561 lines
13 KiB
C
561 lines
13 KiB
C
/*
|
||
* usart-stm32.c - USART driver for STM32F103 (USART2 and USART3)
|
||
*
|
||
* Copyright (C) 2017, 2019 g10 Code GmbH
|
||
* Author: NIIBE Yutaka <gniibe@fsij.org>
|
||
*
|
||
* This file is a part of Chopstx, a thread library for embedded.
|
||
*
|
||
* Chopstx is free software: you can redistribute it and/or modify it
|
||
* under the terms of the GNU General Public License as published by
|
||
* the Free Software Foundation, either version 3 of the License, or
|
||
* (at your option) any later version.
|
||
*
|
||
* Chopstx is distributed in the hope that it will be useful, but
|
||
* WITHOUT ANY WARRANTY; without even the implied warranty of
|
||
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
|
||
* General Public License for more details.
|
||
*
|
||
* You should have received a copy of the GNU General Public License
|
||
* along with this program. If not, see <http://www.gnu.org/licenses/>.
|
||
*
|
||
* As additional permission under GNU GPL version 3 section 7, you may
|
||
* distribute non-source form of the Program without the copy of the
|
||
* GNU GPL normally required by section 4, provided you inform the
|
||
* recipients of GNU GPL by a written offer.
|
||
*
|
||
*/
|
||
|
||
#include <stdint.h>
|
||
#include <stdlib.h>
|
||
#include <chopstx.h>
|
||
#include <mcu/stm32.h>
|
||
#include <contrib/usart.h>
|
||
|
||
/* Hardware registers */
|
||
struct USART {
|
||
volatile uint32_t SR;
|
||
volatile uint32_t DR;
|
||
volatile uint32_t BRR;
|
||
volatile uint32_t CR1;
|
||
volatile uint32_t CR2;
|
||
volatile uint32_t CR3;
|
||
volatile uint32_t GTPR;
|
||
};
|
||
|
||
#define USART2_BASE (APB1PERIPH_BASE + 0x4400)
|
||
#define USART3_BASE (APB1PERIPH_BASE + 0x4800)
|
||
#define USART2 ((struct USART *)USART2_BASE)
|
||
#define USART3 ((struct USART *)USART3_BASE)
|
||
|
||
#define USART_SR_CTS (1 << 9)
|
||
#define USART_SR_LBD (1 << 8)
|
||
#define USART_SR_TXE (1 << 7)
|
||
#define USART_SR_TC (1 << 6)
|
||
#define USART_SR_RXNE (1 << 5)
|
||
#define USART_SR_IDLE (1 << 4)
|
||
#define USART_SR_ORE (1 << 3)
|
||
#define USART_SR_NE (1 << 2)
|
||
#define USART_SR_FE (1 << 1)
|
||
#define USART_SR_PE (1 << 0)
|
||
|
||
|
||
#define USART_CR1_UE (1 << 13)
|
||
#define USART_CR1_M (1 << 12)
|
||
#define USART_CR1_WAKE (1 << 11)
|
||
#define USART_CR1_PCE (1 << 10)
|
||
#define USART_CR1_PS (1 << 9)
|
||
#define USART_CR1_PEIE (1 << 8)
|
||
#define USART_CR1_TXEIE (1 << 7)
|
||
#define USART_CR1_TCIE (1 << 6)
