ptr < screen_image + 12800)
+	usb_lld_rx_enable_buf (&v->dev, ENDP1, v->screen_ptr, 64);
+    }
+  chopstx_mutex_unlock (&v->mtx);
+}
+
+static void
+vrsp_update_finish (struct vrsp *v, int value)
+{
+  chopstx_mutex_lock (&v->mtx);
+  if (v->screen_mem_owner == 0 && v->screen_ptr)
+    {
+      v->screen_ptr = NULL;
+      v->mode = value;
+      chopstx_cond_signal (&v->cnd);
+    }
+  chopstx_mutex_unlock (&v->mtx);
+}
+
+static void
+usb_tx_done (uint8_t ep_num, uint16_t len)
+{
+  struct vrsp *v = vrsp_get (-1, ep_num);
+
+  (void)len;
+
+  /*
+   * Coming here means that notification ("it's ready to accept screen
+   * data") is retrieved by host.  Enable the receive endpoint to
+   * accept data.
+   */
+
+  /* EP_NUM should be ENDP1 in this implementation.  */
+  usb_lld_rx_enable_buf (&v->dev, ENDP1, v->screen_ptr, 64);
+}
+
+static void
+usb_rx_ready (uint8_t ep_num, uint16_t len)
+{
+  struct vrsp *v = vrsp_get (-1, ep_num);
+
+  if (ep_num == ENDP1)
+    vrsp_update_receive (v, len);
+}
+
+#define PRIO_VRSP      4
+
+#define STACK_PROCESS_2
+#include "stack-def.h"
+#define STACK_ADDR_VRSP ((uint32_t)process2_base)
+#define STACK_SIZE_VRSP (sizeof process2_base)
+
+static void *
+vrsp_main (void *arg)
+{
+  struct vrsp *v = arg;
+  struct usb_dev *dev = &v->dev;
+  int e;
+
+  chopstx_claim_irq (&usb_intr, INTR_REQ_USB);
+  usb_lld_init (dev, FEATURE_BUS_POWERED);
+
+  while (1)
+    {
+      chopstx_intr_wait (&usb_intr);
+      if (usb_intr.ready)
+	{
+	  uint8_t ep_num;
+
+	  /*
+	   * When interrupt is detected, call usb_lld_event_handler.
+	   * The event may be one of following:
+	   *    (1) Transfer to endpoint (bulk or interrupt)
+	   *        In this case EP_NUM is encoded in the variable E.
+	   *    (2) "NONE" event: some trasfer was done, but all was
+	   *        done by lower layer, no other work is needed in
+	   *        upper layer.
+	   *    (3) Device events: Reset or Suspend
+	   *    (4) Device requests to the endpoint zero.
+	   *
+	   */
+	  e = usb_lld_event_handler (dev);
+	  chopstx_intr_done (&usb_intr);
+	  ep_num = USB_EVENT_ENDP (e);
+
+	  if (ep_num != 0)
+	    {
+	      if (USB_EVENT_TXRX (e))
+		usb_tx_done (ep_num, USB_EVENT_LEN (e));
+	      else
+		usb_rx_ready (ep_num, USB_EVENT_LEN (e));
+	    }
+	  else
+	    switch (USB_EVENT_ID (e))
+	      {
+	      case USB_EVENT_DEVICE_RESET:
+		usb_device_reset (dev);
+		continue;
+
+	      case USB_EVENT_DEVICE_ADDRESSED:
+		/* The addres is assigned to the device.  We don't
+		 * need to do anything for this actually, but in this
+		 * application, we maintain the USB status of the
+		 * device.  Usually, just "continue" as EVENT_OK is
+		 * OK.
+		 */
+		chopstx_mutex_lock (&v->mtx);
+		v->device_state = USB_DEVICE_STATE_ADDRESSED;
+		chopstx_cond_signal (&v->cnd);
+		chopstx_mutex_unlock (&v->mtx);
+		continue;
+
+	      case USB_EVENT_GET_DESCRIPTOR:
+		if (usb_get_descriptor (dev) < 0)
+		  usb_lld_ctrl_error (dev);
+		continue;
+
+	      case USB_EVENT_SET_CONFIGURATION:
+		if (usb_set_configuration (dev) < 0)
+		  usb_lld_ctrl_error (dev);
+		continue;
+
+	      case USB_EVENT_SET_INTERFACE:
+		if (usb_set_interface (dev) < 0)
+		  usb_lld_ctrl_error (dev);
