deon/gnuk
1
0
Fork 0
Code Issues Pull Requests Projects Releases Wiki Activity

add FST_01

Browse Source
This commit is contained in:
NIIBE Yutaka
2011-11-14 14:22:37 +09:00
parent e790bb783c
commit 1ac7e20fb0
5 changed files with 273 additions and 10 deletions
Download Patch File Download Diff File Expand all files Collapse all files

4
ChangeLog
View File

@@ -1,3 +1,7 @@
2011-11-14 Niibe Yutaka <gniibe@fsij.org>
* boards/FST_01/{mcuconf.h,board.h,board.c}: New.
2011-11-01 Niibe Yutaka <gniibe@fsij.org> 2011-11-01 Niibe Yutaka <gniibe@fsij.org>
* src/pin-dial.c (pinpad_getline): New. * src/pin-dial.c (pinpad_getline): New.

107
boards/FST_01/board.c Normal file
View File

@@ -0,0 +1,107 @@
#include "config.h"
#include "ch.h"
#include "hal.h"
#include "../common/hwinit.c"
void
hwinit0 (void)
{
hwinit0_common ();
}
void
hwinit1 (void)
{
hwinit1_common ();
#if defined(PINPAD_SUPPORT)
/* PA0/TIM2_CH1 = 1 (pull up) */
/* PA1/TIM2_CH2 = 0 (pull down) */
/* PA2/TIM2_CH3 <= Vout of CIR receiver module */
/* EXTI2 <= PA2 */
AFIO->EXTICR[0] = AFIO_EXTICR1_EXTI2_PA;
EXTI->IMR = 0;
EXTI->FTSR = EXTI_FTSR_TR2;
NVICEnableVector(EXTI2_IRQn,
CORTEX_PRIORITY_MASK(CORTEX_MINIMUM_PRIORITY));
/* TIM2 */
RCC->APB1ENR |= RCC_APB1ENR_TIM2EN;
RCC->APB1RSTR = RCC_APB1RSTR_TIM2RST;
RCC->APB1RSTR = 0;
NVICEnableVector(TIM2_IRQn,
CORTEX_PRIORITY_MASK(CORTEX_MINIMUM_PRIORITY));
TIM2->CR1 = TIM_CR1_URS | TIM_CR1_ARPE;
TIM2->CR2 = TIM_CR2_TI1S;
TIM2->SMCR = TIM_SMCR_TS_0 | TIM_SMCR_TS_2 | TIM_SMCR_SMS_2;
TIM2->DIER = 0; /* Disable interrupt for now */
TIM2->CCMR1 = TIM_CCMR1_CC1S_0 | TIM_CCMR1_IC1F_0 | TIM_CCMR1_IC1F_3
| TIM_CCMR1_CC2S_1 | TIM_CCMR1_IC2F_0 | TIM_CCMR1_IC2F_3;
TIM2->CCMR2 = 0;
TIM2->CCER = TIM_CCER_CC1E | TIM_CCER_CC2E | TIM_CCER_CC2P;
TIM2->PSC = 72 - 1; /* 1 MHz */
TIM2->ARR = 18000; /* 18 ms */
/* Generate UEV to upload PSC and ARR */
TIM2->EGR = TIM_EGR_UG;
#endif
}
void
USB_Cable_Config (int NewState)
{
if (NewState != DISABLE)
palSetPad (IOPORT1, GPIOA_USB_ENABLE);
else
palClearPad (IOPORT1, GPIOA_USB_ENABLE);
}
void
set_led (int value)
{
if (value)
palSetPad (IOPORT2, GPIOB_LED);
else
palClearPad (IOPORT2, GPIOB_LED);
}
#if defined(PINPAD_SUPPORT)
void
cir_ext_disable (void)
{
EXTI->PR = EXTI_PR_PR2;
EXTI->IMR &= ~EXTI_IMR_MR2;
}
void
cir_ext_enable (void)
{
EXTI->IMR |= EXTI_IMR_MR2;
}
extern void cir_ext_interrupt (void);
extern void cir_timer_interrupt (void);
CH_IRQ_HANDLER (EXTI2_IRQHandler)
{
CH_IRQ_PROLOGUE ();
chSysLockFromIsr ();
cir_ext_interrupt ();
chSysUnlockFromIsr ();
CH_IRQ_EPILOGUE ();
}
CH_IRQ_HANDLER (TIM2_IRQHandler)
{
CH_IRQ_PROLOGUE();
chSysLockFromIsr();
cir_timer_interrupt ();
chSysUnlockFromIsr();
CH_IRQ_EPILOGUE();
}
#endif

