deon/chopstx
1
0
Fork 0
Code Issues Pull Requests Projects Releases Wiki Activity

Add support for CQ STARM.

Browse Source
This commit is contained in:
NIIBE Yutaka
2015-06-29 15:59:30 +09:00
parent 97b4471cee
commit 6665723154
2 changed files with 49 additions and 0 deletions
Download Patch File Download Diff File Expand all files Collapse all files

3
ChangeLog
View File

@@ -1,7 +1,10 @@
2015-06-29 Niibe Yutaka <gniibe@fsij.org>
* board/board-cq-starm.h: New for CQ STARM.
* clk_gpio_init.c (gpio_init): LED is mandatory, but USB enabler
is optional.
* board/*.h: Update.
2015-06-22 Niibe Yutaka <gniibe@fsij.org>

46
board/board-cq-starm.h Normal file
View File

@@ -0,0 +1,46 @@
#define FLASH_PAGE_SIZE 1024
#define STM32_PLLXTPRE STM32_PLLXTPRE_DIV1
#define STM32_PLLMUL_VALUE 9
#define STM32_HSECLK 8000000
#define GPIO_LED_BASE GPIOC_BASE
#define GPIO_LED_SET_TO_EMIT 6
#undef GPIO_USB_BASE
#undef GPIO_USB_CLEAR_TO_ENABLE
#define GPIO_OTHER_BASE GPIOA_BASE
/*
* Port A setup.
* PA0 - input with pull-up. AN0
* PA1 - input with pull-up. AN1
* PA11 - Push Pull output 10MHz 0 default (until USB enabled) (USBDM)
* PA12 - Push Pull output 10MHz 0 default (until USB enabled) (USBDP)
* ------------------------ Default
* PAx - input with pull-up
*/
#define VAL_GPIO_OTHER_ODR 0xFFFFE7FF
#define VAL_GPIO_OTHER_CRL 0x88888888 /* PA7...PA0 */
#define VAL_GPIO_OTHER_CRH 0x88811888 /* PA15...PA8 */
/*
* Port C setup.
* PC0 - Push Pull output 50MHz.
* PC1 - Push Pull output 50MHz.
* Everything input with pull-up except:
* PC4 - Normal input (ADC_IN14 : VoutY of LIS344ALH).
* PC5 - Normal input (ADC_IN15 : VoutZ of LIS344ALH).
* PC6 - Push Pull output (LED).
* (PC9 - SDCard CD)
* (PC12 - SDCard CS)
* PC14 - Normal input (XTAL).
* PC15 - Normal input (XTAL).
*/
#define VAL_GPIO_LED_CRL 0x83448833 /* PC7...PC0 */
#define VAL_GPIO_LED_CRH 0x44888888 /* PC15...PC8 */
#define VAL_GPIO_LED_ODR 0xFFFFFFFF
#define RCC_ENR_IOP_EN (RCC_APB2ENR_IOPAEN|RCC_APB2ENR_IOPCEN)
#define RCC_RSTR_IOP_RST (RCC_APB2RSTR_IOPARST|RCC_APB2RSTR_IOPCRST)
/* NeuG settings for ADC2 is default (PA0: Analog IN0, PA1: Analog IN1). */