+		continue;
+
+	      case USB_EVENT_CTRL_REQUEST:
+		/* Device specific device request.  */
+		if (usb_setup (dev) < 0)
+		  usb_lld_ctrl_error (dev);
+		continue;
+
+	      case USB_EVENT_GET_STATUS_INTERFACE:
+		if (usb_get_status_interface (dev) < 0)
+		  usb_lld_ctrl_error (dev);
+		continue;
+
+	      case USB_EVENT_GET_INTERFACE:
+		if (usb_get_interface (dev) < 0)
+		  usb_lld_ctrl_error (dev);
+		continue;
+
+	      case USB_EVENT_SET_FEATURE_DEVICE:
+	      case USB_EVENT_SET_FEATURE_ENDPOINT:
+	      case USB_EVENT_CLEAR_FEATURE_DEVICE:
+	      case USB_EVENT_CLEAR_FEATURE_ENDPOINT:
+		usb_lld_ctrl_ack (dev);
+		continue;
+
+	      case USB_EVENT_CTRL_WRITE_FINISH:
+		/* Control WRITE transfer finished.  */
+		usb_ctrl_write_finish (dev);
+		continue;
+
+	      case USB_EVENT_OK:
+	      case USB_EVENT_DEVICE_SUSPEND:
+	      default:
+		continue;
+	      }
+	}
+    }
+
+  return NULL;
+}
+
+static int
+vrsp_ready_check (void *arg)
+{
+  struct vrsp *v = arg;
+  return v->screen_mem_owner == 0 && v->screen_ptr == NULL;
+}
+
+
+/* API exposed to application.  */
+
+struct vrsp *
+vrsp_open (void)
+{
+  struct vrsp *v = &vrsp0;     /* Now, we only have a single VRSP.  */
+
+  chopstx_mutex_init (&v->mtx);
+  chopstx_cond_init (&v->cnd);
+  v->device_state = USB_DEVICE_STATE_UNCONNECTED;
+  v->screen_mem_owner = 0;
+  v->screen_ptr = screen_image;
+  v->mode = 1;
+
+  chopstx_create (PRIO_VRSP, STACK_ADDR_VRSP, STACK_SIZE_VRSP, vrsp_main, v);
+  return v;
+}
+
+
+void
+vrsp_prepare_poll (struct vrsp *v, chopstx_poll_cond_t *poll_desc)
+{
+  poll_desc->type  = CHOPSTX_POLL_COND;
+  poll_desc->ready = 0;
+  poll_desc->cond  = &v->cnd;
+  poll_desc->mutex = &v->mtx;
+  poll_desc->check = vrsp_ready_check;
+  poll_desc->arg   = v;
+}
+
+
+/*
+ * vrsp_screen_acquire: Acquire the screen memory by the application to
+ * update the LCD.
+ *
+ * Returns  <  0 on error
+ *	    >= 0 on success
+ */
+int
+vrsp_screen_acquire (struct vrsp *v)
+{
+  int r = 0;
+
+  chopstx_mutex_lock (&v->mtx);
+  while (1)
+    if (v->screen_mem_owner != 0)
+      {
+	/* something goes wrong, it's your turn already.  */
+	r = -1;
+	break;
+      }
+    else if (v->screen_ptr)
+      /* The use of screen has not been finished yet.  */
+      chopstx_cond_wait (&v->cnd, &v->mtx);
+    else
+      {
+	v->screen_mem_owner = 1;
+	r = v->mode;
+	break;
+      }
+  chopstx_mutex_unlock (&v->mtx);
+  return r;
+}
+
+
+/*
+ * vrsp_screen_release: release the screen memory by the application
+ */
+void
+vrsp_screen_release (struct vrsp *v)
+{
+  chopstx_mutex_lock (&v->mtx);
+  v->screen_mem_owner = 0;
+  v->screen_ptr = screen_image;
+  chopstx_mutex_unlock (&v->mtx);
+
+  /* Put the notification to host.  */
+  usb_lld_tx_enable_buf (&v->dev, ENDP1, &status_zero, 1);
+}
--- a/example-lcd/vrsp.h
+++ b/example-lcd/vrsp.h
@@ -0,0 +1,7 @@
+struct vrsp;
+
+struct vrsp *vrsp_open (void);
+
+void vrsp_prepare_poll (struct vrsp *v, chopstx_poll_cond_t *poll_desc);
+int vrsp_screen_acquire (struct vrsp *v);
+void vrsp_screen_release (struct vrsp *v);
--- a/example-led/Makefile
+++ b/example-led/Makefile
@@ -15,6 +15,7 @@ LDSCRIPT= sample.ld.m4
 ### LDSCRIPT= sample.ld.m3
 CSRC = sample.c

