deon/chopstx
1
0
Fork 0
Code Issues Pull Requests Projects Releases Wiki Activity

update board-*.h

Browse Source
This commit is contained in:
NIIBE Yutaka
2013-06-06 10:56:17 +09:00
parent 5540f9b08a
commit 60e0fbd189
4 changed files with 77 additions and 6 deletions
Download Patch File Download Diff File Expand all files Collapse all files

29
board/board-fst-01-00.h Normal file
View File

@@ -0,0 +1,29 @@
#define STM32_PLLXTPRE STM32_PLLXTPRE_DIV1
#define STM32_PLLMUL_VALUE 9
#define STM32_HSECLK 8000000
#define GPIO_USB_SET_TO_ENABLE 10
#define GPIO_LED_SET_TO_EMIT 8
/*
* Port A setup.
* PA0 - input with pull-up. AN0
* PA1 - input with pull-up. AN1
* PA8 - Push pull output 50MHz (LED 1:ON 0:OFF)
* PA10 - Push pull output 50MHz (USB 1:ON 0:OFF)
* PA11 - Push Pull output 10MHz 0 default (until USB enabled) (USBDM)
* PA12 - Push Pull output 10MHz 0 default (until USB enabled) (USBDP)
* ------------------------ Default
* PAx - input with pull-up
*/
#define VAL_GPIO_ODR 0xFFFFE7FF
#define VAL_GPIO_CRL 0x88888888 /* PA7...PA0 */
#define VAL_GPIO_CRH 0x88811383 /* PA15...PA8 */
#define GPIO_USB_BASE GPIOA_BASE
#define GPIO_LED_BASE GPIOA_BASE
#define RCC_APB2ENR_IOP_EN RCC_APB2ENR_IOPAEN
#define RCC_APB2RSTR_IOP_RST RCC_APB2RSTR_IOPARST
/* NeuG settings for ADC2 is default (PA0: Analog IN0, PA1: Analog IN1). */

27
board/board-fst-01.h
View File

@@ -5,10 +5,37 @@
#define GPIO_USB_SET_TO_ENABLE 10
#define GPIO_LED_SET_TO_EMIT 0
/*
* Port A setup.
* PA0 - input with pull-up (TIM2_CH1): AN0 for NeuG
* PA1 - input with pull-down (TIM2_CH2)
* PA2 - input with pull-up (TIM2_CH3) connected to CIR module
* PA3 - input with pull-up: external pin available to user
* PA4 - Push pull output (SPI1_NSS)
* PA5 - Alternate Push pull output (SPI1_SCK)
* PA6 - Alternate Push pull output (SPI1_MISO)
* PA7 - Alternate Push pull output (SPI1_MOSI)
* PA10 - Push pull output (USB 1:ON 0:OFF)
* PA11 - Push Pull output 10MHz 0 default (until USB enabled) (USBDM)
* PA12 - Push Pull output 10MHz 0 default (until USB enabled) (USBDP)
* ------------------------ Default
* PA8 - input with pull-up.
* PA9 - input with pull-up.
* PA13 - input with pull-up.
* PA14 - input with pull-up.
* PA15 - input with pull-up.
*/
#define VAL_GPIO_ODR 0xFFFFE7FD
#define VAL_GPIO_CRL 0xBBB38888 /* PA7...PA0 */
#define VAL_GPIO_CRH 0x88811388 /* PA15...PA8 */
/*
* Port B setup.
* PB0 - Push pull output (LED 1:ON 0:OFF)
* PB1 - input with pull-up: AN9 for NeuG
* ------------------------ Default
* PBx - input with pull-up.
*/
#define VAL_GPIO_LED_ODR 0xFFFFFFFF
#define VAL_GPIO_LED_CRL 0x88888883 /* PA7...PA0 */
#define VAL_GPIO_LED_CRH 0x88888888 /* PA15...PA8 */

15
board/board-olimex-stm32-h103.h
View File

@@ -6,12 +6,15 @@
#define GPIO_LED_CLEAR_TO_EMIT 12
/*
* PC0 - Digital input with PullUp. AN10 for NeuG
* PC1 - Digital input with PullUp. AN11 for NeuG
* PC6 - Normal input because there is an external resistor.
* PC7 - Normal input because there is an external resistor.
* PC11 - Open Drain output (USB disconnect).
* PC12 - Push Pull output (LED).
* Port C setup.
* PC0 - input with pull-up. AN10 for NeuG
* PC1 - input with pull-up. AN11 for NeuG
* PC6 - input without pull-up/down
* PC7 - input without pull-up/down
* PC11 - Open-drain output 50MHz (USB disconnect).
* PC12 - Push Pull output 50MHz (LED).
* ------------------------ Default
* PCx - input with pull-up
*/
#define VAL_GPIO_ODR 0xFFFFFFFF
#define VAL_GPIO_CRL 0x44888888 /* PC7...PC0 */

12
board/board-stm8s-discovery.h
View File

@@ -5,6 +5,16 @@
#undef GPIO_USB_CLEAR_TO_ENABLE
#define GPIO_LED_SET_TO_EMIT 8
/*
* Port A setup.
* PA0 - input with pull-up. AN0
* PA1 - input with pull-up. AN1
* PA8 - Push pull output 10MHz (LED 1:ON 0:OFF)
* PA11 - Push Pull output 10MHz 0 default (until USB enabled) (USBDM)
* PA12 - Push Pull output 10MHz 0 default (until USB enabled) (USBDP)
* ------------------------ Default
* PAx - input with pull-up
*/
#define VAL_GPIO_ODR 0xFFFFE7FF
#define VAL_GPIO_CRL 0x88888888 /* PA7...PA0 */
#define VAL_GPIO_CRH 0x88811881 /* PA15...PA8 */
@@ -14,3 +24,5 @@
#define RCC_APB2ENR_IOP_EN (RCC_APB2ENR_IOPAEN)
#define RCC_APB2RSTR_IOP_RST (RCC_APB2RSTR_IOPARST)
/* NeuG settings for ADC2 is default (PA0: Analog IN0, PA1: Analog IN1). */