|
||
#define USART_CR1_RXNEIE (1 << 5)
|
||
#define USART_CR1_IDLEIE (1 << 4)
|
||
#define USART_CR1_TE (1 << 3)
|
||
#define USART_CR1_RE (1 << 2)
|
||
#define USART_CR1_RWU (1 << 1)
|
||
#define USART_CR1_SBK (1 << 0)
|
||
|
||
#define USART_CR3_CTSE (1 << 9)
|
||
#define USART_CR3_RTSE (1 << 8)
|
||
#define USART_CR3_SCEN (1 << 5)
|
||
#define USART_CR3_NACK (1 << 4)
|
||
|
||
|
||
static struct usart_stat usart2_stat;
|
||
static struct usart_stat usart3_stat;
|
||
|
||
static struct chx_intr usart2_intr;
|
||
static struct chx_intr usart3_intr;
|
||
|
||
#define BUF_A2H_SIZE 256
|
||
#define BUF_H2A_SIZE 512
|
||
static uint8_t buf_usart2_rb_a2h[BUF_A2H_SIZE];
|
||
static uint8_t buf_usart2_rb_h2a[BUF_H2A_SIZE];
|
||
static uint8_t buf_usart3_rb_a2h[BUF_A2H_SIZE];
|
||
static uint8_t buf_usart3_rb_h2a[BUF_H2A_SIZE];
|
||
|
||
static struct rb usart2_rb_a2h;
|
||
static struct rb usart2_rb_h2a;
|
||
static struct rb usart3_rb_a2h;
|
||
static struct rb usart3_rb_h2a;
|
||
|
||
static chopstx_poll_cond_t usart2_app_write_event;
|
||
static chopstx_poll_cond_t usart3_app_write_event;
|
||
|
||
/* Global variables so that it can be easier to debug. */
|
||
static int usart2_tx_ready;
|
||
static int usart3_tx_ready;
|
||
|
||
#define INTR_REQ_USART2 38
|
||
#define INTR_REQ_USART3 39
|
||
|
||
#define USART_DEVNO_START 2
|
||
#define USART_DEVNO_END 3
|
||
|
||
struct usart {
|
||
struct USART *USART;
|
||
struct chx_intr *intr;
|
||
uint8_t irq_num;
|
||
struct usart_stat *stat;
|
||
struct rb *rb_a2h;
|
||
struct rb *rb_h2a;
|
||
uint8_t *buf_a2h;
|
||
uint8_t *buf_h2a;
|
||
chopstx_poll_cond_t *app_write_event;
|
||
int *tx_ready;
|
||
};
|
||
|
||
|
||
static const struct usart usart_array[] =
|
||
{
|
||
{ USART2, &usart2_intr, INTR_REQ_USART3,
|
||
&usart2_stat, &usart2_rb_a2h, &usart2_rb_h2a, buf_usart2_rb_a2h,
|
||
buf_usart2_rb_h2a, &usart2_app_write_event, &usart2_tx_ready },
|
||
{ USART3, &usart3_intr, INTR_REQ_USART3,
|
||
&usart3_stat, &usart3_rb_a2h, &usart3_rb_h2a, buf_usart3_rb_a2h,
|
||
buf_usart3_rb_h2a, &usart3_app_write_event, &usart3_tx_ready },
|
||
};
|
||
#define NUM_USART ((int)(sizeof (usart_array) / sizeof (struct usart)))
|
||
|
||
static int handle_intr (struct USART *USARTx, struct rb *rb2a, struct usart_stat *stat);
|
||
static int handle_tx (struct USART *USARTx, struct rb *rb2h, struct usart_stat *stat);
|
||
static void usart_config_recv_enable (struct USART *USARTx, int on);
|
||
|
||
struct brr_setting {
|
