add an entry in NEWS

.gitignore

@@ -14,3 +14,4 @@ src/*.inc
 regnual/regnual.bin
 regnual/regnual.hex
 regnual/regnual.elf
+doc/_build

ChangeLog

@@ -1,3 +1,45 @@
+2012-07-21  Niibe Yutaka  <gniibe@fsij.org>
+
+	* Version 1.0.
+	* src/usb_desc.c (gnukStringSerial): Updated.
+
+	Documentation by Sphinx.
+	* doc/Makefile: New.
+	* doc/note: Old notes are moved here.
+
+2012-07-20  Niibe Yutaka  <gniibe@fsij.org>
+
+	* test/features/002_get_data_static.feature: Support CERTDO enabled
+	Gnuk for the test of extended capabilities.
+	* test/features/802_get_data_static.feature: Ditto.
+	* test/features/402_get_data_static.feature: Ditto.
+
+2012-07-10  Niibe Yutaka  <gniibe@fsij.org>
+
+	* test/features/*: Add test cases for PW1/PW3 of factory settings.
+
+	* test/features/202_keygen.feature: Add PSO signature test after
+	keygen.
+	* test/features/602_keygen.feature: Ditto.
+
+	Bug fix.
+	* src/openpgp-do.c (gpg_do_write_prvkey): Don't call ac_reset_*
+	here.
+	(proc_key_import): But call ac_reset_* here.
+	(gpg_do_keygen): Load private key for signing.
+
+	* tool/stlinkv2.py (stlinkv2.usb_disconnect): New.
+
+2012-07-09  Niibe Yutaka  <gniibe@fsij.org>
+
+	* src/openpgp.c (cmd_pso): For decryption, return error sooner for
+	invalid data.
+
+	* tool/stlinkv2.py (stlinkv2.setup_gpio): Fix GPIOB_CRL.
+
+	* test/rsa_keys.py (integer_to_bytes_256): Rename from
+	integer_to_bytes and it should be exactly 256-byte long.
+
 2012-07-06  Niibe Yutaka  <gniibe@fsij.org>
 
 	* Version 0.21.

NEWS

@@ -1,5 +1,12 @@
 Gnuk NEWS - User visible changes
 
+* Major changes in Gnuk 1.0
+
+  Released 2012-07-21, by NIIBE Yutaka
+
+This is bug fixes only release.
+
+
 * Major changes in Gnuk 0.21
 
   Released 2012-07-06, by NIIBE Yutaka

README

@@ -1,7 +1,7 @@
 Gnuk - An Implementation of USB Cryptographic Token for GnuPG
 
-							   Version 0.21
-							     2012-07-06
+							    Version 1.0
+							     2012-07-21
 							   Niibe Yutaka
 				      Free Software Initiative of Japan
 
@@ -30,11 +30,7 @@ Q0: How Gnuk USB Token is superior than other solutions (OpenPGP
     card 2.0, GPF Crypto Stick, etc.) ?
     http://www.g10code.de/p-card.html
     http://www.privacyfoundation.de/crypto_stick/
-A0: IMRHO, not quite, since there is no ready-to-use out-of-box Gnuk
-    product yet.  (It is welcome for me that some vendor will
-    manufacture Gnuk USB Token.  Even I can help design of hardware,
-    if needed.)
-    Good points for Gnuk are:
+A0: Good points of Gnuk are:
     * If you have skill of electronics and like DIY, you can build
       Gnuk Token cheaper (see Q8-A8).
     * You can study Gnuk to modify and to enhance.  For example, you
@@ -60,7 +56,7 @@ A3: Orthodox choice is Olimex STM32-H103.
 
 Q4: What's version of GnuPG are you using?
 A4: In Debian GNU/Linux system, I use gnupg 1.4.11-3 and gnupg-agent
-    2.0.14-2 (in sid).  With older versions, you can only sign with SHA1.
+    2.0.18-2.  With older versions, you can only sign with SHA1.
     See: http://www.fsij.org/gnuk/gnupg2-fixes-needed
 
 Q5: What's version of pcscd and libccid are you using?
@@ -83,12 +79,17 @@ A8: STM8S Discovery Kit costs 750 JPY (< $10 USD) only.  You can build
     http://www.fsij.org/gnuk/jtag_dongle_ftdi2232
 
 Q9: I got an error like "gpg: selecting openpgp failed: ec=6.108", what's up?
+
 A9: GnuPG's SCDaemon has problems for handling insertion/removal of
-    card/reader (problems are fixed in trunk).  When your newly
-    inserted token is not found by GnuPG, try killing scdaemon and let
-    it to be invoked again.  I do:
+    card/reader (problems are fixed in trunk, and backported to 2.0
+    branch, it will be 2.0.20).  When your newly inserted token is not
+    found by GnuPG, try killing scdaemon and let it to be invoked
+    again.  I do:
+
 	 $ gpg-connect-agent "SCD KILLSCD" "SCD BYE" /bye
+
     and confirm scdaemon doesn't exist, then,
+
 	 $ gpg-connect-agent learn /bye
 
 Qa: With GNOME 2, I can't use Gnuk Token for SSH.  How can we use it for SSH?
@@ -107,16 +108,16 @@ Ab: That's because gnome-keyring-daemon interferes GnuPG.  Type:
 
 Qc: Do you know a good SWD debugger to connect FST-01 or something?
 Ac: STLink v2 is cheap one.  We have a tool/stlinkv2.py as flash ROM
-writer.
+writer program.
 
 
 Release notes
 =============
 
-This is another "version 1.0 release candidate" of Gnuk.  In this
-release, a test suite is added.  While it is daily use, some features
-(including key generation and firmware upgrade) are still considered
-experimental.
+This is version 1.0 release of Gnuk, after a year and eleven months
+development.  While it is daily use for a year or so, some newly
+introduced features (including key generation and firmware upgrade)
+should be considered experimental.
 
 Tested features are:
 
@@ -133,13 +134,16 @@ Tested features are:
 	* Changing value of password status bytes (0x00C4): forcesig
 	* Verify with pin pad
 	* Modify with pin pad
-	* Card holder certificate
-	* Removal of keys (Overriding key import is not supported,
+	* Card holder certificate (read)
+	* Removal of keys
+	  (Overriding key import is not supported,
 	  but you can remove all keys to import again).
 	* Key generation on device side
 
-Original feature of Gnuk, tested lightly:
+Original features of Gnuk, tested lightly:
 
+	* OpenPGP card serial number setup
+	* Card holder certificate (write by UPDATE BINARY)
 	* Upgrading with "EXTERNAL AUTHENTICATE" by reGNUal
 
 It is known not-working well:
@@ -148,11 +152,11 @@ It is known not-working well:
 	  work well.  Please make sure to disable DEBUG option if it
 	  doesn't work well.
 
-It is known that the combination libccid 1.4.1 (or newer) with libusb
-1.0.8 (or older) has a problem.  It is possible for USB communication
-to be failed, because of a bug in libusb implementation.  Use libusbx
-1.0.9 or newer, or don't use PC/SC, but use internal CCID driver of
-GnuPG.
+It is known that the combination of libccid 1.4.1 (or newer) with
+libusb 1.0.8 (or older) has a minor problem.  It is rare but it is
+possible for USB communication to be failed, because of a bug in
+libusb implementation.  Use libusbx 1.0.9 or newer, or don't use
+PC/SC, but use internal CCID driver of GnuPG.
 
 
 Targets
@@ -288,15 +292,16 @@ respect users' freedom for computing.  Please ask FSIJ for the
 license.
 