+ARCH=cortex-m
 CHIP=stm32l4
 USE_SYS = yes

--- a/example-primer2/Makefile
+++ b/example-primer2/Makefile
@@ -8,6 +8,7 @@ LDSCRIPT= lcd.ld
 CSRC = primer2-switches.c primer2-ts.c lcd.c main.c \
       neug.c sha256.c

+ARCH=cortex-m
 CHIP=stm32f103
 USE_SYS = yes
 USE_USB = yes
--- a/example-usart/Makefile
+++ b/example-usart/Makefile
@@ -15,6 +15,7 @@ LDSCRIPT= sample.ld.m4
 ### LDSCRIPT= sample.ld.m3
 CSRC = sample.c

+ARCH=cortex-m
 CHIP=stm32l4
 USE_SYS = yes
 USE_USART = yes
--- a/example-usb-serial/Makefile
+++ b/example-usb-serial/Makefile
@@ -6,6 +6,7 @@ CHOPSTX = ..
 LDSCRIPT= sample.ld
 CSRC = sample.c usb-cdc.c

+ARCH=cortex-m
 CHIP=stm32f103

 USE_SYS = yes
--- a/mcu/chx-gd32vf103.c
+++ b/mcu/chx-gd32vf103.c
@@ -0,0 +1,22 @@
+#include <stdint.h>
+#include <mcu/gd32vf103.h>
+
+asm (
+	".equ	wfe,0x810\n\t"    /* Not used (yet). */
+	".equ	sleepvalue,0x811" /* Not used (yet). */
+);
+
+extern int chx_allow_sleep;
+
+void
+chx_sleep_mode (int how)
+{
+  /*TBD*/
+  (void)how;
+}
+
+void
+chx_prepare_sleep_mode (void)
+{
+  /*TBD*/
+}
--- a/mcu/clk_gpio_init-gd32vf103.c
+++ b/mcu/clk_gpio_init-gd32vf103.c
@@ -0,0 +1,79 @@
+#include <stdint.h>
+#include <mcu/gd32vf103.h>
+
+static void __attribute__((used,section(".text.startup.1")))
+clock_init (void)
+{
+  /* HXTAL setup */
+  RCU->CTL |= RCU_CTL_HXTALEN;
+  while (!(RCU->CTL & RCU_CTL_HXTALSTB))
+    ;
+
+  RCU->CFG0 &= ~RCU_CFG0_AHB_APB1_APB2_MASK;
+
+  /* CK_AHB = CK_SYS */
+  RCU->CFG0 |= RCU_CFG0_AHB_CKSYS_DIV1;
+  /* CK_APB2 = CK_AHB */
+  RCU->CFG0 |= RCU_CFG0_APB2_CKAHB_DIV1;
+  /* CK_APB1 = CK_AHB/2 */
+  RCU->CFG0 |= RCU_CFG0_APB1_CKAHB_DIV2;
+  /* CK_USBFS = 48MHz */
+  RCU->CFG0 |= RCU_CFG0_USBFSPSC_DIV2;
+
+  /* CK_ADC, CK_TIMER1xxx, CK_TIMER0, CK_I2S */
+
+  /* PLL setup */
+  RCU->CFG0 &= ~RCU_CFG0_PLLSRC_PLLMF_MASK;
+  RCU->CFG0 |= RCU_CFG0_PLL_MUL_VALUE | RCU_CFG0_PLLSRC_HXTAL;
+
+  RCU->CFG1 &= ~RCU_CFG1_PREDV0SEL_MASK;
+  RCU->CFG1 |= RCU_CFG1_PREDV0SEL_HXTAL;
+
+  RCU->CTL |= RCU_CTL_PLLEN;
+
+  while (!(RCU->CTL & RCU_CTL_PLLSTB))
+    ;
+
+  /* Select PLL as system clock */
+  RCU->CFG0 &= ~RCU_CFG0_SCS_MASK;
+  RCU->CFG0 |= RCU_CFG0_CKSYSSRC_PLL;
+
+  /* Wait until PLL is selected as system clock */
+  while (!(RCU->CFG0 & RCU_CFG0_SCSS_PLL))
+    ;
+
+  /* Stop IRC8M */
+  RCU->CTL &= ~RCU_CTL_IRC8MEN;
+
+  /* Flash setup: TBD */
+}
+
+static void __attribute__((used,section(".text.startup.1")))
+gpio_init (void)
+{
+  RCU->APB2EN  |= RCU_APB2_GPIO;
+  RCU->APB2RST = RCU_APB2_GPIO;
+  RCU->APB2RST = 0;
+
+#ifdef AFIO_MAPR_SOMETHING
+  AFIO->MAPR |= AFIO_MAPR_SOMETHING;
+#endif
+
+  /* LED is mandatory.  We configure it always.  */
+  GPIO_LED->ODR = VAL_GPIO_LED_ODR;
+  GPIO_LED->CRH = VAL_GPIO_LED_CRH;
+  GPIO_LED->CRL = VAL_GPIO_LED_CRL;
+
+  /* If there is USB enabler pin and it's independent, we configure it.  */
+#if defined(GPIO_USB) && defined(VAL_GPIO_USB_ODR)
+  GPIO_USB->ODR = VAL_GPIO_USB_ODR;
+  GPIO_USB->CRH = VAL_GPIO_USB_CRH;
+  GPIO_USB->CRL = VAL_GPIO_USB_CRL;