||
uint8_t baud_spec;
|
||
uint32_t brr_value;
|
||
};
|
||
#define NUM_BAUD (int)(sizeof (brr_table) / sizeof (struct brr_setting))
|
||
|
||
/* We assume 36MHz f_PCLK */
|
||
static const struct brr_setting brr_table[] = {
|
||
{ B600, (3750 << 4)},
|
||
{ B1200, (1875 << 4)},
|
||
{ B2400, ( 937 << 4)|8},
|
||
{ B9600, ( 234 << 4)|6},
|
||
{ B19200, ( 117 << 4)|3},
|
||
{ B57600, ( 39 << 4)|1},
|
||
{ B115200, ( 19 << 4)|8},
|
||
{ B230400, ( 9 << 4)|12},
|
||
{ B460800, ( 4 << 4)|14},
|
||
{ B921600, ( 2 << 4)|7},
|
||
{ BSCARD1, ( 232 << 4)|8}, /* 9677 */
|
||
{ BSCARD2, ( 116 << 4)|4}, /* 19354 */
|
||
{ BSCARD4, ( 58 << 4)|2}, /* 38709 */
|
||
{ BSCARD8, ( 29 << 4)|1}, /* 77419 */
|
||
{ BSCARD12, ( 19 << 4)|6}, /* 116129 */
|
||
{ BSCARD16, ( 14 << 4)|9}, /* 154506 */
|
||
{ BSCARD20, ( 11 << 4)|10}, /* 193548 */
|
||
};
|
||
|
||
#include "usart-common.c"
|
||
|
||
static void
|
||
usart_config_recv_enable (struct USART *USARTx, int on)
|
||
{
|
||
if (on)
|
||
USARTx->CR1 |= USART_CR1_RE;
|
||
else
|
||
USARTx->CR1 &= ~USART_CR1_RE;
|
||
}
|
||
|
||
|
||
int
|
||
usart_config (uint8_t dev_no, uint32_t config_bits)
|
||
{
|
||
struct USART *USARTx = get_usart_dev (dev_no);
|
||
uint8_t baud_spec = (config_bits & MASK_BAUD);
|
||
int i;
|
||
uint32_t cr1_config = (USART_CR1_UE | USART_CR1_RXNEIE | USART_CR1_TE);
|
||
/* TXEIE/TCIE will be enabled when
|
||
putting char */
|
||
/* No CTSIE, PEIE, IDLEIE, LBDIE */
|
||
if (USARTx == NULL)
|
||
return -1;
|
||
|
||
/* Disable USART before configure. */
|
||
USARTx->CR1 &= ~USART_CR1_UE;
|
||
|
||
if (((config_bits & MASK_CS) == CS7 && (config_bits & PARENB))
|
||
|| ((config_bits & MASK_CS) == CS8 && (config_bits & PARENB) == 0))
|
||
cr1_config &= ~USART_CR1_M;
|
||
else if ((config_bits & MASK_CS) == CS8)
|
||
cr1_config |= USART_CR1_M;
|
||
else
|
||
return -1;
|
||
|
||
if ((config_bits & PARENB) == 0)
|
||
cr1_config &= ~(USART_CR1_PCE | USART_CR1_PEIE);
|
||
else
|
||
cr1_config |= (USART_CR1_PCE | USART_CR1_PEIE);
|
||
|
||
if ((config_bits & PARODD) == 0)
|
||
cr1_config &= ~USART_CR1_PS;
|
||
else
|
||
cr1_config |= USART_CR1_PS;
|
||
|
||
if ((config_bits & MASK_STOP) == STOP0B5)
|
||
USARTx->CR2 = (0x1 << 12);
|
||
else if ((config_bits & MASK_STOP) == STOP1B)
|
||
USARTx->CR2 = (0x0 << 12);
|
||
else if ((config_bits & MASK_STOP) == STOP1B5)
|
||
USARTx->CR2 = (0x3 << 12);
|
||
else /* if ((config_bits & MASK_STOP) == STOP2B) */
|
||
USARTx->CR2 = (0x2 << 12);
|
||
|
||
for (i = 0; i < NUM_BAUD; i++)