138
boards/FST_01/board.h Normal file
View File

@@ -0,0 +1,138 @@
/*
ChibiOS/RT - Copyright (C) 2006,2007,2008,2009,2010 Giovanni Di Sirio.
This file is part of ChibiOS/RT.
ChibiOS/RT is free software; you can redistribute it and/or modify
it under the terms of the GNU General Public License as published by
the Free Software Foundation; either version 3 of the License, or
(at your option) any later version.
ChibiOS/RT is distributed in the hope that it will be useful,
but WITHOUT ANY WARRANTY; without even the implied warranty of
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
GNU General Public License for more details.
You should have received a copy of the GNU General Public License
along with this program. If not, see <http://www.gnu.org/licenses/>.
---
A special exception to the GPL can be applied should you wish to distribute
a combined work that includes ChibiOS/RT, without being obliged to provide
the source code for any proprietary components. See the file exception.txt
for full details of how and when the exception can be applied.
*/
#ifndef _BOARD_H_
#define _BOARD_H_
/*
* Setup for the FST-01 board.
*/
/*
* Board identifier.
*/
#define BOARD_FST_01
#define BOARD_NAME "FST-01"
/*
* Board frequencies.
*/
#define STM32_LSECLK 32768
#define STM32_HSECLK 12000000
/*
* MCU type, this macro is used by both the ST library and the ChibiOS/RT
* native STM32 HAL.
*/
#define STM32F10X_MD
#define CPU_WITH_NO_GPIOE 1
/*
* IO pins assignments.
*/
#define GPIOB_LED 0
#define GPIOA_USB_ENABLE 10
#define GPIOA_SPI1NSS 4
/*
* Timer assignment for CIR
*/
#define TIMx TIM2
/*
* I/O ports initial setup, this configuration is established soon after reset
* in the initialization code.
*
* The digits have the following meaning:
* 0 - Analog input.
* 1 - Push Pull output 10MHz.
* 2 - Push Pull output 2MHz.
* 3 - Push Pull output 50MHz.
* 4 - Digital input.
* 5 - Open Drain output 10MHz.
* 6 - Open Drain output 2MHz.
* 7 - Open Drain output 50MHz.
* 8 - Digital input with PullUp or PullDown resistor depending on ODR.
* 9 - Alternate Push Pull output 10MHz.
* A - Alternate Push Pull output 2MHz.
* B - Alternate Push Pull output 50MHz.
* C - Reserved.
* D - Alternate Open Drain output 10MHz.
* E - Alternate Open Drain output 2MHz.
* F - Alternate Open Drain output 50MHz.
* Please refer to the STM32 Reference Manual for details.
*/
/*
* Port A setup.
* PA0 - input with pull-up (TIM2_CH1)
* PA1 - input with pull-down (TIM2_CH2)
* PA2 - input with pull-up (TIM2_CH3)
* PA11 - input with pull-up (USBDM)
* PA12 - input with pull-up (USBDP)
* Everything input with pull-up except:
* PA10 - Push pull output (USB 1:ON 0:OFF)
*/
#define VAL_GPIOACRL 0x88888888 /* PA7...PA0 */
#define VAL_GPIOACRH 0x88888388 /* PA15...PA8 */
#define VAL_GPIOAODR 0xFFFFFFFD
/*
* Port B setup.
* Everything input with pull-up except:
* PB0 - Push pull output (LED 1:ON 0:OFF)
*/
#define VAL_GPIOBCRL 0x88888883 /* PB7...PB0 */
#define VAL_GPIOBCRH 0x88888888 /* PB15...PB8 */
#define VAL_GPIOBODR 0xFFFFFFFF
/*
* Port C setup.
* Everything input with pull-up except:
*/
#define VAL_GPIOCCRL 0x88888888 /* PC7...PC0 */
#define VAL_GPIOCCRH 0x88888888 /* PC15...PC8 */
#define VAL_GPIOCODR 0xFFFFFFFF
/*
* Port D setup.
* Everything input with pull-up except:
* PD0 - Normal input (XTAL).
* PD1 - Normal input (XTAL).
*/
#define VAL_GPIODCRL 0x88888844 /* PD7...PD0 */
#define VAL_GPIODCRH 0x88888888 /* PD15...PD8 */
#define VAL_GPIODODR 0xFFFFFFFF
/*
* Port E setup.
* Everything input with pull-up except:
*/
#define VAL_GPIOECRL 0x88888888 /* PE7...PE0 */
#define VAL_GPIOECRH 0x88888888 /* PE15...PE8 */
#define VAL_GPIOEODR 0xFFFFFFFF
#endif /* _BOARD_H_ */