+#endif
+
+#ifdef GPIO_OTHER
+  GPIO_OTHER->ODR = VAL_GPIO_OTHER_ODR;
+  GPIO_OTHER->CRH = VAL_GPIO_OTHER_CRH;
+  GPIO_OTHER->CRL = VAL_GPIO_OTHER_CRL;
+#endif
+}
--- a/mcu/gd32vf103.h
+++ b/mcu/gd32vf103.h
@@ -0,0 +1,59 @@
+struct RCU {
+  volatile uint32_t CTL;
+  volatile uint32_t CFG0;
+  volatile uint32_t INT;
+  volatile uint32_t APB2RST;
+  volatile uint32_t APB1RST;
+  volatile uint32_t AHBEN;
+  volatile uint32_t APB2EN;
+  volatile uint32_t APB1EN;
+  volatile uint32_t BDCTL;
+  volatile uint32_t RSTSCK;
+  volatile uint32_t AHBRST;
+  volatile uint32_t CFG1;
+  uint32_t rsv;
+  volatile uint32_t DSV;
+};
+static struct RCU *const RCU = (struct RCU *)0x40021000;
+
+#define RCU_CTL_HXTALEN  0x00010000
+#define RCU_CTL_HXTALSTB 0x00020000
+#define RCU_CTL_PLLSTB   0x02000000
+#define RCU_CTL_PLLEN    0x01000000
+#define RCU_CTL_IRC8MEN  0x00000001
+
+#define RCU_CFG0_ADC_MASK           0x0000c000
+#define RCU_CFG0_AHB_APB1_APB2_MASK 0x00003ff0
+#define RCU_CFG0_AHB_CKSYS_DIV1     0x00000000
+#define RCU_CFG0_APB2_CKAHB_DIV1    0x00000000
+#define RCU_CFG0_APB1_CKAHB_DIV2    0x00000400
+#define RCU_CFG0_PLLSRC_PLLMF_MASK  0x203d0000
+#define RCU_CFG0_PLL_MUL12          0x00280000
+#define RCU_CFG0_PLLSRC_HXTAL       0x00010000
+#define RCU_CFG0_SCS_MASK           0x00000003
+#define RCU_CFG0_SCSS_PLL           0x00000008
+#define RCU_CFG0_CKSYSSRC_PLL       0x00000002
+#define RCU_CFG0_USBFSPSC_DIV2      0x00c00000
+
+#define RCU_CFG1_PREDV0SEL_MASK     0x00010000
+#define RCU_CFG1_PREDV0SEL_HXTAL    0x00000000
+
+#define RCU_APB2_GPIOA  0x00000004
+#define RCU_APB2_GPIOB  0x00000008
+#define RCU_APB2_GPIOC  0x00000010
+
+#define RCU_AHB_USBFS   0x00001000
+
+/* Semantics is exactly same as STM32F103.  */
+struct GPIO {
+  volatile uint32_t CRL;
+  volatile uint32_t CRH;
+  volatile uint32_t IDR;
+  volatile uint32_t ODR;
+  volatile uint32_t BSRR;
+  volatile uint32_t BRR;
+  volatile uint32_t LCKR;
+};
+static struct GPIO *const GPIOA = (struct GPIO *)0x40010800;
+static struct GPIO *const GPIOB = (struct GPIO *)0x40010C00;
+static struct GPIO *const GPIOC = (struct GPIO *)0x40011000;
--- a/mcu/usb-gd32vf103.c
+++ b/mcu/usb-gd32vf103.c
--- a/mcu/usb-usbip.c
+++ b/mcu/usb-usbip.c
@@ -1,7 +1,7 @@
 /*
 * usb-usbip.c - USB Device Emulation (server side) by USBIP
 *
- * Copyright (C) 2017, 2018  g10 Code GmbH
+ * Copyright (C) 2017, 2018, 2021  g10 Code GmbH
 * Author: NIIBE Yutaka <gniibe@fsij.org>
 *
 * This file is a part of Chopstx, a thread library for embedded.
@@ -1080,6 +1080,11 @@ usbip_run_server (void *arg)
      exit (1);
    }

+  fputs ("USBIP thread started.\n", stdout);
+  fputs ("You can use this by attaching following commands:\n", stdout);
+  fputs ("    # modprobe vhci_hcd\n", stdout);
+  fputs ("    # usbip attach -r 127.0.0.1 -b 1-1\n", stdout);
+
  pollfds[1].fd = shutdown_notify_fd;
  pollfds[1].events = POLLIN;
  pollfds[1].revents = 0;
--- a/rules.mk
+++ b/rules.mk
@@ -1,7 +1,7 @@
 # Chopstx make rules.