|
||
if (brr_table[i].baud_spec == baud_spec)
|
||
break;
|
||
|
||
if (i >= NUM_BAUD)
|
||
return -1;
|
||
|
||
USARTx->BRR = brr_table[i].brr_value;
|
||
|
||
if ((config_bits & MASK_FLOW))
|
||
USARTx->CR3 = USART_CR3_CTSE | USART_CR3_RTSE;
|
||
else
|
||
USARTx->CR3 = 0;
|
||
|
||
if (!(config_bits & MASK_MODE))
|
||
cr1_config |= USART_CR1_RE;
|
||
|
||
USARTx->CR1 = cr1_config;
|
||
|
||
/* SCEN (smartcard enable) should be set _after_ CR1. */
|
||
if ((config_bits & MASK_MODE))
|
||
{
|
||
if ((config_bits & MASK_MODE) == MODE_SMARTCARD)
|
||
{
|
||
USARTx->GTPR = (1 << 8) | 5;
|
||
USARTx->CR3 |= (USART_CR3_SCEN | USART_CR3_NACK);
|
||
}
|
||
else if ((config_bits & MASK_MODE) == MODE_IRDA)
|
||
USARTx->CR3 |= (1 << 1);
|
||
else if ((config_bits & MASK_MODE) == MODE_IRDA_LP)
|
||
USARTx->CR3 |= (1 << 2) | (1 << 1);
|
||
}
|
||
|
||
return 0;
|
||
}
|
||
|
||
|
||
void
|
||
usart_init0 (int (*cb) (uint8_t dev_no, uint16_t notify_bits))
|
||
{
|
||
int i;
|
||
|
||
ss_notify_callback = cb;
|
||
|
||
for (i = 0; i < NUM_USART; i++)
|
||
{
|
||
if (usart_array[i].stat)
|
||
usart_array[i].stat->dev_no = i + USART_DEVNO_START;
|
||
chopstx_claim_irq (usart_array[i].intr, usart_array[i].irq_num);
|
||
}
|
||
|
||
/* Enable USART2 and USART3 clocks, and strobe reset. */
|
||
RCC->APB1ENR |= ((1 << 18) | (1 << 17));
|
||
RCC->APB1RSTR = ((1 << 18) | (1 << 17));
|
||
RCC->APB1RSTR = 0;
|
||
}
|
||
|
||
#define UART_STATE_BITMAP_RX_CARRIER (1 << 0)
|
||
#define UART_STATE_BITMAP_TX_CARRIER (1 << 1)
|
||
#define UART_STATE_BITMAP_BREAK (1 << 2)
|
||
#define UART_STATE_BITMAP_RINGSIGNAL (1 << 3)
|
||
#define UART_STATE_BITMAP_FRAMING (1 << 4)
|
||
#define UART_STATE_BITMAP_PARITY (1 << 5)
|
||
#define UART_STATE_BITMAP_OVERRUN (1 << 6)
|
||
|
||
static int
|
||
handle_intr (struct USART *USARTx, struct rb *rb2a, struct usart_stat *stat)
|
||
{
|
||
int tx_ready = 0;
|
||
uint32_t r = USARTx->SR;
|
||
int notify_bits = 0;
|
||
int smartcard_mode = ((USARTx->CR3 & USART_CR3_SCEN) != 0);
|
||
|
||
if (smartcard_mode)
|
||
{
|
||
if ((r & USART_SR_TC))
|
||
{
|
||
tx_ready = 1;
|
||
USARTx->CR1 &= ~USART_CR1_TCIE;
|
||
}
|
||
}
|
||
else
|
||
{
|
||
if ((r & USART_SR_TXE))
|
||
{
|
||
tx_ready = 1;
|
||
USARTx->CR1 &= ~USART_CR1_TXEIE;
|
||
}
|
||
}
|
||
|
||
if ((r & USART_SR_RXNE))
|
||
{
|
||
uint32_t data = USARTx->DR;
|
||
|
||
/* DR register should be accessed even if data is not used.
|
||
* Its read-access has side effect of clearing error flags.
