deon/gnuk
1
0
Fork 0
Code Issues Pull Requests Projects Releases Wiki Activity

remove boards/STBEE as it's supported now

Browse Source
This commit is contained in:
NIIBE Yutaka
2013-11-26 17:03:28 +09:00
parent 4816ed8b69
commit a635b626f5
3 changed files with 0 additions and 354 deletions
Download Patch File Download Diff File Expand all files Collapse all files

129
boards/STBEE/board.c
View File

@@ -1,129 +0,0 @@
#include "config.h"
#include "ch.h"
#include "hal.h"
/*
* Board-specific initialization code.
*/
void boardInit(void)
{
#if defined(PINPAD_CIR_SUPPORT)
/* EXTI0 <= PB0 */
AFIO->EXTICR[0] = AFIO_EXTICR1_EXTI0_PB;
EXTI->IMR = 0;
EXTI->FTSR = EXTI_FTSR_TR0;
NVICEnableVector(EXTI0_IRQn,
CORTEX_PRIORITY_MASK(CORTEX_MINIMUM_PRIORITY));
/* TIM3 */
RCC->APB1ENR |= RCC_APB1ENR_TIM3EN;
RCC->APB1RSTR = RCC_APB1RSTR_TIM3RST;
RCC->APB1RSTR = 0;
NVICEnableVector(TIM3_IRQn,
CORTEX_PRIORITY_MASK(CORTEX_MINIMUM_PRIORITY));
TIM3->CR1 = TIM_CR1_URS | TIM_CR1_ARPE; /* Don't enable TIM3 for now */
TIM3->CR2 = TIM_CR2_TI1S;
TIM3->SMCR = TIM_SMCR_TS_0 | TIM_SMCR_TS_2 | TIM_SMCR_SMS_2;
TIM3->DIER = 0; /* Disable interrupt for now */
TIM3->CCMR1 = TIM_CCMR1_CC1S_0 | TIM_CCMR1_IC1F_0 | TIM_CCMR1_IC1F_3
| TIM_CCMR1_CC2S_1 | TIM_CCMR1_IC2F_0 | TIM_CCMR1_IC2F_3;
TIM3->CCMR2 = 0;
TIM3->CCER = TIM_CCER_CC1E | TIM_CCER_CC2E | TIM_CCER_CC2P;
TIM3->PSC = 72 - 1; /* 1 MHz */
TIM3->ARR = 18000; /* 18 ms */
/* Generate UEV to upload PSC and ARR */
TIM3->EGR = TIM_EGR_UG;
#elif defined(PINPAD_DIAL_SUPPORT)
/* EXTI2 <= PB2 */
AFIO->EXTICR[0] = AFIO_EXTICR1_EXTI2_PB;
EXTI->IMR = 0;
EXTI->FTSR = EXTI_FTSR_TR2;
NVICEnableVector(EXTI2_IRQn,
CORTEX_PRIORITY_MASK(CORTEX_MINIMUM_PRIORITY));
/* TIM4 */
RCC->APB1ENR |= RCC_APB1ENR_TIM4EN;
RCC->APB1RSTR = RCC_APB1RSTR_TIM4RST;
RCC->APB1RSTR = 0;
TIM4->CR1 = TIM_CR1_URS | TIM_CR1_ARPE | TIM_CR1_CKD_1;
TIM4->CR2 = 0;
TIM4->SMCR = TIM_SMCR_SMS_0;
TIM4->DIER = 0; /* no interrupt */
TIM4->CCMR1 = TIM_CCMR1_CC1S_0 | TIM_CCMR1_CC2S_0
| TIM_CCMR1_IC1F_0 | TIM_CCMR1_IC1F_1 | TIM_CCMR1_IC1F_2 | TIM_CCMR1_IC1F_3
| TIM_CCMR1_IC2F_0 | TIM_CCMR1_IC2F_1 | TIM_CCMR1_IC2F_2 | TIM_CCMR1_IC2F_3;
TIM4->CCMR2 = 0;
TIM4->CCER = 0;
TIM4->PSC = 0;
TIM4->ARR = 31;
/* Generate UEV to upload PSC and ARR */
TIM4->EGR = TIM_EGR_UG;
#endif
}
#if defined(PINPAD_CIR_SUPPORT)
void
cir_ext_disable (void)
{
EXTI->PR = EXTI_PR_PR0;
EXTI->IMR &= ~EXTI_IMR_MR0;
}
void
cir_ext_enable (void)
{
EXTI->IMR |= EXTI_IMR_MR0;
}
extern void cir_ext_interrupt (void);
extern void cir_timer_interrupt (void);
CH_IRQ_HANDLER (EXTI0_IRQHandler)
{
CH_IRQ_PROLOGUE ();
chSysLockFromIsr ();
cir_ext_interrupt ();
chSysUnlockFromIsr ();
CH_IRQ_EPILOGUE ();
}
CH_IRQ_HANDLER (TIM3_IRQHandler)
{
CH_IRQ_PROLOGUE();
chSysLockFromIsr();
cir_timer_interrupt ();
chSysUnlockFromIsr();
CH_IRQ_EPILOGUE();
}
#elif defined(PINPAD_DIAL_SUPPORT)
void
dial_sw_disable (void)
{
EXTI->PR = EXTI_PR_PR2;
EXTI->IMR &= ~EXTI_IMR_MR2;
}
void
dial_sw_enable (void)
{
EXTI->IMR |= EXTI_IMR_MR2;
}
extern void dial_sw_interrupt (void);
CH_IRQ_HANDLER (EXTI2_IRQHandler)
{
CH_IRQ_PROLOGUE ();
chSysLockFromIsr ();
dial_sw_interrupt ();
chSysUnlockFromIsr ();
CH_IRQ_EPILOGUE ();
}
#endif