 Otherwise, companies which want to distribute Gnuk devices, please use
-your own USB vendor ID and product ID.  Note that please replace
-"FSIJ" in the string gnukStringSerial (usb_desc.c) to yours, when you
-modify Gnuk.
+your own USB vendor ID and product ID.  Please replace "FSIJ" in the
+string gnukStringSerial (usb_desc.c) to yours, when you modify Gnuk.
 
 
 Host Requirements
 =================
 
-For GNU/Linux, libccid version >= 1.3.11 is recommended.
+For GNU/Linux, PC/SC service is an option, you can use GnuPG's
+internal CCID driver instead.  If you chose using PC/SC service,
+libccid version >= 1.3.11 is recommended for GNU/Linux.
 
 I think that it should not be requirment but the kernel version of my use is:
 Linux version 2.6.32-5-686 (Debian 2.6.32-18) (ben@decadent.org.uk) (gcc version 4.3.5 (Debian 4.3.5-2) ) #1 SMP Sat Jul 24 02:27:10 UTC 2010
@@ -312,7 +317,7 @@ You need GNU toolchain and newlib for 'arm-none-eabi' target.
 
 See http://github.com/esden/summon-arm-toolchain/ (which includes fix
 of binutils-2.21.1) for preparation of GNU Toolchain for
-'arm-none-eabi' target.
+'arm-none-eabi' target.  This is for GCC 4.5.
 
 # Note that we need to link correct C library (for string functions).
 # For this purpose, Makefile.in contains following line:
@@ -328,6 +333,13 @@ of binutils-2.21.1) for preparation of GNU Toolchain for
 # -mno-thumb-interwork option.  This means that you should not
 # link C library which contains ARM (not Thumb) code.
 
+Recently, there is "gcc-arm-embedded" project.  See:
+
+    https://launchpad.net/gcc-arm-embedded/
+
+It is based on GCC 4.6.   For version 4.6-2012-q2-update, you'd
+need "-O3 -Os" instead of "-O2" and it will be slightly better.
+
 
 Change directory to `src':
 
@@ -582,7 +594,7 @@ RSA), you can import them.
 Gnuk supports key generation, but this feature is young and should be
 considered experimental.
 
-For detail, please see doc/DEMO and doc/DEMO-2.
+For detail, please see doc/note/DEMO and doc/note/DEMO-2.
 
 Note that it make sense to preserve your keys on your computer so that
 you can import the keys (again) to (possibly another) Gnuk Token.  In
@@ -644,7 +656,7 @@ linux/Documentation/usb/usbmon.txt
 Firmware update
 ===============
 
-See doc/firmware-update.
+See doc/note/firmware-update.
 
 
 Read-only Git Repository

boards/FST_01/board.h

@@ -101,10 +101,9 @@
  * PA5  - Alternate Push pull output (SPI1_SCK)
  * PA6  - Alternate Push pull output (SPI1_MISO)
  * PA7  - Alternate Push pull output (SPI1_MOSI)
+ * PA10 - Push pull output   (USB 1:ON 0:OFF)
  * PA11 - input with pull-up (USBDM)
  * PA12 - input with pull-up (USBDP)
- * Everything input with pull-up except:
- * PA10 - Push pull output   (USB 1:ON 0:OFF)
  */
 #define VAL_GPIOACRL            0xBBB38888      /*  PA7...PA0 */
 #define VAL_GPIOACRH            0x88888388      /* PA15...PA8 */

doc/Makefile

@@ -0,0 +1,153 @@
+# Makefile for Sphinx documentation
+#
+
+# You can set these variables from the command line.
+SPHINXOPTS    =
+SPHINXBUILD   = sphinx-build
+PAPER         = a4
+BUILDDIR      = _build
+
+# Internal variables.
+PAPEROPT_a4     = -D latex_paper_size=a4
+PAPEROPT_letter = -D latex_paper_size=letter
+ALLSPHINXOPTS   = -d $(BUILDDIR)/doctrees $(PAPEROPT_$(PAPER)) $(SPHINXOPTS) .
+# the i18n builder cannot share the environment and doctrees with the others
+I18NSPHINXOPTS  = $(PAPEROPT_$(PAPER)) $(SPHINXOPTS) .
+
+.PHONY: help clean html dirhtml singlehtml pickle json htmlhelp qthelp devhelp epub latex latexpdf text man changes linkcheck doctest gettext
+
+help:
+	@echo "Please use \`make <target>' where <target> is one of"
+	@echo "  html       to make standalone HTML files"
+	@echo "  dirhtml    to make HTML files named index.html in directories"
+	@echo "  singlehtml to make a single large HTML file"
+	@echo "  pickle     to make pickle files"
+	@echo "  json       to make JSON files"
+	@echo "  htmlhelp   to make HTML files and a HTML help project"
+	@echo "  qthelp     to make HTML files and a qthelp project"
+	@echo "  devhelp    to make HTML files and a Devhelp project"
+	@echo "  epub       to make an epub"
+	@echo "  latex      to make LaTeX files, you can set PAPER=a4 or PAPER=letter"
+	@echo "  latexpdf   to make LaTeX files and run them through pdflatex"
+	@echo "  text       to make text files"
+	@echo "  man        to make manual pages"
+	@echo "  texinfo    to make Texinfo files"
+	@echo "  info       to make Texinfo files and run them through makeinfo"
+	@echo "  gettext    to make PO message catalogs"
+	@echo "  changes    to make an overview of all changed/added/deprecated items"
+	@echo "  linkcheck  to check all external links for integrity"
+	@echo "  doctest    to run all doctests embedded in the documentation (if enabled)"
+
+clean:
+	-rm -rf $(BUILDDIR)/*
+
+html:
+	$(SPHINXBUILD) -b html $(ALLSPHINXOPTS) $(BUILDDIR)/html
+	@echo
+	@echo "Build finished. The HTML pages are in $(BUILDDIR)/html."
+
+dirhtml:
+	$(SPHINXBUILD) -b dirhtml $(ALLSPHINXOPTS) $(BUILDDIR)/dirhtml
+	@echo
+	@echo "Build finished. The HTML pages are in $(BUILDDIR)/dirhtml."
+
+singlehtml:
+	$(SPHINXBUILD) -b singlehtml $(ALLSPHINXOPTS) $(BUILDDIR)/singlehtml
+	@echo
+	@echo "Build finished. The HTML page is in $(BUILDDIR)/singlehtml."
+
+pickle:
+	$(SPHINXBUILD) -b pickle $(ALLSPHINXOPTS) $(BUILDDIR)/pickle
+	@echo
+	@echo "Build finished; now you can process the pickle files."
+
+json:
+	$(SPHINXBUILD) -b json $(ALLSPHINXOPTS) $(BUILDDIR)/json
+	@echo
+	@echo "Build finished; now you can process the JSON files."
+
+htmlhelp:
+	$(SPHINXBUILD) -b htmlhelp $(ALLSPHINXOPTS) $(BUILDDIR)/htmlhelp
+	@echo
+	@echo "Build finished; now you can run HTML Help Workshop with the" \
+	      ".hhp project file in $(BUILDDIR)/htmlhelp."
+
+qthelp:
+	$(SPHINXBUILD) -b qthelp $(ALLSPHINXOPTS) $(BUILDDIR)/qthelp
+	@echo
+	@echo "Build finished; now you can run "qcollectiongenerator" with the" \
+	      ".qhcp project file in $(BUILDDIR)/qthelp, like this:"
+	@echo "# qcollectiongenerator $(BUILDDIR)/qthelp/GnukDocumentation.qhcp"
+	@echo "To view the help file:"
+	@echo "# assistant -collectionFile $(BUILDDIR)/qthelp/GnukDocumentation.qhc"
+
+devhelp:
+	$(SPHINXBUILD) -b devhelp $(ALLSPHINXOPTS) $(BUILDDIR)/devhelp
+	@echo
+	@echo "Build finished."
+	@echo "To view the help file:"
+	@echo "# mkdir -p $$HOME/.local/share/devhelp/GnukDocumentation"
+	@echo "# ln -s $(BUILDDIR)/devhelp $$HOME/.local/share/devhelp/GnukDocumentation"
+	@echo "# devhelp"
+
+epub:
+	$(SPHINXBUILD) -b epub $(ALLSPHINXOPTS) $(BUILDDIR)/epub
+	@echo
+	@echo "Build finished. The epub file is in $(BUILDDIR)/epub."
+
+latex:
+	$(SPHINXBUILD) -b latex $(ALLSPHINXOPTS) $(BUILDDIR)/latex
+	@echo
+	@echo "Build finished; the LaTeX files are in $(BUILDDIR)/latex."
+	@echo "Run \`make' in that directory to run these through (pdf)latex" \
+	      "(use \`make latexpdf' here to do that automatically)."
+
+latexpdf:
+	$(SPHINXBUILD) -b latex $(ALLSPHINXOPTS) $(BUILDDIR)/latex
+	@echo "Running LaTeX files through pdflatex..."
+	$(MAKE) -C $(BUILDDIR)/latex all-pdf
+	@echo "pdflatex finished; the PDF files are in $(BUILDDIR)/latex."
+
+text:
+	$(SPHINXBUILD) -b text $(ALLSPHINXOPTS) $(BUILDDIR)/text
+	@echo
+	@echo "Build finished. The text files are in $(BUILDDIR)/text."
+
+man:
+	$(SPHINXBUILD) -b man $(ALLSPHINXOPTS) $(BUILDDIR)/man
+	@echo
+	@echo "Build finished. The manual pages are in $(BUILDDIR)/man."
+
+texinfo:
+	$(SPHINXBUILD) -b texinfo $(ALLSPHINXOPTS) $(BUILDDIR)/texinfo
+	@echo
+	@echo "Build finished. The Texinfo files are in $(BUILDDIR)/texinfo."
+	@echo "Run \`make' in that directory to run these through makeinfo" \
+	      "(use \`make info' here to do that automatically)."
+
+info:
+	$(SPHINXBUILD) -b texinfo $(ALLSPHINXOPTS) $(BUILDDIR)/texinfo
+	@echo "Running Texinfo files through makeinfo..."
+	make -C $(BUILDDIR)/texinfo info
+	@echo "makeinfo finished; the Info files are in $(BUILDDIR)/texinfo."
+
+gettext:
+	$(SPHINXBUILD) -b gettext $(I18NSPHINXOPTS) $(BUILDDIR)/locale
+	@echo
+	@echo "Build finished. The message catalogs are in $(BUILDDIR)/locale."
+
+changes:
+	$(SPHINXBUILD) -b changes $(ALLSPHINXOPTS) $(BUILDDIR)/changes
+	@echo
+	@echo "The overview file is in $(BUILDDIR)/changes."
+
+linkcheck:
+	$(SPHINXBUILD) -b linkcheck $(ALLSPHINXOPTS) $(BUILDDIR)/linkcheck
+	@echo
+	@echo "Link check complete; look for any errors in the above output " \
+	      "or in $(BUILDDIR)/linkcheck/output.txt."
+
+doctest:
+	$(SPHINXBUILD) -b doctest $(ALLSPHINXOPTS) $(BUILDDIR)/doctest
+	@echo "Testing of doctests in the sources finished, look at the " \
+	      "results in $(BUILDDIR)/doctest/output.txt."