 ifeq ($(EMULATION),)
-CSRC += $(CHOPSTX)/entry.c
+CSRC += $(CHOPSTX)/entry-$(ARCH).c
 else
 CSRC += $(CHOPSTX)/entry-gnu-linux.c
 endif
@@ -62,22 +62,36 @@ LLIBDIR   = $(patsubst %,-L%,$(LIBDIR))
 VPATH     = $(sort $(dir $(CSRC)))
 ###
 ifeq ($(EMULATION),)
-MCFLAGS   = -mcpu=$(MCU)
+ifeq ($(ARCH),riscv32)
+# For now, just for my use of picolibc
+INCDIR += /usr/local/picolibc/riscv64-unknown-elf/include
+LIBDIR += /usr/local/picolibc/riscv64-unknown-elf/lib/rv32imac/ilp32
+#
+MCFLAGS   = -march=rv32imac -mabi=ilp32
+LDFLAGS   = $(MCFLAGS) -nodefaultlibs -nostartfiles -lc -T$(LDSCRIPT) \
+            -Wl,-Map=$(BUILDDIR)/$(PROJECT).map,--cref,--no-warn-mismatch
+else
+MCFLAGS   = -mcpu=$(MCU) -masm-syntax-unified
 LDFLAGS   = $(MCFLAGS) -nostartfiles -T$(LDSCRIPT) \
            -Wl,-Map=$(BUILDDIR)/$(PROJECT).map,--cref,--no-warn-mismatch,--gc-sections
+endif
 else
 MCFLAGS   =
 LDFLAGS   =
 DEFS      += -D_GNU_SOURCE
 endif
+DEFS      += -DARCH_HEADER='"chopstx-$(ARCH).h"' -DARCH_IMPL='"chopstx-$(ARCH).c"'

 CFLAGS    = $(MCFLAGS) $(OPT) $(CWARN) -Wa,-alms=$(BUILDDIR)/$(notdir $(<:.c=.lst)) $(DEFS)
 LDFLAGS  += $(LLIBDIR)

 ifeq ($(EMULATION),)
+ifeq ($(ARCH),riscv32)
+else
 CFLAGS   += -mthumb -mno-thumb-interwork -DTHUMB
 LDFLAGS  += -mthumb -mno-thumb-interwork
 endif
+endif

 CFLAGS   += -MD -MP -MF .dep/$(@F).d

--- a/usb_lld.h
+++ b/usb_lld.h
@@ -38,11 +38,19 @@ enum DESCRIPTOR_TYPE
 #define USB_SETUP_GET(req) ((req & REQUEST_DIR) != 0)

 struct device_req {
-  uint8_t type;
-  uint8_t request;
-  uint16_t value;
-  uint16_t index;
-  uint16_t len;
+  union {
+    struct {
+      uint8_t type;
+      uint8_t request;
+      uint16_t value;
+      uint16_t index;
+      uint16_t len;
+    };
+    struct {
+      uint32_t w0;
+      uint32_t w1;
+    };
+  };
 };

 struct ctrl_data {
@@ -51,12 +59,27 @@ struct ctrl_data {
  uint8_t require_zlp;
 };

+#ifdef MCU_GD32VF1
+#define USB_REQUIRE_TXRX_INFO 1
+#endif
+
+#ifdef USB_REQUIRE_TXRX_INFO
+struct epctl {
+  uint8_t *addr;
+  uint16_t len;
+};
+#endif
+
 struct usb_dev {
  uint8_t configuration;
  uint8_t feature;
  uint8_t state;
  struct device_req dev_req;
  struct ctrl_data ctrl_data;
+#ifdef USB_REQUIRE_TXRX_INFO
+  struct epctl epctl_tx[3];
+  struct epctl epctl_rx[3];
+#endif
 };