211
boards/STBEE/board.h
View File

@@ -1,211 +0,0 @@
/*
ChibiOS/RT - Copyright (C) 2006,2007,2008,2009,2010 Giovanni Di Sirio.
This file is part of ChibiOS/RT.
ChibiOS/RT is free software; you can redistribute it and/or modify
it under the terms of the GNU General Public License as published by
the Free Software Foundation; either version 3 of the License, or
(at your option) any later version.
ChibiOS/RT is distributed in the hope that it will be useful,
but WITHOUT ANY WARRANTY; without even the implied warranty of
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
GNU General Public License for more details.
You should have received a copy of the GNU General Public License
along with this program. If not, see <http://www.gnu.org/licenses/>.
---
A special exception to the GPL can be applied should you wish to distribute
a combined work that includes ChibiOS/RT, without being obliged to provide
the source code for any proprietary components. See the file exception.txt
for full details of how and when the exception can be applied.
*/
#ifndef _BOARD_H_
#define _BOARD_H_
#include "config.h"
/*
* Setup for the STBee board.
*/
#define SET_USB_CONDITION(en) (!en) /* To connect USB, call palClearPad */
#define SET_LED_CONDITION(on) (!on) /* To emit light, call palClearPad */
#define GPIO_USB GPIOD_USB_ENABLE
#define IOPORT_USB GPIOD
#define GPIO_LED GPIOD_LED1
#define IOPORT_LED GPIOD
/* NeuG settings for ADC2. */
#define NEUG_ADC_SETTING2_SMPR1 ADC_SMPR1_SMP_AN10(ADC_SAMPLE_1P5) \
| ADC_SMPR1_SMP_AN11(ADC_SAMPLE_1P5)
#define NEUG_ADC_SETTING2_SMPR2 0
#define NEUG_ADC_SETTING2_SQR3 ADC_SQR3_SQ1_N(ADC_CHANNEL_IN10) \
| ADC_SQR3_SQ2_N(ADC_CHANNEL_IN11)
#define NEUG_ADC_SETTING2_NUM_CHANNELS 2
/*
* Board identifier.
*/
#define BOARD_STBEE
#define BOARD_NAME "STBee"
#if defined(PINPAD_CIR_SUPPORT) || defined(PINPAD_DIAL_SUPPORT)
#define HAVE_7SEGLED 1
/*
* Timer assignment for CIR
*/
#define TIMx TIM3
#endif
/*
* Board frequencies.
*/
#define STM32_LSECLK 32768
#define STM32_HSECLK 12000000
/*
* MCU type, this macro is used by both the ST library and the ChibiOS/RT
* native STM32 HAL.
*/
#define STM32F10X_HD
/*
* IO pins assignments.
*/
#define GPIOD_LED1 4
#define GPIOD_USB_ENABLE 3
#define GPIOA_USER 0
/*
* I/O ports initial setup, this configuration is established soon after reset
* in the initialization code.
*
* The digits have the following meaning:
* 0 - Analog input.
* 1 - Push Pull output 10MHz.
* 2 - Push Pull output 2MHz.
* 3 - Push Pull output 50MHz.
* 4 - Digital input.
* 5 - Open Drain output 10MHz.
* 6 - Open Drain output 2MHz.
* 7 - Open Drain output 50MHz.
* 8 - Digital input with PullUp or PullDown resistor depending on ODR.
* 9 - Alternate Push Pull output 10MHz.
* A - Alternate Push Pull output 2MHz.
* B - Alternate Push Pull output 50MHz.
* C - Reserved.
* D - Alternate Open Drain output 10MHz.
* E - Alternate Open Drain output 2MHz.
* F - Alternate Open Drain output 50MHz.
* Please refer to the STM32 Reference Manual for details.
*/
#if defined(PINPAD_CIR_SUPPORT) || defined(PINPAD_DIAL_SUPPORT)