doc/conf.py

@@ -0,0 +1,246 @@
+# -*- coding: utf-8 -*-
+#
+# Gnuk Documentation documentation build configuration file, created by
+# sphinx-quickstart on Wed Jul  4 15:29:05 2012.
+#
+# This file is execfile()d with the current directory set to its containing dir.
+#
+# Note that not all possible configuration values are present in this
+# autogenerated file.
+#
+# All configuration values have a default; values that are commented out
+# serve to show the default.
+
+import sys, os
+
+# If extensions (or modules to document with autodoc) are in another directory,
+# add these directories to sys.path here. If the directory is relative to the
+# documentation root, use os.path.abspath to make it absolute, like shown here.
+#sys.path.insert(0, os.path.abspath('.'))
+
+# -- General configuration -----------------------------------------------------
+
+# If your documentation needs a minimal Sphinx version, state it here.
+#needs_sphinx = '1.0'
+
+# Add any Sphinx extension module names here, as strings. They can be extensions
+# coming with Sphinx (named 'sphinx.ext.*') or your custom ones.
+extensions = ['sphinx.ext.intersphinx', 'sphinx.ext.todo', 'sphinx.ext.pngmath', 'sphinx.ext.mathjax', 'sphinx.ext.viewcode']
+
+# Add any paths that contain templates here, relative to this directory.
+templates_path = ['_templates']
+
+# The suffix of source filenames.
+source_suffix = '.rst'
+
+# The encoding of source files.
+#source_encoding = 'utf-8-sig'
+
+# The master toctree document.
+master_doc = 'index'
+
+# General information about the project.
+project = u'Gnuk Documentation'
+copyright = u'2012, Niibe Yutaka'
+
+# The version info for the project you're documenting, acts as replacement for
+# |version| and |release|, also used in various other places throughout the
+# built documents.
+#
+# The short X.Y version.
+version = '1.0'
+# The full version, including alpha/beta/rc tags.
+release = '1.0'
+
+# The language for content autogenerated by Sphinx. Refer to documentation
+# for a list of supported languages.
+#language = None
+
+# There are two options for replacing |today|: either, you set today to some
+# non-false value, then it is used:
+#today = ''
+# Else, today_fmt is used as the format for a strftime call.
+#today_fmt = '%B %d, %Y'
+
+# List of patterns, relative to source directory, that match files and
+# directories to ignore when looking for source files.
+exclude_patterns = ['_build']
+
+# The reST default role (used for this markup: `text`) to use for all documents.
+#default_role = None
+
+# If true, '()' will be appended to :func: etc. cross-reference text.
+#add_function_parentheses = True
+
+# If true, the current module name will be prepended to all description
+# unit titles (such as .. function::).
+#add_module_names = True
+
+# If true, sectionauthor and moduleauthor directives will be shown in the
+# output. They are ignored by default.
+#show_authors = False
+
+# The name of the Pygments (syntax highlighting) style to use.
+pygments_style = 'sphinx'
+
+# A list of ignored prefixes for module index sorting.
+#modindex_common_prefix = []
+
+
+# -- Options for HTML output ---------------------------------------------------
+
+# The theme to use for HTML and HTML Help pages.  See the documentation for
+# a list of builtin themes.
+html_theme = 'default'
+
+# Theme options are theme-specific and customize the look and feel of a theme
+# further.  For a list of options available for each theme, see the
+# documentation.
+#html_theme_options = {}
+
+# Add any paths that contain custom themes here, relative to this directory.
+#html_theme_path = []
+
+# The name for this set of Sphinx documents.  If None, it defaults to
+# "<project> v<release> documentation".
+#html_title = None
+
+# A shorter title for the navigation bar.  Default is the same as html_title.
+#html_short_title = None
+
+# The name of an image file (relative to this directory) to place at the top
+# of the sidebar.
+#html_logo = None
+
+# The name of an image file (within the static path) to use as favicon of the
+# docs.  This file should be a Windows icon file (.ico) being 16x16 or 32x32
+# pixels large.
+#html_favicon = None
+
+# Add any paths that contain custom static files (such as style sheets) here,
+# relative to this directory. They are copied after the builtin static files,
+# so a file named "default.css" will overwrite the builtin "default.css".
+html_static_path = ['_static']
+
+# If not '', a 'Last updated on:' timestamp is inserted at every page bottom,
+# using the given strftime format.
+#html_last_updated_fmt = '%b %d, %Y'
+
+# If true, SmartyPants will be used to convert quotes and dashes to
+# typographically correct entities.
+#html_use_smartypants = True
+
+# Custom sidebar templates, maps document names to template names.
+#html_sidebars = {}
+
+# Additional templates that should be rendered to pages, maps page names to
+# template names.
+#html_additional_pages = {}
+
+# If false, no module index is generated.
+#html_domain_indices = True
+
+# If false, no index is generated.
+#html_use_index = True
+
+# If true, the index is split into individual pages for each letter.
+#html_split_index = False
+
+# If true, links to the reST sources are added to the pages.
+#html_show_sourcelink = True
+
+# If true, "Created using Sphinx" is shown in the HTML footer. Default is True.
+#html_show_sphinx = True
+
+# If true, "(C) Copyright ..." is shown in the HTML footer. Default is True.
+#html_show_copyright = True
+
+# If true, an OpenSearch description file will be output, and all pages will
+# contain a <link> tag referring to it.  The value of this option must be the
+# base URL from which the finished HTML is served.
+#html_use_opensearch = ''
+
+# This is the file name suffix for HTML files (e.g. ".xhtml").
+#html_file_suffix = None
+
+# Output file base name for HTML help builder.
+htmlhelp_basename = 'GnukDocumentationdoc'
+
+
+# -- Options for LaTeX output --------------------------------------------------
+
+latex_elements = {
+# The paper size ('letterpaper' or 'a4paper').
+#'papersize': 'letterpaper',
+
+# The font size ('10pt', '11pt' or '12pt').
+#'pointsize': '10pt',
+
+# Additional stuff for the LaTeX preamble.
+#'preamble': '',
+}
+
+# Grouping the document tree into LaTeX files. List of tuples
+# (source start file, target name, title, author, documentclass [howto/manual]).
+latex_documents = [
+  ('index', 'GnukDocumentation.tex', u'Gnuk Documentation Documentation',
+   u'Niibe Yutaka', 'manual'),
+]
+
+# The name of an image file (relative to this directory) to place at the top of
+# the title page.
+#latex_logo = None
+
+# For "manual" documents, if this is true, then toplevel headings are parts,
+# not chapters.
+#latex_use_parts = False
+
+# If true, show page references after internal links.
+#latex_show_pagerefs = False
+
+# If true, show URL addresses after external links.
+#latex_show_urls = False
+
+# Documents to append as an appendix to all manuals.
+#latex_appendices = []
+
+# If false, no module index is generated.
+#latex_domain_indices = True
+
+
+# -- Options for manual page output --------------------------------------------
+
+# One entry per manual page. List of tuples
+# (source start file, name, description, authors, manual section).
+man_pages = [
+    ('index', 'gnukdocumentation', u'Gnuk Documentation Documentation',
+     [u'Niibe Yutaka'], 1)
+]
+
+# If true, show URL addresses after external links.
+#man_show_urls = False
+
+
+# -- Options for Texinfo output ------------------------------------------------
+
+# Grouping the document tree into Texinfo files. List of tuples
+# (source start file, target name, title, author,
+#  dir menu entry, description, category)
+texinfo_documents = [
+  ('index', 'GnukDocumentation', u'Gnuk Documentation Documentation',
+   u'Niibe Yutaka', 'GnukDocumentation', 'One line description of project.',
+   'Miscellaneous'),
+]
+
+# Documents to append as an appendix to all manuals.
+#texinfo_appendices = []
+
+# If false, no module index is generated.
+#texinfo_domain_indices = True
+
+# How to display URL addresses: 'footnote', 'no', or 'inline'.
+#texinfo_show_urls = 'footnote'
+
+
+# Example configuration for intersphinx: refer to the Python standard library.
+intersphinx_mapping = {'http://docs.python.org/': None}