 enum {
@@ -152,7 +175,22 @@ void usb_lld_rx_enable_buf (int ep_num, void *buf, size_t len);
 void usb_lld_setup_endp (struct usb_dev *dev, int ep_num, int rx_en, int tx_en);
 void usb_lld_stall_tx (int ep_num);
 void usb_lld_stall_rx (int ep_num);
-#else
+#elif defined(MCU_GD32VF1)
+#define INTR_REQ_USB        86
+#define INTR_REQ_USB_WAKEUP 61
+void usb_lld_tx_enable_buf (struct usb_dev *dev, int ep_num, const void *buf, size_t len);
+void usb_lld_rx_enable_buf (struct usb_dev *dev, int ep_num, void *buf, size_t len);
+
+/* EP_TYPE[1:0] EndPoint TYPE */
+#define EP_CONTROL     0x00
+#define EP_ISOCHRONOUS 0x01
+#define EP_BULK        0x02
+#define EP_INTERRUPT   0x03
+
+void usb_lld_setup_endp (struct usb_dev *dev, int ep_num, int ep_type, int rx_en, int tx_en);
+void usb_lld_stall_tx (struct usb_dev *dev, int ep_num);
+void usb_lld_stall_rx (struct usb_dev *dev, int ep_num);
+#else /* STM32L4 or STM32F103/GD32F103 */
 #if defined(MCU_STM32L4)
 #define INTR_REQ_USB 67
 #else
Author	SHA1	Message	Date
NIIBE Yutaka	5a3a3e98d4	Version 2.2. Signed-off-by: NIIBE Yutaka <gniibe@fsij.org>	2021-02-26 09:16:49 +09:00
NIIBE Yutaka	7ad2c9030a	One more change for Cortex-M3/M4 asm for shorter result. Signed-off-by: NIIBE Yutaka <gniibe@fsij.org>	2021-02-26 09:15:18 +09:00
NIIBE Yutaka	a70b1acbf6	Change asm for Cortex-M0/3/4. Signed-off-by: NIIBE Yutaka <gniibe@fsij.org>	2021-02-25 12:52:26 +09:00
NIIBE Yutaka	fd8bb46b8b	Fix for Cortex-M0. Signed-off-by: NIIBE Yutaka <gniibe@fsij.org>	2021-02-25 10:35:29 +09:00
NIIBE Yutaka	95fe257dc0	cortex-m: Fix chx_handle_intr. Signed-off-by: NIIBE Yutaka <gniibe@fsij.org>	2021-02-19 15:56:43 +09:00
NIIBE Yutaka	2fb3c1c503	GNU/Linux: Use getrandom for ADC driver. Signed-off-by: NIIBE Yutaka <gniibe@fsij.org>	2021-02-17 16:24:22 +09:00
NIIBE Yutaka	f84f6c1cac	GNU/Linux: Add start-up message for USB driver. Signed-off-by: NIIBE Yutaka <gniibe@fsij.org>	2021-02-17 10:29:08 +09:00
NIIBE Yutaka	68b78a0ade	GNU/Linux: Fix AckBtn driver, again. Signed-off-by: NIIBE Yutaka <gniibe@fsij.org>	2021-02-17 10:12:08 +09:00
NIIBE Yutaka	8c48b0d7d3	GNU/Linux: Fix AckBtn driver. Signed-off-by: NIIBE Yutaka <gniibe@fsij.org>	2021-02-17 09:53:49 +09:00
NIIBE Yutaka	b3c35aebdd	Add new driver for AckBtn for GNU/Linux emulation. Signed-off-by: NIIBE Yutaka <gniibe@fsij.org>	2021-02-17 09:47:19 +09:00
NIIBE Yutaka	c0f3567ed6	Version 2.1. Signed-off-by: NIIBE Yutaka <gniibe@fsij.org>	2021-02-12 09:19:08 +09:00
NIIBE Yutaka	27791641aa	GNU/Linux: Fix the example. Signed-off-by: NIIBE Yutaka <gniibe@fsij.org>	2021-02-10 14:49:19 +09:00
NIIBE Yutaka	eaa47d5059	Update copyright notices. Signed-off-by: NIIBE Yutaka <gniibe@fsij.org>	2021-02-10 10:44:37 +09:00
NIIBE Yutaka	b491d815e5	GNU/Linux: Fix the example to cancel the input on timeout. Signed-off-by: NIIBE Yutaka <gniibe@fsij.org>	2021-02-10 10:19:06 +09:00
NIIBE Yutaka	c1433f1520	GNU/Linux: Application can exit by SIGINT or SIGTERM. Signed-off-by: NIIBE Yutaka <gniibe@fsij.org>	2021-02-10 09:33:53 +09:00
NIIBE Yutaka	bd66c51e35	Fix chx_recv_irq. Fixes-commit: `d2df891ba5` Signed-off-by: NIIBE Yutaka <gniibe@fsij.org>	2021-02-10 09:22:37 +09:00
NIIBE Yutaka	bd8f39f3c9	GNU/Linux: Add/fix comments. Signed-off-by: NIIBE Yutaka <gniibe@fsij.org>	2021-02-10 09:05:16 +09:00