|
||
*/
|
||
asm volatile ("" : : "r" (data) : "memory");
|
||
|
||
if ((r & USART_SR_NE))
|
||
stat->err_rx_noise++;
|
||
else if ((r & USART_SR_FE))
|
||
{
|
||
/* NOTE: Noway to distinguish framing error and break */
|
||
|
||
stat->rx_break++;
|
||
notify_bits |= UART_STATE_BITMAP_BREAK;
|
||
}
|
||
else if ((r & USART_SR_PE))
|
||
{
|
||
stat->err_rx_parity++;
|
||
notify_bits |= UART_STATE_BITMAP_PARITY;
|
||
}
|
||
else
|
||
{
|
||
if ((r & USART_SR_ORE))
|
||
{
|
||
stat->err_rx_overrun++;
|
||
notify_bits |= UART_STATE_BITMAP_OVERRUN;
|
||
}
|
||
|
||
/* XXX: if CS is 7-bit, mask it, or else parity bit in upper layer */
|
||
if (rb_ll_put (rb2a, (data & 0xff)) < 0)
|
||
stat->err_rx_overflow++;
|
||
else
|
||
stat->rx++;
|
||
}
|
||
}
|
||
else if ((r & USART_SR_ORE))
|
||
{ /* Clear ORE */
|
||
uint32_t data = USARTx->DR;
|
||
asm volatile ("" : : "r" (data) : "memory");
|
||
stat->err_rx_overrun++;
|
||
notify_bits |= UART_STATE_BITMAP_OVERRUN;
|
||
}
|
||
|
||
if (notify_bits)
|
||
{
|
||
if ((*ss_notify_callback) (stat->dev_no, notify_bits))
|
||
stat->err_notify_overflow++;
|
||
}
|
||
|
||
return tx_ready;
|
||
}
|
||
|
||
static int
|
||
handle_tx (struct USART *USARTx, struct rb *rb2h, struct usart_stat *stat)
|
||
{
|
||
int tx_ready = 1;
|
||
int c = rb_ll_get (rb2h);
|
||
|
||
if (c >= 0)
|
||
{
|
||
uint32_t r;
|
||
int smartcard_mode = ((USARTx->CR3 & USART_CR3_SCEN) != 0);
|
||
|
||
USARTx->DR = (c & 0xff);
|
||
stat->tx++;
|
||
r = USARTx->SR;
|
||
if (smartcard_mode)
|
||
{
|
||
if ((r & USART_SR_TC) == 0)
|
||
{
|
||
tx_ready = 0;
|
||
USARTx->CR1 |= USART_CR1_TCIE;
|
||
}
|
||
}
|
||
else
|
||
{
|
||
if ((r & USART_SR_TXE) == 0)
|
||
{
|
||
tx_ready = 0;
|
||
USARTx->CR1 |= USART_CR1_TXEIE;
|
||
}
|
||
}
|
||
}
|
||
|
||
return tx_ready;
|
||
}
|
||
|
||
int
|
||
usart_send_break (uint8_t dev_no)
|
||
{
|
||
struct USART *USARTx = get_usart_dev (dev_no);
|
||
if (USARTx == NULL)
|
||
return -1;
|
||
|
||
if ((USARTx->CR1 & 0x01))
|
||
return 1; /* Busy sending break, which was requested before. */
|
||
|
||
USARTx->CR1 |= 0x01;
|
||
return 0;
|
||
}
|
||
|
||
int
|
||
usart_block_sendrecv (uint8_t dev_no, const char *s_buf, uint16_t s_buflen,
|
||
char *r_buf, uint16_t r_buflen,
|
||
uint32_t *timeout_block_p, uint32_t timeout_char)
|
||
{
|
||
uint32_t timeout;
|
||
uint8_t *p;
|
||
int len;
|
||
uint32_t r;
|
||
uint32_t data;
|
||
struct USART *USARTx = get_usart_dev (dev_no);
|
||
int smartcard_mode = ((USARTx->CR3 & USART_CR3_SCEN) != 0);
|
||
