deon/chopstx
1
0
Fork 0
Code Issues Pull Requests Projects Releases Wiki Activity

Add Nucleo

Browse Source
This commit is contained in:
NIIBE Yutaka
2015-07-30 20:35:21 +09:00
parent a9de53c36b
commit 1d38c24233
4 changed files with 65 additions and 1 deletions
Download Patch File Download Diff File Expand all files Collapse all files

2
AUTHORS
View File

@@ -9,6 +9,8 @@ Kaz Kojima:
Kenji Rikitake:
Added ST Dongle support.
board/board-st-dongle.h
Added ST Nucleo F103 support.
board/board-st-nucleo-f103.h
NIIBE Yutaka:
Write the library:

7
ChangeLog
View File

@@ -1,6 +1,11 @@
2015-07-30 Niibe Yutaka <gniibe@fsij.org>
* board/board-st-nucleo-f103.h: New. Contributed by Kenji
Rikitake.
2015-07-29 Niibe Yutaka <gniibe@fsij.org>
* board/board-st-dongle.h: New.
* board/board-st-dongle.h: New. Contributed by Kenji Rikitake.
* board/board-*.h (FLASH_PAGE_SIZE): Remove.

12
NEWS
View File

@@ -1,6 +1,18 @@
NEWS - Noteworthy changes
* Major changes in Chopstx 0.07
Released 2015-07-31
** New board support: ST Nucleo F103
It is contributed by Kenji Rikitake.
** New board support: ST Dongle
It is contributed by Kenji Rikitake.
It's the ST-Link/V2-1 part of ST Nucleo F103.
* Major changes in Chopstx 0.07
Released 2015-07-15

45
board/board-st-nucleo-f103.h Normal file
View File

@@ -0,0 +1,45 @@
#define BOARD_NAME "ST Nucleo F103"
#define BOARD_ID 0x9b87c16d
/*
* Please add X3 and USB cable to ST Nucleo F103.
*
* Solder X3 XTAL of 8MHz (and put C33 and C34 of 22pF).
* Solder the bridges for R35 and R37, since it's 0 ohm.
*
* (Optional) Remove SB54 and SB55.
*
* At CN10, connect USB cable
* Vbus RED --> 10 NC ----------> CN7 (6 E5V)
* D+ GREEN --> 12 PA11 ---[1K5]--> CN6 (4 3V3)
* D- WHITE --> 14 PA12
* GND BLACK --> 20 GND
*/
#define STM32F10X_MD /* Medium-density device */
#define STM32_PLLXTPRE STM32_PLLXTPRE_DIV1
#define STM32_PLLMUL_VALUE 9
#define STM32_HSECLK 8000000
#define GPIO_LED_BASE GPIOA_BASE
#define GPIO_LED_SET_TO_EMIT 5
#undef GPIO_USB_BASE /* No external DISCONNECT/RENUM circuit. */
#undef GPIO_OTHER_BASE
/*
* Port A setup.
* PA0 - input with pull-up. AN0
* PA1 - input with pull-up. AN1
* PA5 - Push pull output 50MHz (LED 1:ON 0:OFF)
* PA11 - Push Pull output 10MHz 0 default (until USB enabled) (USBDM)
* PA12 - Push Pull output 10MHz 0 default (until USB enabled) (USBDP)
* ------------------------ Default
* PAx - input with pull-up
*/
#define VAL_GPIO_LED_ODR 0xFFFFE7FF
#define VAL_GPIO_LED_CRL 0x88388888 /* PA7...PA0 */
#define VAL_GPIO_LED_CRH 0x88811888 /* PA15...PA8 */
#define RCC_ENR_IOP_EN RCC_APB2ENR_IOPAEN
#define RCC_RSTR_IOP_RST RCC_APB2RSTR_IOPARST