NIIBE Yutaka	88909bab49	GNU/Linux: Make sure thread struct is cleared. Also, added a comment for makecontext. Signed-off-by: NIIBE Yutaka <gniibe@fsij.org>	2021-02-09 16:50:48 +09:00
NIIBE Yutaka	66f08d87e4	Fix example for GNU/Linux emulation. Signed-off-by: NIIBE Yutaka <gniibe@fsij.org>	2021-02-09 16:38:13 +09:00
NIIBE Yutaka	7b7335bc5d	Fix GNU/Linux emulation. Signed-off-by: NIIBE Yutaka <gniibe@fsij.org>	2021-02-09 16:36:40 +09:00
NIIBE Yutaka	af3ef1f93d	Add comments to show access to RUNNING. Signed-off-by: NIIBE Yutaka <gniibe@fsij.org>	2021-02-09 13:33:51 +09:00
NIIBE Yutaka	d2df891ba5	Fix chx_recv_irq. Signed-off-by: NIIBE Yutaka <gniibe@fsij.org>	2021-02-08 17:33:24 +09:00
NIIBE Yutaka	cfcdeebb78	More fixes for Cortex-M0/Cortex-M3/Cortex-M4 implementations. Signed-off-by: NIIBE Yutaka <gniibe@fsij.org>	2021-02-08 12:22:16 +09:00
NIIBE Yutaka	2832104263	Rewrite the ChangeLog entry. Signed-off-by: NIIBE Yutaka <gniibe@fsij.org>	2021-02-05 15:30:56 +09:00
NIIBE Yutaka	b0986cdb09	Fix preemption. Consider the sequence: chx_handle_intr -> chx_handle_intr -> preempt We can't use R0 passing as an argument to preempt. Signed-off-by: NIIBE Yutaka <gniibe@fsij.org>	2021-02-05 11:26:20 +09:00
NIIBE Yutaka	c3f00e1c69	cortex-m: Multiple interrupts handling may occur on Cortex-M3 too. Signed-off-by: NIIBE Yutaka <gniibe@fsij.org>	2021-02-05 10:54:41 +09:00
NIIBE Yutaka	6d46ea2a4c	cortex-m: Don't share return path between PREEMPT and SVC. Signed-off-by: NIIBE Yutaka <gniibe@fsij.org>	2021-02-05 10:49:09 +09:00
NIIBE Yutaka	7035103a49	Fix the previous commit. Handle the case when multiple interrupts are active simultaneously. Signed-off-by: NIIBE Yutaka <gniibe@fsij.org>	2021-02-05 09:38:38 +09:00
NIIBE Yutaka	8b6c1ebd24	Fixes for FSM-55. I realized that tail-chaining doesn't work with STM32F0. Signed-off-by: NIIBE Yutaka <gniibe@fsij.org>	2021-02-04 15:32:23 +09:00
NIIBE Yutaka	34e7673871	Version 2.0. Signed-off-by: NIIBE Yutaka <gniibe@fsij.org>	2020-06-26 10:03:26 +09:00
NIIBE Yutaka	0e5342b54f	doc: Update doc/chopstx-api.texi. Signed-off-by: NIIBE Yutaka <gniibe@fsij.org>	2020-06-24 10:54:43 +09:00
NIIBE Yutaka	afd1339c58	Add chopstx_critical. Signed-off-by: NIIBE Yutaka <gniibe@fsij.org>	2020-06-23 13:29:14 +09:00
NIIBE Yutaka	86d805620c	Revert "Fix EP0 receiving more packets." This reverts commit `3507027e98`. -- Thanks to Jeremy Drake to catch this questionable change. While the value LEN is used for drivers for other machines to prepare receiving buffer in hardware USB core, it is not used in STM32F103 which has dedicated hardware memory in the USB core.	2020-01-06 09:58:10 +09:00
NIIBE Yutaka	22fc473eb5	Revert "Add a ChangeLog entry for USB fix." This reverts commit `fe451d6d8a`.	2020-01-06 09:57:50 +09:00
NIIBE Yutaka	22a7d6c998	Fix USB driver of GD32VF1 and example-lcd. Signed-off-by: NIIBE Yutaka <gniibe@fsij.org>	2019-12-27 09:54:40 +09:00
NIIBE Yutaka	99023a1126	Update example-lcd. Signed-off-by: NIIBE Yutaka <gniibe@fsij.org>	2019-12-27 09:49:35 +09:00
NIIBE Yutaka	76f962fbdd	Fix SPI driver. Signed-off-by: NIIBE Yutaka <gniibe@fsij.org>	2019-12-27 09:47:26 +09:00
NIIBE Yutaka	228d1d06ce	Add USB driver for GD32VF103. Signed-off-by: NIIBE Yutaka <gniibe@fsij.org>	2019-12-27 09:42:22 +09:00