doc/development.rst

@@ -0,0 +1,60 @@
+Development Environment
+=======================
+
+
+Hardware
+--------
+
+JTAG debugger or SWD debugger is required.
+
+
+GNU Toolchain
+-------------
+
+You need GNU toolchain and newlib for 'arm-none-eabi' target.
+
+See http://github.com/esden/summon-arm-toolchain/ (which includes fix
+of binutils-2.21.1) for preparation of GNU Toolchain for
+'arm-none-eabi' target.  This is for GCC 4.5.
+
+Note that we need to link correct C library (for string functions).
+For this purpose, our src/Makefile.in contains following line:
+
+	MCFLAGS= -mcpu=$(MCU) -mfix-cortex-m3-ldrd
+
+This should not be needed (as -mcpu=cortex-m3 means
+-mfix-cortex-m3-ldrd), but it is needed for the configuration of
+patch-gcc-config-arm-t-arm-elf.diff in summon-arm-toolchain in practice.
+
+In ChibiOS_2.0.8/os/ports/GCC/ARM/rules.mk, it specifies
+-mno-thumb-interwork option.  This means that you should not link C
+library which contains ARM (not Thumb) code.
+
+Recently, there is "gcc-arm-embedded" project.  See:
+https://launchpad.net/gcc-arm-embedded/
+
+It is based on GCC 4.6.   For version 4.6-2012-q2-update, you'd
+need "-O3 -s" instead of "-O2" and it will be slightly better.
+
+
+
+Building Gnuk
+-------------
+
+Change directory to ``src``:
+
+  $ cd gnuk-VERSION/src
+
+Then, run ``configure``:
+
+  $ ./configure --vidpid=<VID:PID>
+
+Here, you need to specify USB vendor ID and product ID.  For FSIJ's,
+it's: --vidpid=234b:0000 .  Please read section 'USB vendor ID and
+product ID' above.
+
+Type:
+
+  $ make
+
+Then, we will have "gnuk.elf".

doc/index.rst

@@ -0,0 +1,24 @@
+.. Gnuk Documentation documentation master file, created by
+   sphinx-quickstart on Wed Jul  4 15:29:05 2012.
+   You can adapt this file completely to your liking, but it should at least
+   contain the root `toctree` directive.
+
+Gnuk Documentation
+==================
+
+Contents:
+
+.. toctree::
+   :maxdepth: 2
+
+   intro.rst
+   development.rst
+
+
+Indices and tables
+==================
+
+* :ref:`genindex`
+* :ref:`modindex`
+* :ref:`search`
+

doc/intro.rst

@@ -0,0 +1,45 @@
+Introduction
+============
+
+
+What's Gnuk?
+------------
+
+Gnuk is an implementation of USB cryptographic token for GNU Privacy
+Guard.  Gnuk supports OpenPGP card protocol version 2, and it runs on
+STM32F103 processor.
+
+
+Cryptographic token and feature of Gnuk
+---------------------------------------
+
+Cryptographic token is a store of private keys and it computes cryptographic functions on the device.
+
+
+Development Environment
+-----------------------
+
+See :doc:`development` for development environment for Gnuk.  It builds on Free Software.
+
+
+Prerequisites
+-------------
+
+* GNU Privacy Guard (GnuPG)
+
+* libusb
+
+* [Optional] PC/SC lite (pcscd, libccid)
+
+* SSH: openssh
+
+* Web: scute, firefox
+
+
+Usage
+-----
+
+* Sign with GnuPG
+* Decrypt with GnuPG
+* Use with OpenSSH
+* Use with Firefox for X.509 client certificate authentication

doc/note/HACKING

@@ -1,4 +1,4 @@
-* Random Number Generator
+* [DONE] Random Number Generator
 
 RNG is needed for Data Encryption Key to encrypt private key (P and Q).
 It is important to collect enough entropy.  Perhaps, it would

doc/note/NOTES

@@ -77,7 +77,8 @@ KEYPTR
                <---encrypted----><---  plain  ---->
 
 key_addr                       4-byte
-additional_data_encrypted      16-byte
+initial_vector (random)        16-byte
+checksum_encrypted             16-byte
 dek_encrypted_by_keystring_pw1 16-byte
 dek_encrypted_by_keystring_rc  16-byte
 dek_encrypted_by_keystring_pw3 16-byte
@@ -85,6 +86,4 @@ dek_encrypted_by_keystring_pw3 16-byte
 ... decrypted to
 