struct chx_intr *usartx_intr = get_usart_intr (dev_no);
|
||
struct chx_poll_head *ph[1];
|
||
|
||
if (usartx_intr == NULL)
|
||
return -1;
|
||
|
||
ph[0] = (struct chx_poll_head *)usartx_intr;
|
||
|
||
p = (uint8_t *)s_buf;
|
||
if (p)
|
||
{
|
||
if (smartcard_mode)
|
||
usart_config_recv_enable (USARTx, 0);
|
||
|
||
USARTx->CR1 |= USART_CR1_TXEIE;
|
||
|
||
/* Sending part */
|
||
while (1)
|
||
{
|
||
chopstx_poll (NULL, 1, ph);
|
||
|
||
r = USARTx->SR;
|
||
|
||
/* Here, ignore recv error(s). */
|
||
if ((r & USART_SR_RXNE) || (r & USART_SR_ORE))
|
||
{
|
||
data = USARTx->DR;
|
||
asm volatile ("" : : "r" (data) : "memory");
|
||
}
|
||
|
||
if ((r & USART_SR_TXE))
|
||
{
|
||
if (s_buflen == 0)
|
||
break;
|
||
else
|
||
{
|
||
/* Keep TXEIE bit */
|
||
USARTx->DR = *p++;
|
||
s_buflen--;
|
||
}
|
||
}
|
||
|
||
chopstx_intr_done (usartx_intr);
|
||
}
|
||
|
||
USARTx->CR1 &= ~USART_CR1_TXEIE;
|
||
if (smartcard_mode)
|
||
{
|
||
if (timeout_block_p && (*timeout_block_p))
|
||
do
|
||
r = USARTx->SR;
|
||
while (((r & USART_SR_TC) == 0));
|
||
|
||
usart_config_recv_enable (USARTx, 1);
|
||
|
||
if (timeout_block_p && *timeout_block_p == 0)
|
||
{
|
||
/* Ignoring the echo back. */
|
||
do
|
||
r = USARTx->SR;
|
||
while (((r & USART_SR_TC) == 0));
|
||
|
||
if ((r & USART_SR_RXNE))
|
||
{
|
||
data = USARTx->DR;
|
||
asm volatile ("" : : "r" (data) : "memory");
|
||
}
|
||
|
||
*timeout_block_p = timeout_char;
|
||
}
|
||
}
|
||
|
||
chopstx_intr_done (usartx_intr);
|
||
}
|
||
|
||
if (r_buf == NULL)
|
||
return 0;
|
||
|
||
if (!p)
|
||
if (smartcard_mode)
|
||
usart_config_recv_enable (USARTx, 1);
|
||
|
||
/* Receiving part */
|
||
r = chopstx_poll (timeout_block_p, 1, ph);
|
||
if (r == 0)
|
||
return 0;
|
||
|
||
p = (uint8_t *)r_buf;
|
||
len = 0;
|
||
|
||
while (1)
|
||
{
|
||
r = USARTx->SR;
|
||
|
||
data = USARTx->DR;
|
||
asm volatile ("" : : "r" (data) : "memory");
|
||
|
||
if ((r & USART_SR_RXNE))
|
||
{
|
||
if ((r & USART_SR_NE) || (r & USART_SR_FE) || (r & USART_SR_PE))
|
||
/* ignore error, for now. XXX: ss_notify */
|
||
;
|
||
else
|
||
{
|
||
*p++ = (data & 0xff);
|
||
len++;
|
||
r_buflen--;
|
||
if (r_buflen == 0)
|
||
{
|
||
chopstx_intr_done (usartx_intr);
|
||
break;
|
||
}
|
||
}
|
||
}
|
||
else if ((r & USART_SR_ORE))
|
||
{
|
||
data = USARTx->DR;
|
||
asm volatile ("" : : "r" (data) : "memory");
|
||
}
|
||
|
||
chopstx_intr_done (usartx_intr);
|
||
timeout = timeout_char;
|
||
r = chopstx_poll (&timeout, 1, ph);
|
||
if (r == 0)
|
||
break;
|
||
}
|
||
|
||
return len;
|
||
}
|