/*
* Port A setup.
* PA6 - (TIM3_CH1) input with pull-up
* PA7 - (TIM3_CH2) input with pull-down
* PA11 - input with pull-up (USBDM)
* PA12 - input with pull-up (USBDP)
* Everything input with pull-up except:
* PA0 - Normal input.
*/
#define VAL_GPIOACRL 0x88888884 /* PA7...PA0 */
#define VAL_GPIOACRH 0x88888888 /* PA15...PA8 */
#define VAL_GPIOAODR 0xFFFFFF7F
/* Port B setup. */
#define GPIOB_CIR 0
#define GPIOB_BUTTON 2
#define GPIOB_ROT_A 6
#define GPIOB_ROT_B 7
#define GPIOB_7SEG_DP 15
#define GPIOB_7SEG_A 14
#define GPIOB_7SEG_B 13
#define GPIOB_7SEG_C 12
#define GPIOB_7SEG_D 11
#define GPIOB_7SEG_E 10
#define GPIOB_7SEG_F 9
#define GPIOB_7SEG_G 8
#define VAL_GPIOBCRL 0x88888888 /* PB7...PB0 */
#define VAL_GPIOBCRH 0x66666666 /* PB15...PB8 */
#define VAL_GPIOBODR 0xFFFFFFFF
#else
/*
* Port A setup.
* PA11 - input with pull-up (USBDM)
* PA12 - input with pull-up (USBDP)
* Everything input with pull-up except:
* PA0 - Normal input.
*/
#define VAL_GPIOACRL 0x88888884 /* PA7...PA0 */
#define VAL_GPIOACRH 0x88888888 /* PA15...PA8 */
#define VAL_GPIOAODR 0xFFFFFFFF
/* Port B setup. */
/* Everything input with pull-up */
#define VAL_GPIOBCRL 0x88888888 /* PB7...PB0 */
#define VAL_GPIOBCRH 0x88888888 /* PB15...PB8 */
#define VAL_GPIOBODR 0xFFFFFFFF
#endif
/*
* Port C setup.
* PC0 - Digital input with PullUp. AN10 for NeuG
* PC1 - Digital input with PullUp. AN11 for NeuG
* Everything input with pull-up except:
*/
#define VAL_GPIOCCRL 0x88888888 /* PC7...PC0 */
#define VAL_GPIOCCRH 0x88888888 /* PC15...PC8 */
#define VAL_GPIOCODR 0xFFFFFFFF
/*
* Port D setup.
* Everything input with pull-up except:
* PD3 - Push pull output (USB_DISC 1:USB-DISABLE 0:USB-ENABLE) 2MHz
* PD4 - Open Drain output 2MHz (LED1).
*/
#define VAL_GPIODCRL 0x88862888 /* PD7...PD0 */
#define VAL_GPIODCRH 0x88888888 /* PD15...PD8 */
#define VAL_GPIODODR 0xFFFFFFFF
/*
* Port E setup.
* Everything input with pull-up except:
*/
#define VAL_GPIOECRL 0x88888888 /* PE7...PE0 */
#define VAL_GPIOECRH 0x88888888 /* PE15...PE8 */
#define VAL_GPIOEODR 0xFFFFFFFF
/*
* Port F setup.
* Everything input with pull-up except:
*/
#define VAL_GPIOFCRL 0x88888888 /* PF7...PF0 */
#define VAL_GPIOFCRH 0x88888888 /* PF15...PF8 */
#define VAL_GPIOFODR 0xFFFFFFFF
/*
* Port G setup.
* Everything input with pull-up except:
*/
#define VAL_GPIOGCRL 0x88888888 /* PG7...PG0 */
#define VAL_GPIOGCRH 0x88888888 /* PG15...PG8 */
#define VAL_GPIOGODR 0xFFFFFFFF
#if !defined(_FROM_ASM_)
#ifdef __cplusplus
extern "C" {
#endif
void boardInit(void);
#ifdef __cplusplus
}
#endif
#endif /* _FROM_ASM_ */
#endif /* _BOARD_H_ */

14
boards/STBEE/mcuconf.h
View File

@@ -1,14 +0,0 @@
/*
* HAL driver system settings.
*/
#define STM32_SW STM32_SW_PLL
#define STM32_PLLSRC STM32_PLLSRC_HSE
#define STM32_PLLXTPRE STM32_PLLXTPRE_DIV1
#define STM32_PLLMUL_VALUE 6
#define STM32_HPRE STM32_HPRE_DIV1
#define STM32_PPRE1 STM32_PPRE1_DIV2
#define STM32_PPRE2 STM32_PPRE2_DIV1
#define STM32_ADCPRE STM32_ADCPRE_DIV6
#define STM32_RTCSEL STM32_RTCSEL_NOCLOCK
#include "mcuconf-common.h"