 [   P   ][   Q   ]
-check   4-byte
-random  4-byte
-magic[] 8-byte
+checksum 16-byte

src/openpgp-do.c

@@ -793,11 +793,6 @@ gpg_do_write_prvkey (enum kind_of_key kk, const uint8_t *key_data, int key_len,
   memcpy (pd->iv, iv, INITIAL_VECTOR_SIZE);
   memcpy (pd->checksum_encrypted, kdi.checksum, DATA_ENCRYPTION_KEY_SIZE);
 
-  if (kk == GPG_KEY_FOR_SIGNING)
-    ac_reset_pso_cds ();
-  else
-    ac_reset_other ();
-
   if (ks_pw1)
     {
       ks_pw1_len = ks_pw1[0];
@@ -805,12 +800,11 @@ gpg_do_write_prvkey (enum kind_of_key kk, const uint8_t *key_data, int key_len,
     }
   else
     {
-      uint8_t ks123_pw1[KEYSTRING_SIZE_PW1];
+      uint8_t ks[KEYSTRING_MD_SIZE];
 
-      ks123_pw1[0] = strlen (OPENPGP_CARD_INITIAL_PW1);
-      s2k (BY_USER, (uint8_t *)OPENPGP_CARD_INITIAL_PW1,
-	   strlen (OPENPGP_CARD_INITIAL_PW1), ks123_pw1+1);
-      encrypt_dek (ks123_pw1+1, pd->dek_encrypted_1);
+      s2k (BY_USER, (const uint8_t *)OPENPGP_CARD_INITIAL_PW1,
+	   strlen (OPENPGP_CARD_INITIAL_PW1), ks);
+      encrypt_dek (ks, pd->dek_encrypted_1);
     }
 
   if (ks_rc)
@@ -1572,26 +1566,27 @@ gpg_do_keygen (uint8_t kk_byte)
 
   if (kk == GPG_KEY_FOR_SIGNING)
     {
-      /* Authintication has been reset within gpg_do_write_prvkey. */
-      /* But GnuPG expects it's ready for signing. */
-      /* Thus, we call verify_pso_cds here. */
       const uint8_t *ks_pw1 = gpg_do_read_simple (NR_DO_KEYSTRING_PW1);
-      const uint8_t *pw;
-      int pw_len;
+      uint8_t keystring[KEYSTRING_MD_SIZE];
+      const uint8_t *ks;
+
+      /* GnuPG expects it's ready for signing. */
+      /* Don't call ac_reset_pso_cds here, but load the private key */
 
       if (ks_pw1)
-	{
-	  pw = ks_pw1+1;
-	  pw_len = ks_pw1[0];
-	}
+	ks = ks_pw1+1;
       else
 	{
-	  pw = (const uint8_t *)OPENPGP_CARD_INITIAL_PW1;
-	  pw_len = strlen (OPENPGP_CARD_INITIAL_PW3);
+	  const uint8_t * pw = (const uint8_t *)OPENPGP_CARD_INITIAL_PW1;
+
+	  s2k (BY_USER, pw, strlen (OPENPGP_CARD_INITIAL_PW1), keystring);
+	  ks = keystring;
 	}
 
-      verify_pso_cds (pw, pw_len);
+      gpg_do_load_prvkey (GPG_KEY_FOR_SIGNING, BY_USER, ks);
     }
+  else
+    ac_reset_other ();
 
   gpg_do_public_key (kk_byte);
 }

src/openpgp.c

@@ -776,11 +776,16 @@ cmd_pso (void)
 
       /* Skip padding 0x00 */
       len--;
+      if (len != KEY_CONTENT_LEN)
+	GPG_CONDITION_NOT_SATISFIED ();
+      else
+	{
 	  r = rsa_decrypt (apdu.cmd_apdu_data+1, res_APDU, len,
 			   &kd[GPG_KEY_FOR_DECRYPTION]);
 	  if (r < 0)
 	    GPG_ERROR ();
 	}
+    }
   else
     {
       DEBUG_INFO (" - ??");

src/usb_desc.c

@@ -258,11 +258,11 @@ static const uint8_t gnukStringLangID[] = {
 #include "usb-strings.c.inc"
 
 const uint8_t gnukStringSerial[] = {
-  18*2+2,			/* bLength */
+  17*2+2,			/* bLength */
   USB_STRING_DESCRIPTOR_TYPE,	/* bDescriptorType */
-  /* FSIJ-0.19 */
+  /* FSIJ-1.0 */
   'F', 0, 'S', 0, 'I', 0, 'J', 0, '-', 0,
-  '0', 0, '.', 0, '2', 0, '1', 0, /* Version number of Gnuk */
+  '1', 0, '.', 0, '0', 0, /* Version number of Gnuk */
   '-', 0,
   0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff,
   0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff,

test/features/002_get_data_static.feature

@@ -8,7 +8,7 @@ Feature: command GET DATA
 
   Scenario: data object extended capabilities
      When requesting extended capabilities: c0
-     Then you should get: \x30\x00\x00\x00\x00\x00\x00\xff\x01\x00
+     Then data should match: \x30\x00\x00\x00[\x00\x08]\x00\x00\xff\x01\x00
 
   Scenario: data object algorithm attributes 1
      When requesting algorithm attributes 1: c1

test/features/202_keygen.feature

@@ -21,6 +21,13 @@ Feature: key generation
      And put the second data to d0
      Then it should get success
 
+  Scenario: compute digital signature by OPENPGP.1 key (1)
+     Given a message "GnuPG assumes that PW1 keeps valid after keygen."
+     And a public key from token for OPENPGP.1
+     And let a token compute digital signature
+     And verify signature
+     Then it should get success
+
   Scenario: verify PW1 (1) after keygen
      Given cmd_verify with 1 and "another user pass phrase"
      Then it should get success

test/features/210_compute_signature.feature

@@ -33,4 +33,4 @@ Feature: compute digital signature
 
   Scenario: data object ds counter
      When requesting ds counter: 93
-     Then you should get: \x00\x00\x02
+     Then data should match: \x00\x00(\x02|\x03)

test/features/402_get_data_static.feature

@@ -8,7 +8,7 @@ Feature: command GET DATA
 
   Scenario: data object extended capabilities
      When requesting extended capabilities: c0
-     Then you should get: \x30\x00\x00\x00\x00\x00\x00\xff\x01\x00
+     Then data should match: \x30\x00\x00\x00[\x00\x08]\x00\x00\xff\x01\x00
 
   Scenario: data object algorithm attributes 1
      When requesting algorithm attributes 1: c1

test/features/602_keygen.feature

@@ -21,6 +21,13 @@ Feature: key generation
      And put the second data to d0
      Then it should get success
 