15
boards/FST_01/mcuconf.h Normal file
View File

@@ -0,0 +1,15 @@
/*
* HAL driver system settings.
*/
#define STM32_SW STM32_SW_PLL
#define STM32_PLLSRC STM32_PLLSRC_HSE
#define STM32_PLLXTPRE STM32_PLLXTPRE_DIV1
#define STM32_PLLMUL_VALUE 6
#define STM32_HPRE STM32_HPRE_DIV1
#define STM32_PPRE1 STM32_PPRE1_DIV2
#define STM32_PPRE2 STM32_PPRE2_DIV2
#define STM32_ADCPRE STM32_ADCPRE_DIV4
#define STM32_USBPRE STM32_USBPRE_DIV1P5
#define STM32_MCO STM32_MCO_NOCLOCK
#include "mcuconf-common.h"

19
src/gnuk.h
View File

@@ -333,6 +333,15 @@ extern void flash_do_write_internal (const uint8_t *p, int nr, const uint8_t *da
extern const unsigned char *unique_device_id (void); extern const unsigned char *unique_device_id (void);
extern const uint8_t gnukStringSerial[]; extern const uint8_t gnukStringSerial[];
#define LED_ONESHOT_SHORT ((eventmask_t)1)
#define LED_ONESHOT_LONG ((eventmask_t)2)
#define LED_TWOSHOT ((eventmask_t)4)
#define LED_STATUS_MODE ((eventmask_t)8)
#define LED_INPUT_MODE ((eventmask_t)16)
#define LED_FATAL_MODE ((eventmask_t)32)
extern Thread *main_thread;
extern void led_blink (int spec);
#if defined(PINPAD_SUPPORT) #if defined(PINPAD_SUPPORT)
#if defined(PINPAD_CIR_SUPPORT) #if defined(PINPAD_CIR_SUPPORT)
extern void cir_ext_disable (void); extern void cir_ext_disable (void);
@@ -350,14 +359,4 @@ extern uint8_t pin_input_len;
extern int pinpad_getline (int msg_code, systime_t timeout); extern int pinpad_getline (int msg_code, systime_t timeout);
#define LED_ONESHOT_SHORT ((eventmask_t)1)
#define LED_ONESHOT_LONG ((eventmask_t)2)
#define LED_TWOSHOT ((eventmask_t)4)
#define LED_STATUS_MODE ((eventmask_t)8)
#define LED_INPUT_MODE ((eventmask_t)16)
#define LED_FATAL_MODE ((eventmask_t)32)
extern Thread *main_thread;
extern void led_blink (int spec);
#endif #endif