version 0.20

ChangeLog

@@ -1,3 +1,9 @@
+2012-06-19  Niibe Yutaka  <gniibe@fsij.org>
+
+	* Version 0.20.
+
+	* src/usb_desc.c (gnukStringSerial): Updated.
+
 2012-06-18  Niibe Yutaka  <gniibe@fsij.org>
 
 	LED display output change.
@@ -6,7 +12,7 @@
 	(main_mode, display_interaction): Remove.
 	(led_inverted, emit_led): New.
 	(display_status_code): Use emit_led.
-	(led_blink): Use LED_* for spec.
+	(led_blink): Use LED_* for SPEC.
 	(main, fatal): New LED display output.
 	* src/gnuk.h (LED_ONESHOT, LED_TWOSHOTS, LED_SHOW_STATUS)
 	(LED_START_COMMAND, LED_FINISH_COMMAND, LED_FATAL): New semantics.

NEWS

@@ -1,19 +1,12 @@
 Gnuk NEWS - User visible changes
 
-* Major changes in Gnuk XXXX
+* Major changes in Gnuk 0.20
 
-  Released 2012-XX-XX, by NIIBE Yutaka
-
-** LED display output change
-LED display output by Gnuk is now more reactive.  It shows status code
-when it gets GET_STATUS message of CCID.  When you communicate Gnuk by
-internal CCID driver of GnuPG (instead of PC/SC), and enable
-'debug-disable-ticker' option in .gnupg/scdaemon.conf, it is more
-silent now.
+  Released 2012-06-19, by NIIBE Yutaka
 
 ** Key generation feature added
 Finally, key generation is supported.  Note that it may be very slow.
-It will take a few minutes (or more) to generate two or three keys,
+It may take a few minutes (or more) to generate two or three keys,
 when you are unlucky.
 
 ** DnD pinentry support is deprecated
@@ -36,6 +29,13 @@ single block CFB mode).  (3) Key data plus checksum are encrypted in
 CFB mode with initial vector (it will be able to switch OCB mode
 easily).
 
+** LED display output change
+LED display output by Gnuk is now more reactive.  It shows status code
+when it gets GET_STATUS message of CCID.  When you communicate Gnuk by
+internal CCID driver of GnuPG (instead of PC/SC), and enable
+'debug-disable-ticker' option in .gnupg/scdaemon.conf, it is more
+silent now.
+
 
 * Major changes in Gnuk 0.19
 

README

@@ -1,15 +1,15 @@
-Gnuk - software for GnuPG USB Token
+Gnuk - An Implementation of USB Cryptographic Token for GnuPG
 
-							   Version 0.19
-							     2012-06-06
+							   Version 0.20
+							     2012-06-19
 							   Niibe Yutaka
 				      Free Software Initiative of Japan
 
 What's Gnuk?
 ============
 
-Gnuk is software implementation of a USB token for GNU Privacy Guard.
-Gnuk supports OpenPGP card protocol version 2, and it runs on
+Gnuk is an implementation of USB cryptographic token for GNU Privacy
+Guard.  Gnuk supports OpenPGP card protocol version 2, and it runs on
 STM32F103 processor.
 
 I wish that Gnuk will be a developer's soother who uses GnuPG.  I have
@@ -19,8 +19,8 @@ to bring a card reader all the time.  With Gnuk, this issue will be
 solved by a USB token which is small enough.
 
 Please look at the graphics of "gnuk.svg" for the software name.  My
-son used to be with his NUK(R), always, everywhere.  I am with a USB
-Token by "Gnuk", always, everywhere.
+son used to be with his NUK(R), always, everywhere.  Now, I am with a
+USB Cryptographic Token by "Gnuk", always, everywhere.
 
 
 FAQ
@@ -113,9 +113,10 @@ Ac: STLink v2 is cheap one.  See http://code.google.com/p/arm-utilities/
 Release notes
 =============
 
-This is twentieth release of Gnuk.  In this release, firmware upgrade
-feature is added.  While it is daily use, some features (including
-firmware upgrade) are still considered experimental.
+This is "version 1.0 release candidate" of Gnuk.  In this release, key
+generation feature is added.  While it is daily use, some features
+(including key generation and firmware upgrade) are still considered
+experimental.
 
 Tested features are:
 
@@ -137,12 +138,22 @@ Tested features are:
 	  but you can remove all keys to import again).
 	* Key generation on device side
 
+Original feature of Gnuk, tested (lightly):
+
+	* Upgrading with "EXTERNAL AUTHENTICATE" by reGNUal
+
 It is known not-working well:
 
 	* For some version of kernel and libccid, --enable-debug can't
 	  work well.  Please make sure to disable DEBUG option if it
 	  doesn't work well.
 