+  Scenario: compute digital signature by OPENPGP.1 key (1)
+     Given a message "GnuPG assumes that PW1 keeps valid after keygen."
+     And a public key from token for OPENPGP.1
+     And let a token compute digital signature
+     And verify signature
+     Then it should get success
+
   Scenario: verify PW1 (1) after keygen
      Given cmd_verify with 1 and "another user pass phrase"
      Then it should get success

test/features/610_compute_signature.feature

@@ -33,4 +33,4 @@ Feature: compute digital signature
 
   Scenario: data object ds counter
      When requesting ds counter: 93
-     Then you should get: \x00\x00\x02
+     Then data should match: \x00\x00(\x02|\x03)

test/features/770_key_removal.feature

@@ -0,0 +1,43 @@
+Feature: key removal
+  In order to use a token
+  A token should have keys
+
+  Scenario: remove OPENPGP.1 key (sign)
+     When removing a key OPENPGP.1
+     Then it should get success
+
+  Scenario: remove OPENPGP.2 key (decrypt)
+     When removing a key OPENPGP.2
+     Then it should get success
+
+  Scenario: remove OPENPGP.3 key (authentication)
+     When removing a key OPENPGP.3
+     Then it should get success
+
+  Scenario: verify PW3 (admin-less mode)
+     Given cmd_verify with 3 and "12345678"
+     Then it should get success
+
+  Scenario: remove data object Finger print sig
+     Given cmd_put_data with c7 and ""
+     Then it should get success
+
+  Scenario: remove data object Finger print dec
+     Given cmd_put_data with c8 and ""
+     Then it should get success
+
+  Scenario: remove data object Finger print aut
+     Given cmd_put_data with c9 and ""
+     Then it should get success
+
+  Scenario: remove data object keygeneration data/time sig
+     Given cmd_put_data with ce and ""
+     Then it should get success
+
+  Scenario: remove data object keygeneration data/time dec
+     Given cmd_put_data with cf and ""
+     Then it should get success
+
+  Scenario: remove data object keygeneration data/time aut
+     Given cmd_put_data with d0 and ""
+     Then it should get success

test/features/780_personalization_reset.feature

@@ -0,0 +1,27 @@
+Feature: removal of data objects
+  In order to use a token
+  A token should have personalized data
+
+  Scenario: remove data object Login
+     Given cmd_put_data with 5e and ""
+     Then it should get success
+
+  Scenario: remove data object Name
+     Given cmd_put_data with 5b and ""
+     Then it should get success
+
+  Scenario: remove data object Language preference
+     Given cmd_put_data with 5f2d and ""
+     Then it should get success
+
+  Scenario: remove data object Sex
+     Given cmd_put_data with 5f35 and ""
+     Then it should get success
+
+  Scenario: remove data object URL
+     Given cmd_put_data with 5f50 and ""
+     Then it should get success
+
+  Scenario: remove data object pw1 status bytes
+     Given cmd_put_data with c4 and "\x00"
+     Then it should get success

test/features/790_reset_passphrase.feature

@@ -0,0 +1,7 @@
+Feature: confirm factory setting pass phrase
+  In order to conform OpenPGP card 2.0 specification
+  A token should support pass phrase: PW1, PW3 and reset code
+
+  Scenario: verify PW3 (admin-less mode)
+     Given cmd_verify with 3 and "12345678"
+     Then it should get success

test/features/800_empty_check.feature

@@ -0,0 +1,79 @@
+Feature: confirm empty token
+  In order to start tests
+  A token should be empty (no data, no keys)
+
+  Scenario: data object Login
+     When requesting login data: 5e
+     Then you should get NULL
+
+  Scenario: data object Name
+     When requesting name: 5b
+     Then you should get NULL
+
+  Scenario: data object Language preference
+     When requesting anguage preference: 5f2d
+     Then you should get NULL
+
+  Scenario: data object Sex
+     When requesting sex: 5f35
+     Then you should get NULL
+
+  Scenario: data object URL
+     When requesting URL: 5f50
+     Then you should get NULL
+
+  Scenario: data object ds counter
+     When requesting ds counter: 93
+     Then you should get: \x00\x00\x00
+
+  Scenario: data object pw1 status bytes
+     When requesting pw1 status bytes: c4
+     Then you should get: \x00\x7f\x7f\x7f\x03\x03\x03
+
+  Scenario: data object finger print 0
+     When requesting finger print: c5
+     Then you should get: \x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00
+
+  Scenario: data object finger print 1
+     When requesting finger print: c7
+     Then you should get NULL
+
+  Scenario: data object finger print 2
+     When requesting finger print: c8
+     Then you should get NULL
+
+  Scenario: data object finger print 3
+     When requesting finger print: c9
+     Then you should get NULL
+
+  Scenario: data object CA finger print 0
+     When requesting finger print: c6
+     Then you should get: \x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00
+
+  Scenario: data object CA finger print 1
+     When requesting finger print: ca
+     Then you should get NULL
+
+  Scenario: data object CA finger print 2
+     When requesting finger print: cb
+     Then you should get NULL
+
+  Scenario: data object CA finger print 3
+     When requesting finger print: cc
+     Then you should get NULL
+
+  Scenario: data object date/time of key pair 0
+     When requesting date/time of key pair: cd
+     Then you should get: \x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00
+
+  Scenario: data object date/time of key pair 1
+     When requesting date/time of key pair: ce
+     Then you should get NULL
+
+  Scenario: data object date/time of key pair 2
+     When requesting date/time of key pair: cf
+     Then you should get NULL
+
+  Scenario: data object date/time of key pair 3
+     When requesting date/time of key pair: d0
+     Then you should get NULL

test/features/801_empty_check_passphrase.feature

@@ -0,0 +1,15 @@
+Feature: confirm empty token
+  In order to start tests
+  A token should be empty (no pass phrase)
+
+  Scenario: verify PW1 factory setting (1)
+     Given cmd_verify with 1 and "123456"
+     Then it should get success
+
+  Scenario: verify PW1 factory setting (2)
+     Given cmd_verify with 2 and "123456"
+     Then it should get success
+
+  Scenario: verify PW3 factory setting
+     Given cmd_verify with 3 and "12345678"
+     Then it should get success

test/features/802_get_data_static.feature

@@ -0,0 +1,27 @@
+Feature: command GET DATA
+  In order to conform OpenPGP card 2.0 specification
+  A token should support all mandatory features of the specification
+
+  Scenario: data object historical bytes
+     When requesting historical bytes: 5f52
+     Then you should get: \x00\x31\x84\x73\x80\x01\x80\x00\x90\x00
+
+  Scenario: data object extended capabilities
+     When requesting extended capabilities: c0
+     Then data should match: \x30\x00\x00\x00[\x00\x08]\x00\x00\xff\x01\x00
+
+  Scenario: data object algorithm attributes 1
+     When requesting algorithm attributes 1: c1
+     Then you should get: \x01\x08\x00\x00\x20\x00
+
+  Scenario: data object algorithm attributes 2
+     When requesting algorithm attributes 2: c2
+     Then you should get: \x01\x08\x00\x00\x20\x00
+
+  Scenario: data object algorithm attributes 3
+     When requesting algorighm attributes 3: c3
+     Then you should get: \x01\x08\x00\x00\x20\x00
+
+  Scenario: data object AID
+     When requesting AID: 4f
+     Then data should match: \xd2\x76\x00\x01\x24\x01\x02\x00......\x00\x00

test/features/810_setup_passphrase.feature

@@ -0,0 +1,15 @@
+Feature: check pass phrase
+  In order to conform OpenPGP card 2.0 specification
+  A token should support pass phrase: PW1, PW3 and reset code
+
+  Scenario: verify PW1 (1)
+     Given cmd_verify with 1 and "123456"
+     Then it should get success
+
+  Scenario: verify PW1 (2)
+     Given cmd_verify with 2 and "123456"
+     Then it should get success
+
+  Scenario: verify PW3
+     Given cmd_verify with 3 and "12345678"
+     Then it should get success