NIIBE Yutaka	167741bdc8	chopstx-gnu-linux.c: cosmetic change. Signed-off-by: NIIBE Yutaka <gniibe@fsij.org>	2019-12-27 09:37:33 +09:00
NIIBE Yutaka	334240bfe3	board/board-longan-nano.h: Modify Port B config. Signed-off-by: NIIBE Yutaka <gniibe@fsij.org>	2019-12-27 09:34:29 +09:00
NIIBE Yutaka	a006cb7d0a	Add ChangeLog entry. Signed-off-by: NIIBE Yutaka <gniibe@fsij.org>	2019-12-27 09:26:29 +09:00
NIIBE Yutaka	4f7da4812e	chopstx_poll: More change. Signed-off-by: NIIBE Yutaka <gniibe@fsij.org>	2019-12-27 09:24:51 +09:00
NIIBE Yutaka	50a5951422	Fix chopstx_poll for condition variables, check after woken up. Signed-off-by: NIIBE Yutaka <gniibe@fsij.org>	2019-12-27 09:18:11 +09:00
NIIBE Yutaka	8b4ecad359	example-cdc,etc.: Bug fix of examples. Signed-off-by: NIIBE Yutaka <gniibe@fsij.org>	2019-12-20 14:40:45 +09:00
NIIBE Yutaka	fe451d6d8a	Add a ChangeLog entry for USB fix. Signed-off-by: NIIBE Yutaka <gniibe@fsij.org>	2019-12-20 08:31:27 +09:00
NIIBE Yutaka	3507027e98	Fix EP0 receiving more packets. Signed-off-by: NIIBE Yutaka <gniibe@fsij.org>	2019-12-20 08:30:49 +09:00
NIIBE Yutaka	746388331c	Fix GNU/Linux emulation about termination of a thread. Signed-off-by: NIIBE Yutaka <gniibe@fsij.org>	2019-12-04 13:47:29 +09:00
NIIBE Yutaka	6ce92cc0e8	Add rules for RISC-V. Signed-off-by: NIIBE Yutaka <gniibe@fsij.org>	2019-12-03 13:47:55 +09:00
NIIBE Yutaka	6e1c791b04	Add example-lcd for Longan nano board. Signed-off-by: NIIBE Yutaka <gniibe@fsij.org>	2019-12-03 13:41:17 +09:00
NIIBE Yutaka	1dbd9811c2	Factoring of USART driver for GD32VF103.	2019-12-03 13:38:47 +09:00
NIIBE Yutaka	2de23d5fd6	Add missing spi.h. Signed-off-by: NIIBE Yutaka <gniibe@fsij.org>	2019-12-03 13:33:40 +09:00
NIIBE Yutaka	07d1911c2b	Add Longan Nano support. Signed-off-by: NIIBE Yutaka <gniibe@fsij.org>	2019-12-03 13:30:42 +09:00
NIIBE Yutaka	214066fd82	Add RISC-V 32 IMAC support. Signed-off-by: NIIBE Yutaka <gniibe@fsij.org>	2019-12-03 13:27:16 +09:00
NIIBE Yutaka	51f2ca841f	Add SPI driver. Signed-off-by: NIIBE Yutaka <gniibe@fsij.org>	2019-12-03 13:18:49 +09:00
NIIBE Yutaka	1978ca25b6	Merge the change in RISC-V branch. Signed-off-by: NIIBE Yutaka <gniibe@fsij.org>	2019-12-03 13:15:56 +09:00
NIIBE Yutaka	913266d6e4	Include arch specific header and implementation by ARCH. Signed-off-by: NIIBE Yutaka <gniibe@fsij.org>	2019-12-03 13:09:25 +09:00
NIIBE Yutaka	de301bf025	Merge the change for GNU/Linux from riscv branch. Signed-off-by: NIIBE Yutaka <gniibe@fsij.org>	2019-11-25 09:53:50 +09:00
NIIBE Yutaka	823ebe222c	Rename to preempted_context_switch (GNU/Linux). Signed-off-by: NIIBE Yutaka <gniibe@fsij.org>	2019-11-22 08:55:01 +09:00
NIIBE Yutaka	2841efd9e5	Add an idea of chopstx_critical. Signed-off-by: NIIBE Yutaka <gniibe@fsij.org>	2019-11-22 08:55:01 +09:00
NIIBE Yutaka	b17834876f	Fix the previous commit. Signed-off-by: NIIBE Yutaka <gniibe@fsij.org>	2019-11-21 15:04:40 +09:00
NIIBE Yutaka	86c21fbf5c	Common chx_sched and arch specific voluntary_context_switch. Signed-off-by: NIIBE Yutaka <gniibe@fsij.org>	2019-11-21 12:37:02 +09:00
NIIBE Yutaka	bbb952429a	Fix the previous change. Signed-off-by: NIIBE Yutaka <gniibe@fsij.org>	2019-11-21 11:30:44 +09:00
NIIBE Yutaka	cffc8bf96c	Removal of CHOPSTX_PRIO_INHIBIT_PREEMPTION. Signed-off-by: NIIBE Yutaka <gniibe@fsij.org>	2019-11-21 10:35:14 +09:00