+It is known that the combination libccid 1.4.1 (or newer) with libusb
+1.0.8 (or older) has a problem.  It is possible for USB communication
+to be failed, because of a bug in libusb implementation.  Use libusbx
+1.0.9 or newer, or don't use PC/SC, but use internal CCID driver of
+GnuPG.
+
 
 Targets
 =======
@@ -171,13 +182,6 @@ Another PIN-pad support is connecting rotary encoder, push switch and
 7-segment LED display.  Both of PIN verification and PIN modification
 are supported for this circuit extension.
 
-Also, there is "DnDpinentry" support.  This is using usual file
-manager for pinentry.  User does "drag and drop" folders and it will
-be pin entry.  This feature doesn't require any additional hardware.
-See doc/settings-for-DnDpinentry for your desktop configuration.
-However, this will be removed in future version, as it found it's
-not that useful.
-
 Note that you need pinpad support for GnuPG to use PIN-pad enabled
 Gnuk.  The pinpad support for GnuPG is currently in the master branch
 of GnuPG git repository at git.gnupg.org, and it's under evaluation.

src/usb_desc.c

@@ -262,7 +262,7 @@ const uint8_t gnukStringSerial[] = {
   USB_STRING_DESCRIPTOR_TYPE,	/* bDescriptorType */
   /* FSIJ-0.19 */
   'F', 0, 'S', 0, 'I', 0, 'J', 0, '-', 0,
-  '0', 0, '.', 0, '1', 0, '9', 0, /* Version number of Gnuk */
+  '0', 0, '.', 0, '2', 0, '0', 0, /* Version number of Gnuk */
   '-', 0,
   0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff,
   0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff,

tool/dfuse.py

@@ -94,7 +94,7 @@ STATE_DFU_ERROR               = 0x0a
 def get_four_bytes (v):
     return [ v % 256, (v >> 8)%256, (v >> 16)%256, (v >> 24) ]
 
-class DFU_STM32:
+class DFU_STM32(object):
     def __init__(self, device, configuration, interface):
         """
         __init__(device, configuration, interface) -> None

tool/gnuk_put_binary.py

@@ -2,7 +2,7 @@
 
 """
 gnuk_put_binary.py - a tool to put binary to Gnuk Token
-This tool is for importing certificate, updating random number, etc.
+This tool is for importing certificate, writing serial number, etc.
 
 Copyright (C) 2011, 2012 Free Software Initiative of Japan
 Author: NIIBE Yutaka <gniibe@fsij.org>

tool/gnuk_put_binary_libusb.py

@@ -2,7 +2,7 @@
 
 """
 gnuk_put_binary.py - a tool to put binary to Gnuk Token
-This tool is for importing certificate, updating random number, etc.
+This tool is for importing certificate, writing serial number, etc.
 
 Copyright (C) 2011, 2012 Free Software Initiative of Japan
 Author: NIIBE Yutaka <gniibe@fsij.org>
@@ -23,7 +23,6 @@ You should have received a copy of the GNU General Public License
 along with this program.  If not, see <http://www.gnu.org/licenses/>.
 """
 
-from intel_hex import *
 from struct import *
 import sys, time, os, binascii, string
 
@@ -49,7 +48,7 @@ def iso7816_compose(ins, p1, p2, data, cls=0x00):
         return pack('>BBBBB', cls, ins, p1, p2, data_len) + data
 
 # This class only supports Gnuk (for now) 
-class gnuk_token:
+class gnuk_token(object):
     def __init__(self, device, configuration, interface):
         """
         __init__(device, configuration, interface) -> None

tool/gnuk_upgrade.py

@@ -22,7 +22,6 @@ You should have received a copy of the GNU General Public License
 along with this program.  If not, see <http://www.gnu.org/licenses/>.
 """
 
-from intel_hex import *
 from struct import *
 import sys, time, os, binascii, string
 
@@ -47,7 +46,7 @@ def iso7816_compose(ins, p1, p2, data, cls=0x00):
     else:
         return pack('>BBBBB', cls, ins, p1, p2, data_len) + data
 
-class regnual:
+class regnual(object):
     def __init__(self, dev):
         conf = dev.configurations[0]
         intf_alt = conf.interfaces[0]
@@ -154,7 +153,7 @@ class regnual:
             pass
 
 # This class only supports Gnuk (for now) 
-class gnuk_token:
+class gnuk_token(object):
     def __init__(self, device, configuration, interface):
         """
         __init__(device, configuration, interface) -> None

tool/intel_hex.py

@@ -9,7 +9,7 @@ You can use/distribute/modify/etc. this for any purpose.
 
 import binascii
 
-class intel_hex:
+class intel_hex(object):
     def __init__(self, filename):
         self.start_address = 0
         self.address = 0