test/features/820_personalization_write.feature

@@ -0,0 +1,27 @@
+Feature: personalize token write
+  In order to use a token
+  A token should be personalized with name, sex, url, etc.
+
+  Scenario: data object Login
+     Given cmd_put_data with 5e and "gpg_user"
+     Then it should get success
+
+  Scenario: data object Name
+     Given cmd_put_data with 5b and "GnuPG User"
+     Then it should get success
+
+  Scenario: data object Language preference
+     Given cmd_put_data with 5f2d and "ja"
+     Then it should get success
+
+  Scenario: data object Sex
+     Given cmd_put_data with 5f35 and "1"
+     Then it should get success
+
+  Scenario: data object URL
+     Given cmd_put_data with 5f50 and "http://www.fsij.org/gnuk/"
+     Then it should get success
+
+  Scenario: data object pw1 status bytes
+     Given cmd_put_data with c4 and "\x01"
+     Then it should get success

test/features/821_personalization_read.feature

@@ -0,0 +1,27 @@
+Feature: personalize token read
+  In order to use a token
+  A token should be personalized with name, sex, url, etc.
+
+  Scenario: data object Login
+     When requesting login data: 5e
+     Then you should get: gpg_user
+
+  Scenario: data object Name
+     When requesting name: 5b
+     Then you should get: GnuPG User
+
+  Scenario: data object Language preference
+     When requesting anguage preference: 5f2d
+     Then you should get: ja
+
+  Scenario: data object Sex
+     When requesting sex: 5f35
+     Then you should get: 1
+
+  Scenario: data object URL
+     When requesting URL: 5f50
+     Then you should get: http://www.fsij.org/gnuk/
+
+  Scenario: data object pw1 status bytes
+     When requesting pw1 status bytes: c4
+     Then you should get: \x01\x7f\x7f\x7f\x03\x03\x03

test/features/830_key_registration.feature

@@ -0,0 +1,56 @@
+Feature: import keys to token 
+  In order to use a token
+  A token should have keys
+
+  Scenario: importing OPENPGP.1 key (sign)
+     Given a RSA key pair 0
+     And importing it to the token as OPENPGP.1
+     Then it should get success
+
+  Scenario: importing OPENPGP.2 key (decrypt)
+     Given a RSA key pair 1
+     And importing it to the token as OPENPGP.2
+     Then it should get success
+
+  Scenario: importing OPENPGP.3 key (authentication)
+     Given a RSA key pair 2
+     And importing it to the token as OPENPGP.3
+     Then it should get success
+
+  Scenario: setup data object Finger print sig
+     Given a fingerprint of OPENPGP.1 key
+     And put the data to c7
+     Then it should get success
+
+  Scenario: setup data object Finger print dec
+     Given a fingerprint of OPENPGP.2 key
+     And put the data to c8
+     Then it should get success
+
+  Scenario: setup data object Finger print aut
+     Given a fingerprint of OPENPGP.3 key
+     And put the data to c9
+     Then it should get success
+
+  Scenario: setup data object keygeneration data/time sig
+     Given a timestamp of OPENPGP.1 key
+     And put the data to ce
+     Then it should get success
+
+  Scenario: setup data object keygeneration data/time dec
+     Given a timestamp of OPENPGP.2 key
+     And put the data to cf
+     Then it should get success
+
+  Scenario: setup data object keygeneration data/time aut
+     Given a timestamp of OPENPGP.3 key
+     And put the data to d0
+     Then it should get success
+
+  Scenario: verify PW1 (1) again
+     Given cmd_verify with 1 and "123456"
+     Then it should get success
+
+  Scenario: verify PW1 (2) again
+     Given cmd_verify with 2 and "123456"
+     Then it should get success

test/features/850_compute_signature.feature

@@ -0,0 +1,31 @@
+Feature: compute digital signature
+  In order to use a token
+  A token should compute digital signature properly
+
+  Scenario: compute digital signature by OPENPGP.1 key (1)
+     Given a message "This is a test message."
+     And let a token compute digital signature
+     And compute digital signature on host with RSA key pair 0
+     Then results should be same
+
+  Scenario: compute digital signature by OPENPGP.1 key (2)
+     Given a message "This is another test message.\nMultiple lines.\n"
+     And let a token compute digital signature
+     And compute digital signature on host with RSA key pair 0
+     Then results should be same
+
+  Scenario: compute digital signature by OPENPGP.3 key (1)
+     Given a message "This is a test message."
+     And let a token authenticate
+     And compute digital signature on host with RSA key pair 2
+     Then results should be same
+
+  Scenario: compute digital signature by OPENPGP.3 key (2)
+     Given a message "This is another test message.\nMultiple lines.\n"
+     And let a token authenticate
+     And compute digital signature on host with RSA key pair 2
+     Then results should be same
+
+  Scenario: data object ds counter
+     When requesting ds counter: 93
+     Then you should get: \x00\x00\x02

test/features/851_decryption.feature

@@ -0,0 +1,16 @@
+Feature: decryption 
+  In order to use a token
+  A token should decrypt encrypted data
+
+  Scenario: decrypt by OPENPGP.2 key (1)
+     Given a plain text "This is a test message."
+     And encrypt it on host with RSA key pair 1
+     And let a token decrypt encrypted data
+     Then decrypted data should be same as a plain text
+
+  Scenario: decrypt by OPENPGP.2 key (2)
+     Given a plain text "RSA decryption is as easy as pie."
+     And encrypt it on host with RSA key pair 1
+     And let a token decrypt encrypted data
+     Then decrypted data should be same as a plain text
+

test/features/860_key_removal.feature

@@ -0,0 +1,48 @@
+@keygen
+Feature: key removal
+  In order to use a token
+  A token should have keys
+
+  Scenario: remove OPENPGP.1 key (sign)
+     When removing a key OPENPGP.1
+     Then it should get success
+
+  Scenario: remove OPENPGP.2 key (decrypt)
+     When removing a key OPENPGP.2
+     Then it should get success
+
+  Scenario: remove OPENPGP.3 key (authentication)
+     When removing a key OPENPGP.3
+     Then it should get success
+
+  Scenario: remove data object Finger print sig
+     Given cmd_put_data with c7 and ""
+     Then it should get success
+
+  Scenario: remove data object Finger print dec
+     Given cmd_put_data with c8 and ""
+     Then it should get success
+
+  Scenario: remove data object Finger print aut
+     Given cmd_put_data with c9 and ""
+     Then it should get success
+
+  Scenario: remove data object keygeneration data/time sig
+     Given cmd_put_data with ce and ""
+     Then it should get success
+
+  Scenario: remove data object keygeneration data/time dec
+     Given cmd_put_data with cf and ""
+     Then it should get success
+
+  Scenario: remove data object keygeneration data/time aut
+     Given cmd_put_data with d0 and ""
+     Then it should get success
+
+  Scenario: verify PW1
+     Given cmd_verify with 1 and "123456"
+     Then it should get success
+
+  Scenario: verify PW2
+     Given cmd_verify with 2 and "123456"
+     Then it should get success

test/features/862_keygen.feature

@@ -0,0 +1,37 @@
+@keygen
+Feature: key generation
+  In order to use a token
+  A token should have keys
+
+  Scenario: generate OPENPGP.1 key (sign)
+     When generating a key of OPENPGP.1
+     And put the first data to c7
+     And put the second data to ce
+     Then it should get success
+
+  Scenario: generate OPENPGP.2 key (decrypt)
+     When generating a key of OPENPGP.2
+     And put the first data to c8
+     And put the second data to cf
+     Then it should get success
+
+  Scenario: generate OPENPGP.3 key (authentication)
+     When generating a key of OPENPGP.3
+     And put the first data to c9
+     And put the second data to d0
+     Then it should get success
+
+  Scenario: compute digital signature by OPENPGP.1 key
+     Given a message "GnuPG assumes that PW1 keeps valid after keygen."
+     And a public key from token for OPENPGP.1
+     And let a token compute digital signature
+     And verify signature
+     Then it should get success
+
+  Scenario: verify PW1 (1) after keygen
+     Given cmd_verify with 1 and "123456"
+     Then it should get success
+
+  Scenario: verify PW1 (2) after keygen
+     Given cmd_verify with 2 and "123456"
+     Then it should get success

test/features/870_compute_signature.feature

@@ -0,0 +1,36 @@
+@keygen
+Feature: compute digital signature
+  In order to use a token
+  A token should compute digital signature properly
+
+  Scenario: compute digital signature by OPENPGP.1 key (1)
+     Given a message "This is a test message."
+     And a public key from token for OPENPGP.1
+     And let a token compute digital signature
+     And verify signature
+     Then it should get success
+
+  Scenario: compute digital signature by OPENPGP.1 key (2)
+     Given a message "This is another test message.\nMultiple lines.\n"
+     And a public key from token for OPENPGP.1
+     And let a token compute digital signature
+     And verify signature
+     Then it should get success
+
+  Scenario: compute digital signature by OPENPGP.3 key (1)
+     Given a message "This is a test message."
+     And a public key from token for OPENPGP.3
+     And let a token authenticate
+     And verify signature
+     Then it should get success
+
+  Scenario: compute digital signature by OPENPGP.3 key (2)
+     Given a message "This is another test message.\nMultiple lines.\n"
+     And a public key from token for OPENPGP.3
+     And let a token authenticate
+     And verify signature
+     Then it should get success
+
+  Scenario: data object ds counter
+     When requesting ds counter: 93
+     Then data should match: \x00\x00(\x02|\x03)

test/features/871_decryption.feature

@@ -0,0 +1,19 @@
+@keygen
+Feature: decryption 
+  In order to use a token
+  A token should decrypt encrypted data
+
+  Scenario: decrypt by OPENPGP.2 key (1)
+     Given a plain text "This is a test message."
+     And a public key from token for OPENPGP.2
+     And encrypt it on host
+     And let a token decrypt encrypted data
+     Then decrypted data should be same as a plain text
+
+  Scenario: decrypt by OPENPGP.2 key (2)
+     Given a plain text "RSA decryption is as easy as pie."
+     And a public key from token for OPENPGP.2
+     And encrypt it on host
+     And let a token decrypt encrypted data
+     Then decrypted data should be same as a plain text
+

test/rsa_keys.py

@@ -125,24 +125,24 @@ def compute_signature(keyno, digestinfo):
     sig = t2 + t * q
     return sig
 
-def integer_to_bytes(i):
+def integer_to_bytes_256(i):
     s = hex(i)[2:]
     s = s.rstrip('L')
     if len(s) & 1:
         s = '0' + s
-    return unhexlify(s)
+    return string.rjust(unhexlify(s), 256, '\x00')
 
 def encrypt(keyno, plaintext):
     e = key[keyno][4]
     n = key[keyno][7]
     m = pkcs1_pad_for_crypt(plaintext)
-    return '\x00' + integer_to_bytes(pow(m, e, n))
+    return '\x00' + integer_to_bytes_256(pow(m, e, n))
 
 def encrypt_with_pubkey(pubkey_info, plaintext):
     n = int(hexlify(pubkey_info[0]), 16)
     e = int(hexlify(pubkey_info[1]), 16)
     m = pkcs1_pad_for_crypt(plaintext)
-    return '\x00' + integer_to_bytes(pow(m, e, n))
+    return '\x00' + integer_to_bytes_256(pow(m, e, n))
 
 def verify_signature(pubkey_info, digestinfo, sig):
     n = int(hexlify(pubkey_info[0]), 16)

tool/stlinkv2.py

@@ -216,27 +216,31 @@ class stlinkv2(object):
         v = self.execute_get("\xf2\x22\x00", 4)
         return v[0] + (v[1]<<8) + (v[2]<<16) + (v[3]<<24)
 
-    # For FST-01-00 and FST-01: LED on, USB off
+    # For FST-01-00 and FST-01: LED on, USB connect
     def setup_gpio(self):
         apb2enr = self.read_memory_u32(0x40021018)
         apb2enr = apb2enr | 4 | 8 | 0x1000 # Enable port A, port B, and SPI1
         self.write_memory_u32(0x40021018, apb2enr)    # RCC->APB2ENR
         self.write_memory_u32(0x4002100c, 4|8|0x1000) # RCC->APB2RSTR
         self.write_memory_u32(0x4002100c, 0)
-        self.write_memory_u32(GPIOA+0x0c, 0xfffffbff) # ODR
+        self.write_memory_u32(GPIOA+0x0c, 0xffffffff) # ODR
         self.write_memory_u32(GPIOA+0x04, 0x88888383) # CRH
         self.write_memory_u32(GPIOA+0x00, 0xBBB38888) # CRL
         self.write_memory_u32(GPIOB+0x0c, 0xffffffff) # ODR
-        self.write_memory_u32(GPIOB+0x04, 0x88888883) # CRH
-        self.write_memory_u32(GPIOB+0x00, 0x88888888) # CRL
+        self.write_memory_u32(GPIOB+0x04, 0x88888888) # CRH
+        self.write_memory_u32(GPIOB+0x00, 0x88888883) # CRL
 
-    # For FST-01-00 and FST-01: LED off, USB off
+    # For FST-01-00 and FST-01: LED on, USB disconnect
+    def usb_disconnect(self):
+        self.write_memory_u32(GPIOA+0x0c, 0xfffffbff) # ODR
+
+    # For FST-01-00 and FST-01: LED off, USB connect
     def finish_gpio(self):
+        self.write_memory_u32(GPIOA+0x0c, 0xfffffeff) # ODR
+        self.write_memory_u32(GPIOB+0x0c, 0xfffffffe) # ODR
         apb2enr = self.read_memory_u32(0x40021018)
         apb2enr = apb2enr &  ~(4 | 8 | 0x1000)
         self.write_memory_u32(0x40021018, apb2enr)    # RCC->APB2ENR
-        self.write_memory_u32(GPIOA+0x0c, 0xfffffaff) # ODR
-        self.write_memory_u32(GPIOB+0x0c, 0xfffffffe) # ODR
 
     def spi_flash_init(self):
         self.write_memory_u32(SPI1+0x00, 0x0004); # CR1 <= MSTR
@@ -562,6 +566,9 @@ def main(show_help, erase_only, no_protect, spi_flash_check,
     if unlock:
         stl.reset_sys()
         stl.option_bytes_write(OPTION_BYTES_ADDR,RDP_KEY)
+        stl.usb_disconnect()
+        time.sleep(0.100)
+        stl.finish_gpio()
         print "Flash ROM read protection disabled.  Reset the board, now."
         return 0
 
@@ -578,6 +585,8 @@ def main(show_help, erase_only, no_protect, spi_flash_check,
         stl.flash_erase_all()
 
     if erase_only:
+        stl.usb_disconnect()
+        time.sleep(0.100)
         stl.finish_gpio()
         return 0
 
@@ -606,6 +615,7 @@ def main(show_help, erase_only, no_protect, spi_flash_check,
         print "Flash ROM read protection enabled.  Reset the board to enable protection."
 
     if reset_after_successful_write:
+        stl.usb_disconnect()
         stl.reset_sys()
         stl.run()
         stl.exit_debug()